• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.115-126
• /
• 2018

A new urban paradigm that moves from a vehicle-centric to pedestrian-centric culture should be considered to improve the quality of the pedestrian environments for women, children, senior citizens, and disabled persons as well as to promote community unification by providing general movement rights to everyone. This study was implemented to provide decent alternatives to improve street spaces. The street spaces around the Commercial and Residential Area No.1 located in the Administrative-Centered City, Sejong Special Autonomic City, were selected to analyze and define the status of the walkways and the street spaces. Satellite imagery and numerical maps were used to collect geographic data. Practical and actual surveys for the selected sites were performed to analyze the street status and the pedestrian status. Based on the all collected data, analysis results, and literature reviews, the questionnaire was made, and 315 inquiries qualified for analysis. The physical status of all four study sites was the highest level, Grade A, and green open spaces were relatively sufficient. As a result, the factors obtained from the factor analysis have an impact on the satisfaction of the pedestrian streets in the commercial area. The factors are as followed Design > Convenience > Roadside trees and rest areas > Safety > Safety protective facilities > Transportation and information facilities > Continuity > Basic state of road surfaces > Comfortability, and in the residential area: Transportation and information facilities > Basic state of road surfaces > Comfort > Convenience > Continuity > Design > Illumination and crime prevention facilities > Safety > Roadside trees and rest areas.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.657-665
• /
• 2015

This study evaluated the thermoregulatory properties of functional thermal underwear ('heating underwear') in markets using a thermal manikin and human wear trials. One ordinary thermal underwear (ORD) and two functional thermal underwear (HEAT1 and HEAT2; manufactured goods, HEAT1: moisture absorbing heat release mechanism, HEAT2: heat storage, release mechanism) were chosen. Thermo-physiological and subjective responses were evaluated at an air temperature of $5.0{\pm}0.5^{\circ}C$ and air humidity of $30{\pm}5%RH$ with five male subjects ($21.6{\pm}1.3yr$ in age, $178.0{\pm}5.9cm$ in height, $68.2{\pm}5.9kg$ in body mass). Experimental conditions consisted of four ensembles that included winter clothes (Control: no underwear, ORD, HEAT1, HEAT2). Water-vapor resistance was greater in fabric of HEAT1 than others. The results were: 1) Total thermal insulation (IT) using a thermal manikin were not greater for HEAT1 (0.860clo) and HEAT 2 (0.873clo) than for ORD (0.886clo). 2) There were no significant differences in rectal temperature, mean skin temperature, heart rate and total body mass loss between the four conditions. Microclimate clothing temperature on the back was greater for ORD than for HEAT1 and HEAT2. Subjects felt more comfortable with HEAT1 than for others at rest. HEAT2 was higher in microclimate humidity when compared to other conditions. The results suggest that thermoregulatory properties of 'heating underwear' in market did not differ from those of ordinary thermal underwear in terms of total thermal insulation and thermoregulatory responses in a cold environment.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.19-26
• /
• 2015

Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.268-280
• /
• 1994

Tissue conditioners have been used for treatment of denture stomatitis caused by wearing of dentures. Early studies pointed out Candide albicans (C. albicans) as main etiologic factor, and antifugal agents were added for control of the species. But there is a little information about broad comparison on the effect of tissue conditioners and antifungal agents added. The purpose of the present study was to compare the inhibiting effect of four tissue conditioners and one temporary soft liner on the growth of C. albicans for treatment of denture stomatitis using gel diffusion method by measuring diameter of the zone of growth inhibition. Three antifungal agents were added to each material for evaluation of the effect of added agents. Finally, observation was made to evaluate the effect of the loss of antifungal elements by aging of the specimen. The results of this study were obtained as follows : 1. Tempo had remarkable antifungal effect showing the zone of growth inhibition as 2.35 mm at 1st day, and was most effective on End: 4th and 7th day from incubation (p<0.05). But Coecomfort, Dura conditioner, Visco-gel, Coe-soft had little antifungal effect from the 1st day of incubation. 2. Nystatin was most effective showing 9.60-12.04 mm of zone of inhibition at the 1st day from incubation. The antifungal properties were reduced to amphotericin B, chlorhexidine and materials without agent (p<0.05), and the effect was diminished by time. 3. As pretreatment with amphotericin B, nystatin, chlorhexidine, Tempo was very effective at the 1st day from incubation showing zone of inhibition as 3.65, 12.04, 4.78 mm with addition of each agent. Dura conditioner had strongest antifungal effect at the next day as 2.86, 5.33, 1.29 mm of zone of inhibition, and yielding results of Coe-comfort, Tempo, Coe-soft was shown at 4th and 7th day from incubation (p<0.05). Taken all together, tissue conditioners have little antifungal effect except Tempo. Formation of the zone of growth inhibition was due to agents amphotericin B, nystatin, chlorhexidine and nystatin was most effective. Conclusively, it is advisable to select material which is effective on the growth of C. albican and consider addition of antifungal agents for treatment of denture stomatitis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.557-567
• /
• 2015

The most decisive factor of major sources of a helicopter is the main rotor system and the rotor-induced vibration is one of the technical challenges which should be resolved to ensure comfort for crews and passengers. Passive vibration reduction devices are adopted in conventional helicopters and several types of passive devices are also used in Surion. In recent years, foreign helicopter manufactures have increasingly applied the application of AVCS (active vibration control system) because of their superior performance with lower weight compared to passive device. In addition to weight reduction, AVCS has advantages maintaining its performance over aircraft configuration changes and flight condition changes. The technology demonstration program was performed in order to validate the performance of AVCS when applied to Surion, and optimization process for finding optimal configuration of sensors and actuators. Optimal configuration was produced using ground and flight test data, and its performance was evaluated and compared with flight test result.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.43-51
• /
• 2006

