• Structural Engineering and Mechanics
• /
• v.20 no.3
• /
• pp.265-277
• /
• 2005

This paper is focused on fractal analysis of the surface cracking, a new tool for safety evaluation of corroded reinforced concrete (RC) beams. Comprehensive experimental investigations, including flexural tests, coupon tests on strength evaluation of corroded concrete and rusty rebar, and pullout tests to determine bond strength between concrete and rebar were carried out on nine Corroded Reinforced Concrete Beams (CRCB) exposed to an aggressive environment for more than 10 years. In combination with test results from a previous study on CRCBs fabricated in the laboratory from accelerated methods, it is found that, for both types of beams, the surface cracking distributions are fractal in character at loading and failure stages. Fractal dimension is calculated for all specimens at different corrosion states based on fractal analysis method. Relationships between the fractal dimension and mechanical properties of corroded concrete, rebar corrosion ratio, and ductility of CRCBs are discussed in detail. It is concluded that the fractal dimension can act as a damage index and can be efficiently used to describe the corrosion state of CRCBs.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.2
• /
• pp.185-191
• /
• 2013

This paper presents a new method for roller design of IRB(isolation roller bearing) seismic isolation device using experimental evaluation. Three layered plate is adopted for the IRB in which the upper plate is placed on x direction and the lower plate is placed on y direction. The rollers placed in each plate make a plate movement. The roller is then optimally designed using variable geometric conditions. Stress distribution depends on the diameter and length of the roller and hence this is used for the determination of optimal geometry of the roller. In the experimental evaluation, it is observed that stress concentration at the end sides of roller is decreased and geometric coefficients depend on crowning dimension. In addition, in order to determine optimal design parameters of the roller the plastic deformation and friction are experimentally identified.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.21-30
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the phase space-frequency domain. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objectives in this study are features of time domain and frequency domain. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These differences in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimension. Proposed phase space-frequency domain method in this study can integrity evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.108-118
• /
• 1998

This study proposes th analysis and evaluation method of time series ultrasonic signal using the chaos feature extraction for ultrasonic pattern recognition. Features extracted from time series data using the chaos time series signal analyze quantitatively weld defects. For this purpose, analysis objective in this study is fractal dimension and Lyapunov exponent. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaosity resulting from distance shifts such as 0.5 and 1.0 skip distance. Such differences in chaosity enables the evaluation of unique features of defects in the weld zone. In quantitative chaos feature extraction, feature values of 4.511 and 0.091 in the case of side hole and 4.539 and 0.115 in the case of vertical hole were proposed on the basis of fractal dimension and Lyapunov exponent. Proposed chaos feature extraction in this study can enhances ultrasonic pattern recognition results from defect signals of weld zone such as side hole and vertical hole.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.152-165
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaoral post-process system for precision rate enhancement of ultrasonic pattern recognition. Chaos features extracted from time series data for analysis quantitatively weld defects For this purpose, feature extraction objectives in this study are fractal dimension, Lyapunov exponent, shape of strange attrator. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shifts such as nearby 0.5, 1.0 skip distance. Such difference in chaoticity enables the evaluation of unique features of defects in the weld zone. In quantitative chaos fenture extraction, feature values of 0.835 and 0.823 in the case of slag inclusion and 0.609 and 0.573 in the case of crack were suggested on the basis of fractal dimension and Lyapunov exponent. Proposed chaoral post-process system in this study can enhances precision rate of ultrasonic pattern recognition results from defect signals of weld zone, such as slag inclusion and crack.

• Journal of Nutrition and Health
• /
• v.35 no.6
• /
• pp.668-680
• /
• 2002

The purpose of this study was to investigation the importance and categorization of task elements of school food service dietician and to provide the useful data for standard model of the dietician′s tasks of school foodservice. This study was conducted in school food services nationwide in method of written questionnaire. The questionnaires were mailed to the dieticians of 3 type school foodservice system-conventional, commissary, joint management. Of the 660 schools that participated in this study, the responses from 212 conventional system and 212 commissary system and 200 joint management system were selected for analysis. Statistical analysis was performed with SAS/Win 6.12 package program for descriptive analysis, T-test, ANOVA, factor analysis using. The main results of this study can be summarized as follows Importance level was more than 4 score out of 5 scale in most of the task elements. The result was indicative of the appropriateness of definition of the 61 task elements. Of 61 task elements, importance level on ′nutrition education′ and on ′evaluation of foodservice operation management′ indicated the most significant difference between present and ideal situation. Through factor analysis, 61 task elements were regrouped into 7 dimensions; "Duty dimension of cooking and distribution management", "Duty dimension of cost management", "Duty dimension of raw material management", "Duty dimension of education management", "Duty dimension of menu management", "Duty dimension of record keeping of foodservice", "Duty dimension of general management (others)".

