• 한국환경보건학회지
• /
• 제39권2호
• /
• pp.166-177
• /
• 2013

Objectives: The genus Legionella is common in aquatic environments. Some species of Legionella are recognized as potential opportunistic pathogens for human, notably Legionella pneumophila that causes, Legionellosis. Thus, we investigated the contamination of Legionella pneumophila on water supply systems in Seoul, including cooling towers, public baths, hospitals and fountains. Methods: The existence of 16S rRNA and mip gene of L. pneumophila was confirmed in the genome of the isolated strains by PCR. Results: During the summer season of 2010 and 2011, Legionella pneumophila were detected from 163 samples (21.1%) out of 772 samples collected. Among the 163 strains of L. pneumophila, eighty one isolates belonged to serogroup 1 (57.4%), 23 isolates were serogroup 5 (16.3%), 21 isolates were serogroup 6 (14.9%), 8 isolates were serogroup 2 (5.79%), and 8 isolates were identified in serogroup 3 (5.7%). Through PFGE (pulsed-field gel electrophoresis) analysis using Sfi I, genetic types of L. pneumophila were classified into five (A to E) patterns by the band similarity with excess of 70% from public baths. Conclusions: The PFGE patterns of the serotypes showed a tendency for diversity of L. pneumophila. Our results suggest the existence of serological and genetic diversity among the L. pneumophila isolates.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.460-473
• /
• 2017

In order to certificate the contamination assessment of heavy metals in surface sediments from the Nakdong river. Surface sediments were collected of 24 sampling sites (main 14st., tributary 10st.) and analyzed for grain size heavy metals contents. Study area mainly composed of sand (avg. 94.1%) and mean grain size was $1.46{\Phi}$ on average. Heavy metals contents (avg. Al: 12.5%, Zn; 74.4, Cr: 45.3, Li: 26.0, Pb: 17.1, Ni: 10.5, Cu: 7.8, Cd: 0.22 mg/kg) were relatively high contents in the composed of fine sediments. In addition, the results of pearson's correlation coefficient showed that most heavy metals and grain size (silt and clay) were highly correlated. The contents of Zn (6st.) and Ni (1st.) evaluated as moderately polluted, Zn (6st.) evaluated as LEL when compared with sediment quality standard of USEPA and Ontario sediment quality guidelines. Most heavy metals contents were I levels that dose not affected the benthos when compared with sediment pollution evaluation standard of NIER. The results of EX, EF, Igeo and CF showed the contents of Zn, Pb and Cd exceed the background contents and distributing of anthropogenic pollution and evaluated as moderately polluted level. And Nm-08 were relatively high level of contamination in the study area. However as results of PLI (less than 1), all sampling sites were evaluated unpolluted level.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.57-68
• /
• 2004

연약점토지반에 성토 등의 상재하중을 재하하게 되면 측방유동이라고 하는 측방변위가 발생하게 된다. 이 측방유동은 파일기초의 변형, 교대의 이동, 지중매설관의 파괴 등 성토에 인접한 지중구조물에 피해를 가하게 된다. 그렇지만, 측방유동은 체적변형과 전단변형도 동시에 발생할 뿐만 아니라 이 측방유동에 영향을 미치는 인자가 많기 때문에 측방유동에 의해서 발생하는 측방토압의 발생 메커니즘이 아직 명확히 밝혀지지 않았다. 그리고 최근 근접시공 등 기존구조물에 근접해서 공사가 진행되는 경우가 많아 이러한 근접구조물에 어떠한 피해를 가할 것인가 또는 대책공법을 설계하기 위한 설계하중으로서 측방토압을 구해야 하는 필요성이 커지고 있는 것 또한 현실이다. 그러므로 본 연구에서는 성토에 의해서 연약지반에 발생하는 측방토압에 미치는 재하속도의 영향을 조사하기 위해서 실내모형실험을 실시하였다. 그 결과, 측방토압이 삼각형 분포를 이룬다는 것과 재하속도가 빠를수록 측방토압의 최대치가 커지고 부등침하가 커진다는 것을 알 수 있었다. 그리고 이러한 재하속도의 영향은 부의 dilatancy에 의한 과잉간극수압의 발생에 기인한다는 것을 알았다.

