• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.191-198
• /
• 2018

The objective of this study was to determine the effects of combination of air temperature and soil water contents on growth, physiological disorder rate, and yield of garlic. This experiments has been carried out in the typical plastic house (one side open and other side installed ventilation fans) which was maintained gradient air temperature (maximum different value of air temperature : $6^{\circ}C$). The excessive irrigation (EI) set at $0.34m^3/m^3$ soil moisture contents. The significant differences found in the growth parameters of garlics as affected by air temperature and soil moisture conditions. The plant height of garlic with combination of ambient $(A)+6^{\circ}C$ and optimal irrigation (OI; set at $0.22m^3/m^3$ soil moisture contents) treatments represented 47.4 cm/plant, which was the highest among all the tested treatments. The leaf length and width showed the greatest, which were 16.1 and 2.4 cm/plant, respectively, in $A+6^{\circ}C-OI$. The physiological disorder ratio was higher as 12.9% at $A+6^{\circ}C-OI$ and was not occurred at ambient temperature with EI compared with OI treatment. The bulb and clove weight were dramatically decreased at $A+6^{\circ}C$ temperature treatment. The yields were decreased by 51% in OI at $A+6^{\circ}C$ and $A+3^{\circ}C$ temperature treatment. Those results indicated that yields were decreased and ratio of physiological disorders was increased by high temperature treatments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.31-48
• /
• 2019

The artificial ground freezing (AGF) method is a groundwater cutoff and/or ground reinforcement method suitable for constructing underground structures in soft ground and urban areas. The AGF method conducts a freezing process by employing a refrigerant circulating through a set of embedded freezing pipes to form frozen walls serving as excavation supports and/or cutoff walls. However, thermal expansion of the pore water during freezing may cause excessive deformation of the ground. On the other hand, as the frozen soil is thawed after completion of the construction, mechanical characteristics of the thawed soil are changed due to the plastic deformation of the ground and the rearrangement of soil fabric. This paper performed a field experiment to evaluate the freezing rate of marine clay in the application of the AGF method. The field experiment was carried out by circulating liquid nitrogen, which is a cryogenic refrigerant, through one freezing pipe installed at a depth of 3.2 m in the ground. Also, a piezo-cone penetration test (CPTu) and a lateral load test (LLT) were performed on the marine clay before and after application of the AGF method to evaluate a change in strength and stiffness of it, which was induced by freezing-thawing. The experimental results indicate that about 11.9 tons of liquid nitrogen were consumed for 3.5 days to form a cylindrical frozen body with a volume of about $2.12m^3$. In addition, the strength and stiffness of the ground were reduced by 48.5% and 22.7%, respectively, after a freezing-thawing cycle.

• Journal of Life Science
• /
• v.31 no.6
• /
• pp.550-558
• /
• 2021

Fructus Corni, the fruit of Cornus officinalis, has long been used for the prevention and treatment of various diseases. We recently suggested that it was effective against benign prostatic hyperplasia (BPH). In this study, we investigated the inhibitory effect of Corni Fructus (CF) water extract on BPH induced by testosterone propionate (TP) in noncastrated and castrated animal models. BPH was induced in Sprague Dawley rats by an intramuscular injection of TP in castrated or noncastrated rats. Finasteride (FINA) treatment was used as a positive control for inhibition of BPH. According to our results, CF administration inhibited excessive enlargement of development of the prostate in both the noncastrated and castrated groups compared to the control and FINA-treated groups. The inhibitory effect of CF on BPH was associated with inhibition of expression of hypoxia-inducible factor-1α, 5α-reductase type 2, steroid receptor coactivator-1, androgen receptor (AR), and prostate-specific antigen. Serum levels of the stress hormone cortisol increased during BPH induction by TP in both the noncastrated and castrated groups, but they were attenuated significantly by CF administration. However, insulin and IGF-1 levels were not increased in the BPH-induced groups and CF, and no effective results were found by CF administration. These results point to a beneficial effect of CF on BPH through inhibition of AR signaling pathway activity and imply that CF shows excellent potential as a therapeutic agent for the prevention and treatment of BPH.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.2
• /
• pp.90-96
• /
• 2023