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.03a
• /
• pp.39-44
• /
• 1999

The purpose of this study was to extract emotional dimensions from Korean adjectives relating to apartment noise. Noise-related 296 Korean adjectives were extracted from a dictionary and three evaluators selected 96 adjectives from those by removing very similar ones in meaning. Two types of 96 7-point scales were conducted to college students for evaluation, whether each adjective describes apartment noise appropriately. From this evaluation, 28 adjectives having above 4.5 points were selected. Again, 8 different types of 7-point scales on 378 adjective pairs(28 x 27/2) were administrated to separate college students to evaluate the degree of similarity between 28 adjectives. Based upon this evaluation, 14 adjectives were finally selected and scores on similarity sere analyzed through two different statistical analyses (Multi-dimensional scale and Cluster analysis). The results showed that three dimensions (displeasure, sensitivity and perceived loudness) exist in peoples' emotional response state to apartment noise. The previous studies have treated annoyance and sensitivity as separate measures to noise. However, this study showed that these two factors were on the same emotional dimension labeled as 'sensitivity' In addition, new dimension, labeled as 'displeasure', was found.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.22-28
• /
• 2003

This study proposes the construction of chaos simulator for cutting characteristics evaluation of non-ferrous metals. Also this paper aims to find the optimal cutting conditions of diamond turning machine by measuring surface form and roughness to perform the cutting experiment of non-ferrous metals, which are aluminum, with diamond tool. As well, according to change cutting conditions such as fled rate, using diamond turning machine to perform cutting processing, by measuring cutting force and surface roughness and according to cutting conditions the aluminum about cutting properties. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics. Constructed chaos simulator in this study can be used for cutting characteristics evaluation of non-ferrous metals.

• Journal of Chest Surgery
• /
• v.27 no.8
• /
• pp.656-663
• /
• 1994

Evaluation of heart function is of importance in assessing the results of valvular heart surgery. Information on volume and functional change of heart chamber can be obtained by cardiac catheterization and echocardiography. We studied 41 patients with mitral stenosis[MS] and 23 patients with mitral regurgitation[MR] using M-mode echocardiography before and after mitral valve replacement[MVR] at Pusan Paik Hospital. Preoperative cardiac catheterization was available in 56 cases, and the results were obtained as follows. 1. In patients with MS, preoperative average LV end-diastolic dimension[EDD] and end-systolic dimension[ESD] were remained within normal range, but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative and postoperative LV ejection fraction[EF] were remained within the normal range and no significant change[P>0.05]. The preoperative left atrial dimension[LAD] was enlarged considerably above normal[P<0.01], but was significantly decreased after surgery[P<0.001]. The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05]. 2. In patients with MR, preoperative average end-diastolic dimension[EDD] and end-systolic dimension[ESD] were significantly greater than normal[P<005], but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative LV ejection fraction[EF] and fractional shortening[FS] were within normal range, and no significant change after surgery[P>0.05].The preoperative left atrial dimension[LAD] was enlarged considerably above normal [P<0.01], but was significantly decreased after surgery[P<0.001].The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05].

• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.303-315
• /
• 2017

Yoo (2015, Statistics and Probability Letters, 99, 109-113) derives theoretical results in an optimal sufficient dimension reduction with singular inner-product matrix. The results are promising, but Yoo (2015) only presents one simulation study. So, an evaluation of its practical usefulness is necessary based on numerical studies. This paper studies the asymptotic behaviors of Yoo (2015) through various simulation models and presents a real data example that focuses on ordinary least squares. Intensive numerical studies show that the $x^2$ test by Yoo (2015) outperforms the existing optimal sufficient dimension reduction method. The basis estimation by the former can be theoretically sub-optimal; however, there are no notable differences from that by the latter. This investigation confirms the practical usefulness of Yoo (2015).