• 동의생리병리학회지
• /
• 제22권1호
• /
• pp.60-81
• /
• 2008

This thesis is written about the causes, the processes and the treatments of edema. It consists of 31 chapters. Covering 11 chapters, there are prescriptions and constructions. When one of the organs fails to work metabolizing water, you can have edema. It is the result of the accumulation of excess fluid under the skin. Edema most commonly occurs in the head facial, the palpebral portion, the feet and legs or all the body. Sometimes it is accompanied with ascites. There are three classifications in the thesis. First, according to the cause and the symptom of disease, it is divided into 5 types. Type 1. The swelling caused by the disorder of the lungs from the troubling wind. Type 2. The swelling caused by the weak spleen. Type 3. The swelling caused by abnormal condition between the kidneys and the lungs. Type 4. The swelling in abdomen caused by the weak kidneys. Type 5. The swelling (Yellow sweat) caused by the heat inside body as water outside. Second, the swelling and the abnormal symptom of five viscera. Third, the swelling accompanied with menstruation in female and with chilliness. In short, the original textbook is showed that the treatment of edema focuses on the cause and the region of fluid accumulation. When the swelling is in the upper body or the cause of diseaseis outside, the useless humidity can be expelled through sweating. On the other hand, when the swelling is in the lower body or the cause of disease is inside, it is pushed out by urination. In this book, the author presents further treatments. And these treatments are often cited by doctors after ages. Even one of them suggested that the swelling be divided by cosmic dual forces. In spite of many researches, it is too complicate for us to understand the writer’s intend. For that reason, comparing with other medical books and referring to guides explained by doctors, I have studied the textbook to help understand.

• 한국광물학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2007

물유리, 수산화 마그네슘, 리튬염을 이용하여 $90{\pm}5^{\circ}C$에서 2단계로 수열반응시켜 팽윤성이 우수한 $12\;{\AA}$ 헥토라이트를 합성하였다. 합성과정은 우선 $SiO_{2}$ 성분을 약 30% 함유한 물유리와 수산화 마그네슘을 화학양론적 조성으로 물에 혼합하고 교반시키면서 pH를 $6{\sim}8$로 유지시켰다. 그 후 수용액을 $90{\pm}5^{\circ}C$의 온도에서 1차로 반응시켜 슬러리 형태의 전구체(precursor)를 제조하였으며 이것을 세척하여 과잉염을 제거하였다. 이때, 리튬 (ie, LiCl)을 팔면체 치환용 이온으로 혼합하였다. 위와 같이 제조된 수용액을 약 10시간 동안 위와 동일한 온도에서 2차로 반응시켜 겔 형태의 헥토라이트를 생성시켰다. 합성된 헥토라이트의 분말 X-선 회절패턴은 자연산 헥토라이트와 일치하였고 FE-SEM으로 관찰한 결과, 직경 50 nm의 균질한 입자로 이루어져 있었다. 이온교환능력과 팽윤성을 측정한 결과, 각각 90 cmol/kg, $60{\sim}70\;ml/2\;g$으로 확인되었으며 에칠렌글리콜 처리 후, 저면간격은 $12\;{\AA}$에서 $17.4\;{\AA}$으로 이동하였다.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.433-453
• /
• 1999