The aim of this study was to investigate the effect of application rate of rice straw compost on soil chemical properties and soil organic carbon stock (SOC stock). The experiments were performed with no fertilizer (NF), inorganic fertilizer (NPK), NPK + rice straw compost 7.5 ton ha^-1 (NPKC7.5), NPK + rice straw compost 15 ton ha^-1 (NPKC15), NPK + rice straw compost 22.5 ton ha^-1 (NPKC22.5), and NPK + rice straw compost 30 ton ha^-1 (NPKC30). The SOC and SOC stock were highest in the NPKC30 treatment at 22.8 g kg^-1 and 71.2 Mg C ha^-1, respectively. Rice production was in the range of 621.2-654.4 kg 10a^-1 in NPKC22.5 and NPKC30 treatments, which was higher than that in the NPK treatment. However, with increase in compost application, the exchangeable K and Ca of the soil increased, and the exchangeable K and Ca were higher than the optimum range in NPKC22.5 and NPKC30 treatments. Excessive application of compost can have negative impacts on the environment, including nutrient accumulation in the soil and water pollution from nutrient runoff. Therefore, applying the standard amount of compost according to the agricultural environment would be appropriate, despite the relatively lower rice production and SOC stock than that observed with the application of 22.5 and 30 ton ha^-1.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.4
• /
• pp.287-304
• /
• 2007

This study was carried out to investigate spatio-temporal variations of benthic environment and macrobenthic polychaete communities in Gamak Bay where excessive organic matters from untreated sewage effluents and fish and shellfish farming activities have been accumulated in certain regions. Such environmental variables as sediment composition, organic content, acid volatile sulfide and dissolved oxygen content etc. were measured and polychaete specimens were taken in September 1999 and February 2000. In September 1999, organic contents were up to three times higher in the northwestern part of the bay and the area closed to Gukdong harbor than in the rest of the bay. In particular, benthic environment of the northwestern part of the bay was extremely deteriorated by the occurrence of hypoxia and highly concentrated sulfide. Of 28 stations investigated in summer, 5 stations located in the northwestern part were azoic. In the rest of the stations, a total of 119 polychaete species were sampled with a mean density of 900 $ind./m^2$. While species richness was higher in the entrance and central part of the bay where water exchanges with open sea were relatively active, density was higher in the moderately enriched stations neighbouring Gukdong harbor and fish farms where such potential indicators of organic pollution as Aphelochaeta monilaris, Lumbrineris longifolia were largely dominant. In February 2000, a total of 81 polychaete species appeared with a mean density of 2,802 $ind./m^2$ from 12 stations sampled in winter. Azoic areas were recolonized by Capitella capitata, Pseudopolydora paucibranchiata and Dipolydora socialis which showed maximum density in the innermost station. On the other hand, the rest of the stations were dominated by Euchone alicaudata and Praxillella affinis. The configuration of the stations sampled in summer and winter on the multidimensional scaling plots reflected the position of each stations within the bay in which there were great differences in organic content, sulfide concentration and oxygen content rather than in sediment composition. Therefore, heterogeneities in polychaete community structure in Gamak Bay were primarily influenced by the degree of the disturbance depending on the position within the bay.

