• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2017

Introduction of robustness index in the structure is done in three ways: deterministic robustness index, probabilistic robustness index, and risk-based robustness index. In past decades, there have been numerous researches to evaluate robustness index in both deterministic and probabilistic ways. In this research, by using a risk analysis, a risk-based robustness index has been defined for the structure. By creating scenarios in accordance with uncertainty parameters of critical and unexpected gas blast accident, a new method has been suggested for evaluating risk-based robustness index. Finally, a numerical example for the evaluation of risk-based robustness index of a four-storey reinforced concrete moment frame, designed and built based on Eurocode 8 code, has been presented with results showing a lower risk of robustness.

• KCID journal
• /
• v.13 no.1
• /
• pp.72-81
• /
• 2006

The objictive of this study is to analyze regional drought using agricultural drought indicator. Toforecast and evaluate the drought, the drought indices for agriculture were applied. In the present drought preparedness plans of Ministry of Agriculture and Forestry (MAF), it is prescribed that the preparedness levels should be classified by considering the precipitation, reservoir storage, soil moisture in paddy and upland, and the growing status of crops. There are many drought index to analyze and evaluate the drought. However, these indices do not exactly explain all drought events. Thus, we select 4 drought indices to evaluate agricultural drought:reservoir storage index, 3-month delayed SPI, mean rainfall index, and dry day index. Using these ineices, six drought stages are classified. The results show that agricultural drought could be apprppriately analyzed and evaluated by agricultural drought stage and four drought indices.

• Journal of Korean Society for Quality Management
• /
• v.24 no.4
• /
• pp.90-102
• /
• 1996

Process incapability index which is intended to evaluate the process capability by measuring process incapability provides more detailed information by dividing information about the process mean and variance. But when the target value is not consistent with the center of specification, it is very difficult to evaluate the process capability accurately. Thus it is necessary to improve the existing process incapability index. The improved process incapability index can identify the variation of the process faster than other process capability indices when applied firstly, to the precision process which can be affected sensitively by the change of the process, secondly, to the ordinary process where cost difference from the change of process is noticeable. By using subindices such as inaccuracy index and imprecision index, it is easier for quality manager to find where the cause of the variation of process is, and to take necessary action in advance.

• International Journal of Knowledge Content Development & Technology
• /
• v.9 no.2
• /
• pp.65-89
• /
• 2019

This study has the aim of developing an evaluation index that can help evaluate the reliability of the information resources of institutions retaining humanities assets for the purposes of laying out the foundation for providing one-stop portal service for humanities assets. To this end, the evaluation index was derived through the analysis of previous research, case studies, and interviews with experts, the derived evaluation index was then applied to the humanities assets retaining institutions to verify the utility. The institutional information resources' reliability evaluation index consisted of the two dimensions of the institutions' own reliability evaluation index. The institution provided a service and system evaluation index. The institutions' own reliability evaluation index consisted of 25 points for institutional authority, 25 points for data collection and construction, 30 points for data provision, and 20 points for appropriateness of data, for a total of 100 points, respectively. The institution provided service and system evaluation indexes consisting of 25 points for information quality, 15 points for appropriateness (decency), 15 points for accessibility, 20 points for tangibility, 15 points for form, and 10 points for cooperation, for the total of 100 points, respectively. The derived evaluation index was used to evaluate the utility of 6 institutions representing humanities assets through application. Consequently, the reliability of the information resources retained by the Research Information Service System (RISS) of the Korea Education & Research Information Service (KERIS) turned out to be the highest.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.18
• /
• pp.71-80
• /
• 1988

Process capability implies the qualitative capability of a process, and it is necessary to specify the process capability by quantification and to evaluate the level with the specified standardizaion. But the process capability index is currently used to evaluate the performance of quality control activity. without considering the characteristics of process structure or the economy of management. Here the researcher would like to redefine process capability and emphasize its index may be used as the measure of managerial assessment and the objective of process quality control in full consideration of the economic aspects of process characteristics. Too little or too much process capability causes a loss of or excess. The proper economic level of process capability varies to each process. The procedure of taking the optimum process capability index is derived from the expected profit function, whereas each method is studied in cases of normal process with one-sided specification and two-sided specification. In addition, the process capability index is presented as a method of quality assurance. And an example is exhibited on wrapping process of 'A' company. The results of this study are summarized at follows. First, though the norminalization of the process capability index is possible by the existing methods, the optimum process capability index can vary to the situation of each process. So, the optimum process capability index which is suggested in this dissertation should be used as the standard to assess process capability. Second, the process capability index can take its effect not just in indicating quality control or managerial records but also in the management of high qualify assurance.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.37-51
• /
• 2000