There are a lot of elements affecting the success of implant prosthesis. The quality of surgical procedure is considered as one of the key factors. To avoid the excess heat generation is an important element of successful osseointegration and it can be achieved by using a gentle surgical technique with a sharp instrument in bone drilling. This study was performed to measure and analyze comparatively the heat transmitted to sur-rounding bone at a distance of 0.5mm from the periphery of the drill hole in each drilling stage. The results were as follows. In standard system, the temperature of surrounding bone tissue ranged from $29.2^{\circ}C\;to\;48.3^{\circ}C$ with irrigation and from $34.6^{\circ}C\;to\;84.3^{\circ}C$ without irrigation. And in wide system, the temperature of surrounding bone tissue ranged from $29.5^{\circ}C\;to\;52.5^{\circ}C$ with irrigation and from $34.8^{\circ}C\;to\;87.8^{\circ}C$ without irrigation. And the temperature ranges exceeded the threshold without irrigation, while showing less than the threshold by the cooling effect of irrigation. In comparing standard system with wide system, although there was no significant difference, ${\phi}4.3mm$ pilot and ${\phi}4.3mm$ twist drill of wide system showed high value and wide system showed slightly high elevation of temperature in all depth in fixture installation. In the finite element analysis, the calculated value by the Fourier's cooling law were applied to the bone drilling surface. And through analysis using different irrigation temperatures at $28^{\circ}C,\;15^{\circ}C\;and\;5^{\circ}C$, and according to the time. The result was that the cooling water at least below $15^{\circ}C$ was required to maintain the temperature of surrounding bone less than threshold in bone drilling, the cooling water below $5^{\circ}C$ was required to gain more sufficient cooling effect, and cooling over 5 seconds was needed after bone drilling for sufficient effect.

• Journal of Radiation Protection and Research
• /
• 제20권2호
• /
• pp.79-83
• /
• 1995

과거 물분자와 전리방사선과의 상호작용에 의하여 생성된 방사능 극소입자에 관한 많은 연구결과가 보고되어 왔다. 특히 최근연구에서는 물분자의 방사성분해 에 의해 발생한 높은 농도의 수산화래디칼은 실내의 유기가스와 반응 후 저증기압의 화합물로 변하여 극소입자를 형성한다고 알려져왔다. 본 연구에서는 라돈의 첫째딸핵종인 Po-218에 대한 대기가스와 물분자와의 상호의존성을 조사할 목적으로, 실내가스의 최적제어가 가능한 라돈챔버를 사용하여 일련의 실험을 수행하였다. 제작된 정전기분광계를 사용하여 라돈의 첫째딸핵종인 Po-218이온에 대해 $0.07-5.0cm^2/V\;sec$ 범위의 이동도스펙트럼을 측정하였으며, 대기가스로 0.5ppm에서 5ppm까지의 $SO_2$가스를 사용하여 실험결과를 분석하였다. 라돈챔버내에 물분자의 첨가와 동 물분자의 방사성분해에 의하여 생성된 수산화래디칼에 의한 극소입자들의 형성과정을 확인하였으며 $PoO_x^+$ 이온 주변에 $SO_2$가스가 부착하면서 일어나는 화학반응에 대한 화학적 동특성연구를 수행하였다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.518-523
• /
• 2010

In this study, partially stabilized zirconia was synthesized using a chemical $Y_2O_3$ stabilizer and hydrothermal method. First, $YCl_3-6H_2O$ and $ZrCl_2O-8H_2O$ was dissolved in distilled water. Y-TZP (a $Y_2O_3$-doped toughened zirconia polycrystalline precursor) was also prepared by conventional co-precipitates in the presence of an excess amount of $NH_4OH$ solution under a fixed pH of 12. The Y-TZP precursors were filtered and repeatedly washed with distilled water to remove $Cl^-$ ions. $ZrO_2$-Xmol%$Y_2O_3$ powder was synthesized by a hydrothermal method using Teflon Vessels at $180^{\circ}C$ for 6 h of optimized condition. The powder added with the Xmol%- $Y_2O_3$ (X = 0,1,3,5 mol%) stabilizer of the $ZrO_2$ was synthesized. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens of $33mm{\times}8mm{\times}3$ mm for three-point bend tests were used in the mechanical properties evaluation. A teragonal phase was observed in the samples, which contains more than 3 mol% $Y_2O_3$. The $3Y-ZrO_2$ agglomerated particle size was measured at $7.01{\mu}m$. The agglomerated particle was clearly observed in the sample of 5 mol % $Y_2O_3-ZrO_2$, and and the agglomerated particle size was measured at 16.4 um. However, a 20 nm particle was specifically observed by FE-SEM in the sample of 3 mol% $Y_2O_3-ZrO_2$. The highest bending fracture strength was measured as 321.3 MPa in sample of 3 mol% $Y_2O_3-ZrO_2$.

