• 한국해양공학회지
• /
• 제28권6호
• /
• pp.517-526
• /
• 2014

The leakage of cryogenic LNG through cracks in the insulation membrane of an LNG carrier causes the hull structure to experience a cold spot as a result of the heat transfer from the LNG. The hull structure will become brittle at this cold spot and the evaporated natural gas may potentially lead to a hazard because of its flammability. This paper presents a computational model for the LNG flow and heat diffusion in an LNG insulation panel subject to leakage. The temperature distribution in the insulation panel and the speed of gas diffusion through it are simulated to assess the safety level of an LNG carrier subject that experiences a leak. The behavior of the leaked LNG is modeled using a multiphase flow that considers the mixture of liquid and gas. The simulation model considers the phase change of the LNG, gas-liquid multiphase interactions in the porous media, and accompanying rates of heat transfer. It is assumed that the NO96-GW membrane storage is composed of glass wool and plywood for the numerical simulation. In the numerical simulation, the seepage, heat diffusion, and evaporation of the LNG are investigated. It is found that the diffusion speed of the leakage is very high to accelerate the evaporation of the LNG.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.202-208
• /
• 2015

Objectives: This study determined the effect of the air-stream application time and the bonding technique on the dentin bond strength of adhesives with different solvents. Furthermore, the content and volatilization rate of the solvents contained in the adhesives were also evaluated. Materials and Methods:Three adhesive systems with different solvents (Stae, SDI, acetone; XP Bond, Dentsply De Trey, butanol; Ambar, FGM, ethanol) were evaluated. The concentrations and evaporation rates of each adhesive were measured using an analytical balance. After acid-etching and rinsing, medium occlusal dentin surfaces of human molars were kept moist (conventional) or were treated with 10% sodium hypochlorite for deproteinization. After applying adhesives over the dentin, slight air-stream was applied for 10, 30 or 60 sec. Composite cylinders were built up and submitted to shear testing. The data were submitted to ANOVA and Tukey's test (${\alpha}=0.05$). Results: Stae showed the highest solvent content and Ambar the lowest. Acetone presented the highest evaporation rate, followed by butanol. Shear bond strengths were significantly affected only by the factors of 'adhesive' and 'bonding technique' (p < 0.05), while the factor 'duration of air-stream' was not significant. Deproteinization of dentin increased the bond strength (p < 0.05). Stae showed the lowest bond strength values (p < 0.05), while no significant difference was observed between XP Bond and Ambar. Conclusions: Despite the differences in content and evaporation rate of the solvents, the duration of air-stream application did not affect the bond strength to dentin irrespective of the bonding technique.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권3호
• /
• pp.20-26
• /
• 2004

2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD)로 오염된 토양의 현장 광분해 정화 과정에서 가장 중요한 이동 메커니즘인 지표에서의 증발 및 광분해에 의한 유기 용매의 이류 상방향 이동에 대한 수식화와 모델 개발을 수행하였다. 각 유체 분포에 대한 다상 유동 효과, 구동력으로서의 중력, k-S-p 관계의 정확한 묘사를 위한 van Genutchen 방정식을 포함한 유한요소법 기반의 수치 모델을 제안하였다. 실험실 규모의 비포화 토양 컬럼 내 용매 이동에 중요한 영향을 미치는 인자들을 조사하기 위하여 수행한 계산의 결과들을 제시하였다. 중력은 고투수성 토양의 유체 분포와 증발에 상당한 영향을 미쳤다. 토양의 종류 또한 증발 과정 중 유체 포화도 분포에 큰 영향을 미친다. 용매의 이류 이동량은 증발량이 증가할수록 초기 물 포화도가 감소할수록 증가하였다. 본 연구에서 수행한 시뮬레이션은 개발된 모델이 토양 환경 내에서 유기 용매의 이류 이동에 영향을 미치는 다양한 인자들의 영향을 분석하는데 유용함을 보여준다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.330-330
• /
• 2016

The quantification of dry season evaporation in regions, where the magnitude of dry season flows is key to the regional water supply, is essential for good water management. Also, tree transpiration has a significant role in the water balance of a catchment whenever it is tree populated, especially in water limited environments. Such is the case in the Middle Mountains of Nepal where dry season flows play a significant role in downstream water provisioning and their proper functioning is key to the welfare of millions of people. This research seeks to study the transpiration of a pine forest stand in the Jikhu Khola Watershed in the Middle Mountains of Nepal. To the author's knowledge, no single study has been made so far to estimate the dry season evaporation from the planted forest stand in the Middle Mountains of Nepal. The study was carried out in planted pine forest embedded within the Jikhu Khola Catchment. Field campaigns of sap flow measurements were carried out from September, 2010 to February, 2011 in the selected plot of 15*15m dimension, to characterize dry season evaporation. This was done by measuring sap fluxes and sapwood areas over the six trees of different Diameter at Breast Height (DBH) classes. The sap flux was assessed using Granier's thermal dissipation probe (TDP) technique while sapwood area was determined using several incremental core(s) taken with a Pressler borer and immediately dyeing with methyl orange for estimating the actual depth of sapwood area. Transpiration of the plot was estimated by considering the contribution of each tree class. For this purpose, sap flux density, sapwood area and the proportion of total canopy area were determined for each tree class of the selected plot. From these data, hourly and diurnal transpiration rates for the plot were calculated for experimental period. Finally, Cienciala model was parameterized using the data recorded by the ADAS and other terrain data collected in the field. The calibrated model allowed the extrapolation of Sap flux density (v) over a six month period, from September 2010 to February 2011. The model given sap flux density was validated with the measured sap flux density from Grainier method.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.119-124
• /
• 2023