Identification of damage location based on modal measurement is an important problem in structural health monitoring. The damage index method that attempts to evaluate the changes in modal strain energy distribution has been found to be effective under certain circumstances. In this paper two damage index methods using bending strain energy and shear strain energy have been evaluated for numerous cases at different locations and degrees of damage. The objective is to evaluate the feasibility of the damage index method to localize the damage on large span concrete bridge. Finite element models were used as the test structures. Finally this method was used to predict the damage location in an actual structure, using the results of a modal survey from a large concrete bridge.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.151-158
• /
• 2008

To evaluate aortic wall stiffness without influence of different background blood pressure, a new technique was developed and verified. At eight swine descending aortae, volume-pressure measurement was performed using custom-made system. Based on averaged pressure-volume curve, aortic distensibility index was formulated to evaluate aortic wall stiffness regardless of variable blood pressure and aortic size. The variability of aortic distensibility index by pressure change was compared with other parameters for wall stiffness evaluation. Subsequently, the aortic distensibility index was calculated at 100 contrast-enhanced EBCT data sets of normal volunteers in regular health screening program. The measured aortic distensibility index was compared with age, coronary calcium score, and aortic calcium score. Between 50 and 360 mmHg of blood pressure, the coefficient of variance of aortic distensibility index was 22.00% as comparing with 88.99% of classical compliance. Based on age, aortic distensibility index showed correlation coefficient of 0.55, whereas classical compliance showed 0.26. The correlation coefficient with modified aortic calcification was 0.43. Linear regression study revealed statistical significance of correlation coefficients. The aortic distensibility index, the method to evaluate aortic wall stiffness free from variable blood pressure and aortic size, was developed and verified with significant practical feasibility.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.201-207
• /
• 2007

As the power industry moves towards open competition, there has been a need for methodology to evaluate distribution power system reliability by using customer interruption costs, particularly in power supply zones under the competitive electricity market. This paper presents an algorithm to evaluate system average interruption duration index, expected energy not supplied, and system outage cost taking into consideration failure rate of the distribution facility and industrial customer interruption cost. Also, to apply this algorithm to evaluate system outage cost presented in this paper, the distribution arrangement of a dual supply system consisting of mostly high voltage customers in an industrial complex in Korea is used as a sample case study. Finally, evaluation results of system interruption cost, system average interruption duration index, and expected energy not supplied in the sample industrial complex area are shown in detail.

• Journal of Acupuncture Research
• /
• v.30 no.3
• /
• pp.27-38
• /
• 2013

Objectives : This study was designed to evaluate patient satisfaction of Korean medicine therapy using treatment tool by psychological type. Methods : 48 subjects were participated in this study. Before a treatment, we analyzed a patient's phychological type first by using a questionnaire. And then we divided 3 groups which were called a rational sympathy module group, emotional sympathy module group, control group. Manner of medical consultation according to patient's phychological type was carried out in all groups. After all treatment, we conducted a survey about medical service perception index, patient happiness index, medical satisfaction index. To evaluate a satisfaction degree, we analyzed results of survey statistically. Results : The results of the analysis, both rational sympathy module group and emotional sympathy module group got a higher score than control group statistical significantly on medical service perception index. Emotional sympathy module group got a higher score than control group statistical significantly on patient happiness index and medical satisfaction index. But rational sympathy module group only had a higher tendency than control group on patient happiness index and medical satisfaction index. Emotional sympathy module group got a higher score than rational sympathy module group on medical service perception index, patient happiness index and medical satisfaction index. Conclusions : Korean medicine therapy using treatment tool by psychological type consisted of patient's phychological type questionnaire and manner of medical consultation could improve a patient's satisfaction. It was more effective in emotional sympathy module group than rational sympathy module group.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.419-428
• /
• 1998

In this paper, we analyzed two methodologies to evaluate the total quality management activities comparatively. One of them is the traditional scoring system (TSS) by analytic hierarchy process (AHP) and the other is the efficiency measuring system (EMS) by data envelop analysis (DEA), It is demonstrated that the index by TSS and the efficiency index by EMS are not correlated. Also, the efficiency index by EMS in terms of company characteristics such as the size of company and ISO certifications is different from the index by TSS. The result implies that to evaluate the quality activities by EMS is needed as a supplementory methodology.