Browse > Article
http://dx.doi.org/10.12989/gae.2018.16.3.321

Feasibility study of an earth-retaining structure using in-situ soil with dual sheet piles  

An, Joon-Sang (Department of Civil Engineering, Inha University)
Yoon, Yeo-Won (Department of Civil Engineering, Inha University)
Song, Ki-Il (Department of Civil Engineering, Inha University)
Publication Information
Geomechanics and Engineering / v.16, no.3, 2018 , pp. 321-329 More about this Journal
Abstract
Classic braced walls use struts and wales to minimize ground movements induced by deep excavation. However, the installation of struts and wales is a time-consuming process and confines the work space. To secure a work space around the retaining structure, an anchoring system works in conjunction with a braced wall. However, anchoring cannot perform well when the shear strength of soil is low. In such a case, innovative retaining systems are required in excavation. This study proposes an innovative earth-retaining wall that uses in situ soil confined in dual sheet piles as a structural component. A numerical study was conducted to evaluate the stability of the proposed structure in cohesionless dry soil and establish a design chart. The displacement and factor of safety of the structural member were monitored and evaluated. According to the results, an increase in the clearance distance increases the depth of safe excavation. For a conservative design to secure the stability of the earth-retaining structure in cohesionless dry soil, the clearance distance should exceed 2 m, and the embedded depth should exceed 40% of the wall height. The results suggest that the proposed method can be used for 14 m of excavation without any internal support structure. The design chart can be used for the preliminary design of an earth-retaining structure using in situ soil with dual steel sheet piles in cohesionless dry soil.
Keywords
Earth-retaining structure using in situ soil; dual steel sheet pile; numerical analysis; cohesionless dry soil; preliminary design chart;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Adalier, K., Ahmed, W. and Geoffrey, R. (1998), "Foundation liquefaction countermeasures for earth embankments", J. Geotech. Geoenviron. Eng., 124 (6), 500-517.   DOI
2 Ashour, M. and Ardalan, H. (2012), "Analysis of pile stabilized slopes based on soil-pile interaction", Comput. Geotech., 39, 85-97.
3 Bransby, P.L. and Milligan, G.W.E. (1975), "Soil deformations near cantilever sheet pile walls", Geotechnique, 25 (2), 175-195.   DOI
4 Cai, Y., Ruan, L., Wu, S. and Chen, Y. (1999), "Finite element analysis and application of deep excavation with retaining structure of double-row piles in soft clay", J. Build. Struct., 4, 9.
5 Cakir, T. (2014), "Backfill and subsoil interaction effects on seismic behavior of a cantilever wall", Geomech. Eng., 6(2), 117-138.   DOI
6 Cakir, T. (2017), "Assessment of effect of material properties on seismic response of a cantilever wall", Geomech. Eng., 13(4), 601-619.   DOI
7 Chatterjee, J. and Amini, F. (2011), "A comparative assessment of slope stability of New Orleans I-wall with partial gap between the wall and layered cohesive backfill", Geomech. Geoeng., 6(3), 217-225.   DOI
8 Chatterjee, J. and Amini, F. (2013), "A comparative slope stability analysis of sheet pile supported I-wall in New Orleans, Louisiana with sheet pile penetrating into sand layer", Geomech. Geoeng., 8(3), 202-208.   DOI
9 Crawford, R. and Byfield, M.P. (2002). "A numerical model for predicting the bending strength of Larssen steel sheet piles", J. Construct. Steel Res., 58(10), 1361-1374.   DOI
10 Cui, H.H., Zhang, L.Q. and Zhao, G.J. (2006), "Numerical simulation of deep foundation pit excavation with double-row piles", Rock Soil Mech., 27(4), 662-666.   DOI
11 Dai, Z. (2002), "Study on distribution laws of landslide-thrust and resistance of sliding mass acting on antislide piles", Chin. J. Rock Mech. Eng., 21(4), 517-521.   DOI
12 Ismeik, M. and Shaqour, F. (2015), "Seismic lateral earth pressure analysis of retaining walls", Geomech. Eng., 8(4), 523-540.   DOI
13 Finno, R.J., Atmatzidis, D.K. and Perkins, S.B. (1989), "Observed performance of a deep excavation in clay", J. Geotech. Eng., 115(8), 1045-1064.   DOI
14 Ham, S.M., Kwon, T.H., Chang, I. and Chung, M.K. (2016), "Ultrasonic P-wave reflection monitoring of soil erosion for erosion function apparatus", Geotech. Test. J., 39(2), 301-314,
15 Hyundai Steel (2014), Hyundai Steel Product Guide, .
16 Jamshidi, R., Towhata, I., Ghiassian, H. and Tabarsa, A.R. (2010), "Experimental evaluation of dynamic deformation characteristics of sheet pile retaining walls with fiber reinforced backfill", Soil Dyn. Earthq. Eng., 30 (6), 438-446.   DOI
17 Jeong, H.G. and Seo, Y.S. (2013), "Slope stability analysis and landslide hazard assessment in tunnel portal area", J. Kor. Tunn. Undergr. Sp. Assoc., 15 (4), 387-400.   DOI
18 Kouichi, O., Kunio, T., Yutaka, K. and Keisuke, S. (1988), "Static analysis model for double sheet-pile wall structures", J. Geotech. Eng., 114 (7), 810-825.   DOI
19 Kim, C., Kwon, J., Im, J.C. and Hwang, S. (2012), "A method for analyzing the self-supported earth-retaining structure using stabilizing piles", Mar. Georesour. Geotechnol., 30(4), 313-332.   DOI
20 Kim, T.H. (2008), "An experimental study on the behavior of Earth retaining wall using self-supported stabilizing piles", M.Sc. Thesis, Pusan National University, Busan, Korea.