In this study, experimental approach of the measurement of condensation and evaporation heat transfer coefficients is discussed for mixed refrigerants using in the ultra low-temperature cooling system for semiconductor etching process. An experimental apparatus was described performing the condensation and evaporation heat transfer measurements for mixed refrigerants. The mixed refrigerant used in this study was composed of the optimal mixture determined in previous research, with a composition of Ar:R14:R23:R218 = 0.15:0.4:0.15:0.3. The experiments were conducted over a temperature range from -82℃ to 15℃ and at pressures ranging from 18.5 bar to 5 bar. The convection heat transfer coefficients of the mixed refrigerant were measured at flow rates corresponding to actual operating conditions. The condensation heat transfer coefficient ranged from approximately 0.7 to 0.9 kW/m2K, while the evaporation heat transfer coefficient ranged from 1.0 to 1.7 kW/m2K. The detailed discussion of the experimental methods, procedures, and results were described in this paper.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.146-151
• /
• 2005

• 한국작물학회지
• /
• 제53권1호
• /
• pp.93-101
• /
• 2008

The effects of $CO_2$ enrichment on growth of maize (Zea mays L.) were examined. Parameters analyzed include growth characteristics, yields, photosynthetic rates, evaporation rates and photosynthesis-related characteristics under elevated $CO_2$. The plants were grown in growth chambers with a 12-h photoperiod and a day/night temperature of $28/21^{\circ}C$ at the seedling stage and $30/23^{\circ}C$ from the silking stage. The plants were exposed to two elevated $CO_2$ of 500, 700ppm and ambient levels (350 ppm). Chalok 1 and GCB 70 germinated three days after seeding, and germination rates were faster in the elevated $CO_2$ than the control. Germination rates displayed significant differences among the $CO_2$ treatments. At the seedling stage, leaf area, top dry weight, and photosynthetic rates, and plant height indicated positive relationship with elevated $CO_2$ concentrations. At the $5{\sim}6$ leaf stage, $CO_2$ concentration also indicated positive relationship with plant height, leaf area, top dry weight, and photosynthetic rates. At the silking stage, increased plant height of Chalok 1 was noted in the $CO_2$ treatments compared to the control. No significant differences were noted for GCB 70, in which leaf area decreased but photosynthetic rates increased progressively with $CO_2$ concentration. Stomatal aperture was a little bigger in the elevated $CO_2$ than the control. $CO_2$ concentration was negatively related to stomatal conductance and transpiration rates, resulting in high water use efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.108-111
• /
• 2000

The Zns thin films were deposited on non-alkali glass substrate by the Hot Wall method. The thin films grown at various evaporation cell and substrate temperature were characterized by spectrophotometer and X-ray diffraction to investigate the optical and structural characteristics. The deposition rates were increased with increasing the cell temperature, and were decreased with increasing substrate. The optical characteristics of thin films depends on the deposition rates. The band gap energies measured at room temperature with 3.4~3.5eV are smaller than the theoretical value of 3.54eV. All ZnS thin films are oriented in (111) of the principal direction of a zincblende structure.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.323-333
• /
• 2005

Effects of gases to growth of $SiO_2$ nanowires were characterized. $N_2$, Ar, and $O_2$ gas's effect were determined. $SiO_2$ nanowires growth scheme was varied by kind and flow rates of gases because of amounts of $O_2$. Flow rates of gases and kind of substrates affected nanowires' diameters, lengths and morphologies of grown nano wires. With increasing flow rates of gases, nanowire's diameter increased because of additional VS and SLS reactions. By TEM characterization, We knows that, grown $SiO_2$ nanowires on Si substrate showed two shell structures. These shapes of nanowires were formed by reaction of additional SLS growth. Grown $SiO_2$ nanowires showed blue luminescence by PL characterization These Blue luminescence was due to quantum confinement effect and oxygen vacancies in the nanowires.

• 한국진공학회지
• /
• 제13권2호
• /
• pp.59-64
• /
• 2004

반도체 레이저를 광원으로 사용하는 원자흡수분광 방법으로 금속증기의 증착 공정을 감시하는 연구를 수행하였다. 전자빔 가열 방식을 이용하여 gadolinium (Gd) 금속을 대량으로 증발시켰다. 파장 영역이 770-794 nm (중심파장 780 nm)인 반도체 레이저빔과 388-396 nm 영역의 제 2 고조파 빔을 진공용기에 입사시켜 증발되는 금속증기의 원자흡수 스펙트럼을 실시간으로 기록하였다. 흡수 스펙트럼을 분석하여 증기의 원자밀도를 구했다. 전자빔 출력을 변화시키면서 측정한 원자밀도를 수정 결정 모니터 장치를 사용하여 측정한 증착률과 비교하였다. 산업적으로 많이 사용되는 Ti 등의 증착 공정 감시에 이 실험에서 구현한 레이저 분광장치를 적용할 수 있다는 것을 제시하였다.