• 유통과학연구
• /
• 제17권9호
• /
• pp.83-92
• /
• 2019

Purpose - This research is to verify job fitness, empowerment, and recognition of career development support having the influence on formation of occupational identity in Korean food franchise distribution company. Research design, data, and methodology - Total 600 copies have been distributed and 394 copies have been collected, the covariance structure analysis has been implemented to verify the presented research hypothesis. Results - Demand fit and competency fit being the lower level of job fitness appeared not to have significant influence on occupational identity, and also these do not have the significant influence on the empowerment. Even though formal career development support being lower level of career development recognition appeared to have significant influence on empowerment, nonformal career development support appeared not to have significant influence on empowerment. Formal career development support and nonformal career development support appeared to have significant influence on occupational identity. Finally, empowerment appeared to have significant influence on occupational identity. Conclusions - It is implied that the psychological and subjective success felt in employee's career course may be improved by the job related job fitness, the initiative being individual characteristic and formal and formless career development support being organizational characteristic.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.24-33
• /
• 2015

This study aims to suggest wastewater treatment options for diaper recycling by identifying characteristic analysis of wastewater from diaper recycling process and efficiency evaluation of wastewater treatment units. The wastewater characteristic analysis showed that the concentration of organic pollutants and ionic materials were very high comparing to seawater. Through the investigation of similar wastewater treatment, six treatment units were identified to reduce pollutants. It is found UF(ultra-filtration), DAF(dissolved air flotation), fenton oxidation, electro-coagulation and chemical-coagulation are effective in reducing organic pollutants while membrane system and ion exchanger are effective in reducing ionic materials. Even though the target of water quality should be secured in terms of managing organic pollutants level, the application of treatment unit for reducing ionic material needs lots of considerations. This result suggests that reuse of pulping wastewater after controlling organic pollutants is better than direct discharge of pulping wastewater. To select the appropriate wastewater treatment unit, an economic analysis about operation condition, wastewater flow, cost, efficiency should be considered.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.23-29
• /
• 2013

In recent years, development of energy conversion systems using hydrogen as an energy source has been accelerated globally. Even though hydrogen is an environment-friendly energy source, safety and effectiveness issues in storage, transportation, and usage of hydrogen should be clearly resolved in every application. Therefore, sensors for detecting hydrogen leakage, especially for fuel cell electric vehicles, should be designed to have much higher resolution and accuracy in comparison with conventional gas sensors. In this study, we conducted to determine the design parameters for the semiconductor hydrogen sensor with optimized sensing conditions under the thermal distribution characteristic and thermal transfer characteristic. The heat generation study on power supply voltage was studied for correlation analysis of thermal energy according to the power supply voltage variation from 1.0 voltage to 10.0 voltage every 0.5 voltage. And we studied for the temperature coefficient of resistance with hydrogen sensor.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.195-207
• /
• 2016

In this study, we examined the influence of the pigment characteristic and dyeing condition on dyeing properties and functionality by using Perilla Frutescens L. Britt extracts, in which ethanol, distilled water and NaOH solution were used as 3 different solvents. Changes in dyeing conditions include variations in dye concentration, dyeing temperature, time and pH on dye uptake, and K/S values were compared according to these changes. Additionally, color changes were observed according to the use and types of mordant. Ultraviolet-visible spectrum was utilized to investigate the pigment characteristic, and as a result, chlorophyll was identified in ethanol extract, whereas tannin was identified both in distilled water extract and NaOH solution extract. By using FT-IR analysis, these tannins in distilled-water-extract and NaOH solution extract were verified to be hydrolyzable tannin. When dyeing silk, dye uptake increased as dye concentration, dyeing temperature and time increased, while it decreased as pH of the extract increased. Fabrics dyed without a mordant produced Y-series colors, and fabrics dyed with mordants showed various colors depending on the mordant types. Even though color fastness to washing and light was unsatisfactory, fastness to rubbing and perspiration showed relatively high grade. Moreover, deodorant ability of dyed fabric improved.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.32-39
• /
• 2008

after using dom die, this sheet pressed from a variation condition of size, of die holder power,of rpm speed, accordingly the kind of material, the conditionof deformation movement between both sheets is analyzed, is investigated in the Press machine. even if the change quantity which formed raises a blank holder pressure, the change quantity which is special is not visible from the segment where there is not a bead, the segment where there is a bead to the other side does change quantity schedule to initially and the features of press holding power which the change quantity diminishes is showed consequently from pressurization change quantity it is visible but until a rupture territory from the rpm, it goes but the features where the change quantity does not change a lot is observationd, from the CR2-sheet the quality comes out though well but a possibility of getting a result under same conditions of AL-sheet does not become the formation which stands is. It is like that though press-die which uses the drawing-sheet it exchanges the sheets, when AL-sheet with doing, the conclusion for maintain which have a formation sincerity healthy characteristic is same with afterwords.

• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.71-75
• /
• 2015

The flow and noise characteristics of the regenerative blower are evaluated experimentally. To decrease the noise of regenerative blower at a high frequency, we arrange the impeller vanes unevenly by special formula. The uneven pitch formular consists of the combination of trigonometric function. The magnitude of degree between each vanes and the control parameters of trigonometric functions are main design parameters for the uneven pitch. The flow characteristics of even and uneven impellers are tested by the fan tester and compared each results. The efficiency of a blower is calculated by the axial power using a dynamo system. The noise property of designed impeller is measured in an anechoic room. In this study, we certify that the uneven pitch impeller is effective in the noise reduction at a high frequency.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.218-222
• /
• 2003

전자파 방사 및 측정 시험설비로 표준 시험장인 야외시험장을 사용하고 있으나 시험장 구축의 어려움으로 이를 대체할 수 있는 대용시험장을 사용하여 측정시험을 할 수 있도록 하고 있다. 본 논문에서는 최적화된 측정시스템을 구성하기 위한 대용시험시설인 GTEM CELL(Gigahertz Transverse Electro Magnetic Cell)의 구조분석 및 설계를 하기 위하여 내부도체(Septum)의 넓이 및 두께 변화에 따른 내부도체의 특성임피던스 변화를 살펴보았다.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.35-42
• /
• 2008

In this study, a sample was fabricated according to the recycled aggregate replacement level(0%, 30%, 60%), and the steel fiber mixing status in order to use recycled aggregate as a concrete alternative coarse aggregate, and then the materials and structural characteristics of recycled aggregate and steel fiber which impacted the reinforced concrete were analyzed. A conclusion was derived as follows. After considering the results of various material experiments and mock-up test, when a flexural strength and a ductility factor is increased and the replacement level is increased through mixing the steel fiber with the recycled aggregate concrete, the ductility and flexural strength reduction seems to be inhibited by adding the steel fiber. Also, it is indicated that the recycled aggregate has almost-similar compressive strength, tensile strength flexural strength and ductility capacity to the concrete which using the general gone even though the steel fiber is used and the replacement level is increased to 30%. Accordingly, the reinforced concrete frame using the steel fiber mixture and recycled aggregate seems to apply to the actual structure.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.144-149
• /
• 2014

A strategy for phase identification of precipitates in high Al-containing austenitic and ferritic steels using electron diffraction (ED) is studied. Comparative studies of the various Al-containing precipitates (k-carbide, $Ni_3Al$, $Fe_3Al$, FeAl) show the similarities of crystal structure and lattice parameter. However, the slight differences of lattice parameter and structure display characteristic ED patterns (EDPs) which can be identified. $L1_2$ k-carbide and $Ni_3Al$ can be differentiated by the length of ${\rightarrow}_g$ (the reciprocal lattice vector), even though they show perfectly identical shapes of EDPs. $DO_3$ $Fe_3Al$ and $B_2$ FeAl show the characteristic EDs in [110] and [112] beam directions due to the differences of Fe site occupancies in unit cells. k-carbide, $Ni_3Al$, and FeAl show also the similar EDs in [112], [112], and [110] beam directions, respectively. All the possible similarities of EDs among each phases and the strategy for phase identification are discussed on the bases of kinematical ED simulation.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2130-2141
• /
• 2002

A unique technique to estimate the magnitude or contribution ratio of each stage backlash in a system with a two-stage gear reducer is proposed. The concept to estimate the magnitude or contribution ratio of each stage backlash is based on the change of frequency response characteristic, in particular, the change of anti-resonant frequency and resonant frequency, due to the change of each stage backlash magnitude, even though the total backlash magnitude of a system with a two-stage gear reducer is constant. The validity of the technique is verified in a seeker gimbal and satisfactory results are obtained. It is thought that the diagnosis and maintenance of the manufacturing machines and systems with two-stage gear reducers will become more efficient and economical by virtue of the proposed technique.