• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.321-329
• /
• 2018

Classic braced walls use struts and wales to minimize ground movements induced by deep excavation. However, the installation of struts and wales is a time-consuming process and confines the work space. To secure a work space around the retaining structure, an anchoring system works in conjunction with a braced wall. However, anchoring cannot perform well when the shear strength of soil is low. In such a case, innovative retaining systems are required in excavation. This study proposes an innovative earth-retaining wall that uses in situ soil confined in dual sheet piles as a structural component. A numerical study was conducted to evaluate the stability of the proposed structure in cohesionless dry soil and establish a design chart. The displacement and factor of safety of the structural member were monitored and evaluated. According to the results, an increase in the clearance distance increases the depth of safe excavation. For a conservative design to secure the stability of the earth-retaining structure in cohesionless dry soil, the clearance distance should exceed 2 m, and the embedded depth should exceed 40% of the wall height. The results suggest that the proposed method can be used for 14 m of excavation without any internal support structure. The design chart can be used for the preliminary design of an earth-retaining structure using in situ soil with dual steel sheet piles in cohesionless dry soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.605-613
• /
• 2008

Application of anchored or strutted wall system for the earth retention of excavation works in a populated urban area or a poor soil deposit can be limited due to various restrictions. Since the strut becomes longer in a wide excavation site, the stability of an earth retaining wall is decreased, the wall deformation is increased, and the ground settlement is also increased due to an increased buckling or bending deformation of struts. Especially, in a populated urban area, the installation of anchors can be problematic due to the property line of adjacent structures or facilities. Thus, a new concept of earth retaining system like Self-Supported diaphragm Wall can solve several problems expected to occur during excavation in the urban area. Application of self-supported counterfort diaphragm wall was verified in this paper though comparing the design of self-supported counterfort diaphragm wall with the data monitored during excavation in Singapore.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.123-136
• /
• 1997

구조물의 형상 변화를 연속적으로 고려할 수 있는 유한요소법 원리에 기초하여 탄성지반내에 단계적 터널굴착시 임의의 굴착단계에서 발생한 증분변위와 굴착전 암반내에 존재하는 초기응력의 크기가 선형관계에 있음을 유도하였다. 즉, 총변위가 아닌 임의 단계에서 계측된 증분변위만으로 탄성지반내 초기음력의 역산이 가능함을 이론적으로 증명하였다. 이러한 이론적 관계식에 기초하여 다단계 터널굴착시 계측된 증분변위를 이용하여 초기응력을 역산할 수 있는 역해석 프로그램을 작성하였다. 간단한 예제를 통하여 구성한 프로그램의 정확성과 현장 적용 가능성을 검토하였다.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.339-348
• /
• 2022

The bored tunneling method is generally preferred for urban tunnel construction, However the cut & cover tunnel is still necessary for special conditions, such as metro station and access structures. In some case, deep excavation for cut & cover construction is planed of irregular and unusual shape, as a consequence, the convex and concave corner is often encountered during that excavation. In particular, discontinuity or imbalance of the support structure in the convex corner can lead to collapse, which may result in damages and casualties. In this study, the behavior of the convex corner of retaining structure were investigated using 3-dimensional numerical models established to be able to simulate the split-shaped behavior of convex corners. To improve the stability in the vicinity of the convex corner, several stabilizing measures were proposed and estimated numerically. It is found that linking two discretized wales at the convex corner can effectively perform the control of deformation. Furthermore, it was also confirmed that the stabilizing measures can be enhanced when the tie-material linking two discretized wales is installed at the depth of the maximum wall deflection.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.7-14
• /
• 2003

본 연구의 목적은 계측변위를 이용한 흙막이 벽체의 역해석시 예기치 못한 하중으로 인해 발생한 이상변위의 누적에 의한 오차를 최소화할 수 있는 기법을 개발하는 것이다. 이를 위해 단계별 변위증분으로 목적함수를 구성하고, 목적함수를 최소화시키는 최적화기법으로 직접탐색법중 유용방향법에 의한 순차선형계획법을 도입하여 역해석 프로그램을 개발하였다. 또한, 모형토조실험을 실시하여 측정된 실제변위와 예측변위를 비교$.$분석함으로써 개발된 역해석 프로그램의 신뢰성을 검증하였다.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.237-249
• /
• 1994

A new type of cut method, called SK-cut, was developed in order to overcome the shortcomings of the conventional V-cut and Burn-cut blasting methods. Total 190 times of test blasts were performed for the evaluation of the efficiency of new blasting method. V-cut, Burn cut and SK-cut were compared by applying them to the excavation of main gallery and construction tunnel of underground oil storage cavern. Test results showed that excavation efficiency of the new method was increased by 5.9~9.8% and that specific charge was reduced to 71~92%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.147-179
• /
• 2002

The important role of observational method in geotechnical engineering are emphasized together with the direction of future development, concerning successful application of the technique on the site investigation, design and feed back at various construction stages. Case histories on the application of feed back are introduced in order to achieve the most economical and reliable construction for tunnel, rock slope and deep excavations through feed back system at design and construction stages. Also the limitations and advantages of the observational method and the role of feed back system are discussed for construction of tunnel, rock slope and deep excavation in hard ground such as layered ground conditions including weathered, soft and hard rocks.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.351-358
• /
• 1998

현장에서 측정된 절리 trace 길이에 의거하여 영속성을 산정할 수 있는 통계적 분석법을 개발하였다. 이 방법에서는 잠재적 키블록과 불연속면의 상대적인 규모에 따라 절리 trace 기링 또는 원형절리의 직경에 대한 확률밀도분포를 이용한다. 대규모 지하공동의 설계 및 안전적 굴착에 대한 개발된 분석법의 활용성을 설명하기 위하여 규모 및 영속성이 다른 잠재적 키블록의 안정성을 고찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.265-272
• /
• 2001

Excavation in a big city is different from excavation in a local area because construction methods and stability are directly connected in a loss of life. Especially, estimate of rock mass slope stability is excuted by more detail and safty work. In this study, we are made reserches in rock mass slope stability and safety method that the slope is closed by elementary school in a big city. The result of many field study and numerical analysis is shown up direct reinforcement used to anchor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.696-708
• /
• 2002

Seismic Reflection Methods(TSP, HSP) have been applied in the junction between 2nd Adit and Main Tunnel (Solan Tunnel) of Youngdiong Railroad(Mt. Dongbaek∼Dokye). In this paper, methods and case study will be introduced to predict discontinuties in the tunnel before excavation by the Seismic Reflection Methods(TSP, HSP)and secure construction stability of the tunnel in blasting and excavation.