• 한국환경과학회지
• /
• 제23권10호
• /
• pp.1703-1718
• /
• 2014

An eco-friendly integrated multi-trophic aquaculture (IMTA) farming technique was developed with the goal of resolving eutrophication by excess feed and feces as fish-farming by-products. A variety of seaweed species were tried to remove inorganic nutrients produced by fish farming. However, there have been few trials to use Sargassum fulvellum in an IMTA system, a species with a relatively wide distribution across regions with various habitat conditions, great nutrient removal efficiency and importance for human food source and industrial purposes. In this regard, our study tried to examine feasibility of using S. fulvellum in an IMTA system by analyzing growth characteristics of the species in an IMTA system comprising of rockfish (Sebastes shlegeli), sea cucumber (Stichopus japonocus) and the tried S. fulvellum (October 2011 - November 2012). We also monitored environment conditions around the system including current speed, water temperature and inorganic nutrient level as they may affect growth of S. fulvellum. S. fulvellum in the IMTA system, which were $15.72{\pm}5.67mm$ long at the start of the experiment in October 2011, grew to a maximum of $1093{\pm}271.13mm$ by May 2012. In September, seaweed growth was reduced to a minimum of $280{\pm}70.43mm$ in length. Then, S. fulvellum began to grow again reaching $325{\pm}196.19mm$ by November 2012. Wet weight of the seaweed was $4.01{\pm}1.89g$ at the start of the experiment and reached a maximum of $109.26{\pm}34.23g$ in May. The weight gradually declined to a low of $15.12{\pm}8.40g$ in September 2012. Weight began to increase once more, rising to $39.27{\pm}21.69g$ by November. During the experiment, the average velocity at the surface and the bottom was 6.5 cm/s and 3.4 cm/s, respectively. The water temperature ranged $5.0-23.5^{\circ}C$, which was considered suitable for growing S. fulvellum. Results of the study indicated no significant differences in inorganic nutrients between pre- and post-IMTA installation. It was thus concluded that S. fulvellum can be a suitable seaweed species to be used in an IMTA system.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.521-528
• /
• 2013

일반적으로 도시배수 시스템은 개수로 흐름으로 설계 된다. 그러나 설계빈도를 초과하는 강우발생 시 배수 시스템의 합류부 또는 맨홀 등에서 부분적인 과부하 흐름이 발생되고 있다. 그러므로 이와 같은 과부하 흐름에 의해 발생하는 배수 시스템에서의 압력흐름에 대한 연구의 필요성이 제기 되고 있다. 따라서 본 연구에서는 설계빈도를 초과 하는 강우사상 그리고 예측할 수 없는 집중호우 시 맨홀에서의 과부하 흐름에 관한 연구를 수행 하였다. 배수 시스템에서의 압력흐름의 문제점은 과부하 맨홀로부터의 월류량에 의한 도시홍수 발생이다. 그러므로 배수 시스템은 개수로 흐름으로 설계 되어야 할 뿐만 아니라 과부하 흐름 발생 시 맨홀내의 에너지 손실을 고려한 압력흐름의 해석이 필요하다. 따라서 본 연구에서는 과부하 맨홀의 에너지 손실을 고려하여 압력흐름을 해석 할 수 있는 수치모형을 개발하였다. 수치모형을 검증하기 위하여 수리모형실험 결과와 비교 검증하였고, 도시유출해석에 가장 널리 이용되는 SWMM의 결과와도 비교하였다. SWMM은 맨홀 내의 에너지 손실을 적절히 반영하지 못함으로써 맨홀 수심을 과소 산정하는 결과를 보인 반면, 본 연구 모형은 수리모형실험결과와 잘 일치하였다.