Purpose: To resolution of A hospital-handmade modification double tilt angle immobilization system (DTAB immobilization system) and to report the clinical results of it. Material and Methods: It was developed in conjunction with the breast board for patients unable to achieve and maintain the desired uncomfortable respiration and position of set-up needed in the treatment of RT (This custom design provides an alternative to accomplishing this desired head angle needed to relax position treatment area, realizing that the lenses totally protected eye-ball out) By using the angled breast board and SBDD(small bowel device), reproducibility of set-up and patient comfort were addressed throughout the simulation, computed tomography planning and treatment process. Results: Usually patients the error range-within 5 mm. When use of Aqua patients error range-within 3 mm. Conclusion: It was constructed in tandem with a unique custom-built double tilt angle board (DTAB). It was designed to eliminate clinical set-up problems with head immobilization and instability during treatment, thus providing for a more comfortable head rest for the patient.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.27-33
• /
• 2022

Sleep is an essential factor for living a healthy life, but most modern people complain of poor sleep. For these people, as the need for a means to simply evaluate and manage the quality of sleep increases, devices that can check the sleep state at home without monitoring by an examiner are being developed. The smart sleep mask, which is the subject of this usability test, provides bio-signal monitoring while sleeping so that you can conveniently measure and manage your sleep state for yourself. The purpose of this study is to evaluate the usability and safety of the smart sleep mask, to find and prevent potential factors related to errors in use that may occur, and to develop the comfort and safety of this product. As a result of the formative evaluation of the sleep mask prototype, it was reported that it was difficult to turn on the power and check the results, and that the sleep mask was not comfortable to wear. Different opinions were presented on the size and weight of the sleeping mask by people in different age groups.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2022

Background: No studies have reported on the effects of loess beddings on insomnia patients. Purpose: It studied the change in quality of life and quality of sleep after having 15 insomnia subjects use the bedding that emits far-infrared rays. Methods: After using loess bedding for the test group and general yellow bedding for the control group, the study was conducted in the form of a questionnaire on the WHO quality of life of the subjects. Results: In the overall quality of life evaluation, the pre-and post-changes significantly improved in the test group. Using loess bedding was greatly enhanced the physical change, the actual sleep time, and the quality of sleep of the test group. The period of sleep was significantly longer post-treating, and the habitual sleep efficiency was considerably higher, and sleep disturbance was significantly lower than before in the test group. Sleep drug use and daytime dysfunction after treating in the test group significantly improved the sleep effect. Changes in the Sociality Scale, Environmental Change Scale, and Quality of Life Scale significantly improved in the test group. The quality of life for 14 items in the test group was significantly correlated. Daytime drowsiness, depression, and anxiety scale changes were significantly improved in the test group. According to the predictive survey, the subjects felt warmth in their body and comfort in mind during and after using loess bedding and evaluated that sleep quality was good. Conclusions: The overall quality of life in the test group increased using loess bedding.

• The Research Journal of the Costume Culture
• /
• v.7 no.6
• /
• pp.140-158
• /
• 1999

The purposes of this study are to examine the characters of the lower body shape in the middle aged women and to make slacks pattern on the base of four difference body shapes. The lower body shapes were classified into 4 types on the basis of their lateral view silhouettes. The slacks patterns were based on the lower body shape characters and resulted in followings. In “Type 1” of the right body shape with the standard protrusion of abdomen and hips, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4+0.5㎝+0.5㎝+fold(2.5㎝) and the back waist girth W/4+0.5㎝-0.5㎝+dart(3.5㎝). The front hip girth was defined as H/4+2.0㎝+0.5㎝ and the back hip girth as H/4+2.0㎝-0.5㎝ due to its increased ease amount produced by abdominal fat deposition. In the experimental pattern of “Type 2” with prominent hips, the front and back differences of the waist girth and the hip girth and the hip girth were defined as 1.0㎝ and 2.0㎝ separately. Accordingly, the front waist girth was W/4+0.5㎝+1.0㎝+fold(2.0㎝), the back waist girth W/4+0.5㎝-0.1㎝+dart(6.5㎝), the front hip girth H/4+2.0㎝+1.0㎝ and the back hip girth H/4+2.0㎝-1.0㎝. In “Type 3” with the prominent abdomen and the flat hips, the front waist girth was set up as W/4+0.5㎝+0.5㎝+fold(4.5㎝) for the increased front fold amount and the back waist girth was W/4+0.5㎝+0.5㎝+dart(3.0㎝). The front hip girth was made as H/4+2.5㎝+0.5㎝ and the back hip girth H/4+2.5㎝-0.5㎝. In “Type 4” with prominent abdomen and hips, considered were ① the increased front fold amount due to the abdominal protrusion, ② the increased back dart amount and the decreased back dart length owing to the hips prominent and ③ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5㎝+2.0㎝+fold(5.0㎝), the back waist girth as W/4+0.5㎝-2.0㎝+dart(4.0㎝), the front hip girth as H/4+2.0㎝+1.0㎝ and the back hip girth as H/4+2.0㎝-1.0㎝. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.