21 KSSC (2003) Steel Structures Design Standard by Allowable Stress Design, Korean Society of Steel Construction (in Korean).
22 Kwon, T.H., Oh, T.M., Choo, Y.W., Lee, C., Lee, K.R. and Cho, G.C. (2013), "Geomechanical and thermal responses of hydrate-bearing sediments subjected to thermal stimulation: Physical modeling using a geotechnical centrifuge", Energy Fuel, 27(8), 4507-4522.   DOI
23 Kwon, T.H. and Ajo-Franklin, J. (2013), "High-frequency seismic response during permeability reduction due to biopolymer clogging in unconsolidated porous media", Geophysics, 78(6), EN117-EN127.   DOI
24 Kwon, T.H. and Cho, G.C. (2009), "Evolution of compressional wave velocity during $CO_2$ hydrate formation in sediments", Energy Fuel, 23(11), 5731-5736.   DOI
25 Kwon, T.H. and Cho, G.C. (2005), "Smart geophysical characterization of particulate materials in a laboratory", Smart Struct. Syst., 1(2), 217-233.   DOI
26 Lee, C.J., Chen, H.T., Wei, Y.C., Lin, Y.C., Huang, W.S. and Chiang, K.H. (2007), "Centrifuge modeling of a self-supported double soldier-piled wall in sandy soil", J. GeoEng., 2(3), 97-109.
27 Nian, T.K., Xu, H.Y. and Liu, H.S. (2012), "Several issues in three-dimensional numerical analysis of slopes reinforced with anti-slide piles", Rock Soil Mech., 33(8), 2521-2535.   DOI
28 Masatoshi, S. (1974), "Lateral behavior of a double sheet pile wall structure", Jap. Soc. Soil Mech. Found. Eng., 14(1), 45-59.
29 Nago, H. and Shiro, M. (1984), "Pore water pressure in sand bed under oscillating water pressure", Memoirs School Eng. Okayama Univ., 19(1), 13-32.
30 NAVFAC (1986), DM 7.2, Foundations and Earth Structures, Department of the Navy, Naval Facilities Engineering. Command, Alexandria, Virginia, U.S.A.
31 Noh, D.H., Ajo-Franklin, J.B., Kwon, T.H. and Muhunthan, B. (2016), "P and S wave responses of bacterial biopolymer formation in unconsolidated porous media", J. Geophys. Res. Biogeosci., 121(4), 1158-1177.
32 Sim, J.U., Jeong, S.S. and Lee, J.H. (2015), "Numerical analysis of self-supported earth retaining wall with stabilizing piles", J. Kor. Geotech. Soc., 31(5), 35-46.   DOI
33 PLAXIS B.V. (2014), PLAXIS 2D Anniversary Edition Manuals, .
34 Qu, H.L., Li, R.F., Hu, H.G., Jia, H.G. and Zhang, J.J. (2016), "An approach of seismic design for sheet pile retaining wall based on capacity spectrum method", Geomech. Eng., 11(2), 309-323.   DOI
35 Shin, D.W. and Kim, K.H. (2015), "Analysis of construction process and cost of self-supported retaining wall method using two row H-pile", Korea Sci. Art Forum, 19, 425-434.   DOI
36 Susumu, I. and Tomohiro, K. (1993), "Finite element analysis of earthquake induced damage to anchored sheet pile quay walls", Japan. Soc. Soil Mech. Found. Eng., 33(1), 71-91.
37 Sim, J.U., Park, K.B., Son, S.G. and Kim, S.I. (2009), "A study on the behavior analysis and construction method of the self-supported Earth retaining wall(SSR) using landslide stabilizing piles", J. Kor. Geotech. Soc., 25(1), 41-54.
38 Song, K.I., Cho, G.C., Chang, S.B. and Lee, I.M. (2013), "Beam-spring structural analysis for the design of a tunnel pre-reinforcement support system", Int. J. Rock Mech. Min. Sci., 59, 139-150.   DOI
39 Stewart, D.P., Jewell, R.J. and Randolph, M.F. (1994), "Design of piled bridge abutments on soft clay for loading from lateral soil movements", Geotechnique, 44 (2), 277-296.   DOI
40 Taisaku, M., Hiroaki, A., Hiroshi, Y., Kunio, T. and Yoshihaki, K. (1995), "Static behavior of double sheet-pile wall structures with high rigidity partitions", Kawasaki Steel Giho, 27(4), 242-247.
41 Nyby, D.W. (1981), "Finite element analysis of soil-sheet pile interaction", Ph.D. Dissertation, Utah State University, Utah, U.S.A.
42 Xiang, Y.Z., Goh, A.T.C., Zhang, W.G. and Zhang, R.H. (2018), "A multivariate adaptive regression splines model for estimation of maximum wall deflections induced by braced excavation", Geomech. Eng., 14(4), 315-324.   DOI
43 Tefera, T., Nordal, S., Grande, L., Sandven, R. and Emdal, A. (2006), "Ground settlement and wall deformation from a large scale model test on a single strutted sheet pile wall in sand", Int. J. Phys. Model. Geotech., 6(2), 1-13.