• Journal of Nutrition and Health
• /
• v.9 no.1
• /
• pp.84-91
• /
• 1976

Chemical determination were made to analyze the concentration of nutrients including proximate composition, vitamins, minerals, amino acids and fatty acids in three kinds of locally produced infantile formula milk(DFM) and one fermented milk(FM). An attempt was also made to compare the analytical values of nutrients against guaranteed values. The results obtained are summarized as follows; 1. The analyzed value of protein and fat content in DFM-A.B.C was slightly lower than that of guaranteed values and a reverse trend was observed in the case of total carbohydrate. There were no differences in proximate composition among the three kinds of DFM. It was found that the FM contained less protein and fat than the fresh milk, but it seemed that a considerable amount of sugar was added to FM. 2. The analyzed values of vitamin $A(2{\sim}3\;times)$ and $E(4{\sim}6\;times)$ contents in DFMS were higher than those of the guaranteed values except niacin. There were a little differences in vitamin contents among DFMS analyzed. 3. In the case of minerals, the analyzed values were similar to the guaranteed values except the calcium concentration that analyzed value was much higher than guaranted value. When the DFMS were diluted to 15% by adding water to compare with the human and fresh cow milk, it was found that the diluted DFMS resembled the human milk rather than cow milk in the content of energy, carbohydrates, protein and ash. The higher contents of iron and most vitamins in the diluted DFMS than the human milk or cow milk would indicate that they were fortificated with these nutrients. When these diluted DFMS were compared with the Korean R.D.A. for infant, it was clear that they could supply sufficient amount of the nutrients required by R.D.A. except the niacin which failed to reach the recommended level. The fact that iron content of DFM-C was not sufficient while vitamin A supply was excessive by 6 fold would indicate that further studies for the improvement may be necessary. 4. There was a little difference among DFMS in amino acid composition. The similarity of the essential amino acids composition between DFMS and cow milk indicated that there was no modification of the essential amino acids. However, present data showed that the amino acid compositon of FM was similar to that of the cow milk. 5. There was no difference among DFMS in the degree of saturation of fatty acids. The similar or higher levels of essential fatty acids contents of DFMS as compared with human milk revealed that essential fatty acids were added to DFMS during the course of process. From the experimental results described above, it may be concluded that the nutritive effects of three kinds of locally produced DFMS were much alike. It was also found that macro and micro nutrient composition except amino acid composition of locally produced dried formula milk was very much similar to that of the human milk. Moreover, fortification of iron and vitamins resulted in improving their nutritive values as the single form of infantile food, but it seemed that more consideration should be given on the fortification of some nutrients.

• Journal of Venture Innovation
• /
• v.5 no.3
• /
• pp.57-70
• /
• 2022

In modern industrial capitalism, the relationship between the provision of work and the receipt of wages has become an important principle governing society. According to the labor contract, the wages provided by entrusting the right to dispose of one's labor to the employer are directly compensated, and human life should be guaranteed and reproduced with proper rest. The establishment of labor relations under free contracts represents a problem in protecting workers, and accordingly, the maximum of working hours is set as a minimum right for workers, and the standard for minimum rest is set and assigned. The reduction of working hours is very important in terms of the quality of life of workers, but it is also an important issue in efficient corporate activities. As of 2020, Korea has 1,908 hours of annual working hours, the third lowest among OECD 37 countries in the happiness index surveyed by the Sustainable Development Solution Network(SDSN), an agency under the United Nations. Accordingly, the necessity of reducing working hours has been recognized, and the maximum working hours per week has been limited to 52 hours since 2018. In this situation, various working hours are legally excluded as a way to maintain the company's value-added creation and meet the diverse needs of workers, and Korea's Labor Standards Act restricts flexible working hours within three months, flexible working hours exceeding three months, selective working hours, and extended working hours. However, in the discussion on the application of the revised flexible working hours system in 2021 and the expansion of the settlement unit period recently discussed, there is a problem with the flexible working hours system, which needs to be improved. Therefore, this paper aims to examine the problems of the flexible working hours system and improvement measures. The flexible working hours system is a system that does not violate working hours even if the legal working hours are exceeded on a specific day or week according to a predetermined standard, and does not have to pay additional wages for excessive overtime work. It is mainly useful as a form of shift work in manufacturing, sales service, continuous business or electricity, gas, water, and transportation for long-term operations. It is also used as a way to shorten working hours, such as expanding holidays through short working days. However, if the settlement unit period is expanded, it is disadvantageous to workers as the additional wages that workers can receive will not be received. Therefore, First, in order to expand the settlement unit period currently under discussion, additional wages should be paid for the period expanded from the current standard. Second, it is necessary to improve the application of the flexible working hours system to individual workers to have sufficient consultation with individual workers in a written agreement with the worker representative, Third, clarify the allowable time for extended work during the settlement unit period, and Fourth, limit the daily working hours or apply to continuous rest. In addition, since the written agreement of the worker representative is an important issue in the application of the flexible working hours system, it is necessary to secure the representation of the worker representative.