• Macromolecular Research
• /
• 제16권7호
• /
• pp.637-643
• /
• 2008

A combination of magnetic and temperature-responsive properties in the same polymer composites is expected to increase their potential applications in the biomedical field. Accordingly, micron-sized magnetite/polystyrene/poly(2-dimethylaminoethyl methacrylate-ethyleneglycol dimethacrylate), which are abbreviated as $Fe_3O_4$/PS/P (DM-EGDM) composite polymer particles, were prepared by the seeded copolymerization of DM and EGDM in the presence of magnetite/polystyrene ($Fe_3O_4$/PS) particles. $Fe_3O_4$/PS/P(DM-EGDM) composite particles with magnetic properties showed a temperature-sensitive phase transition at approximately $31^{\circ}C$. The adsorption behavior of the low molecular weight emulsifiers and trypsin (TR) as biomolecules were examined on $Fe_3O_4$/PS/P(DM-EGDM) composite polymer particles at different temperatures. The native conformation of TR was followed by measuring the specific activity under various adsorption conditions. The activity of the adsorbed TR on composite polymer particles was higher than those of the tree TR and TR adsorbed on $Fe_3O_4$/PS particles.

• Microbiology and Biotechnology Letters
• /
• 제20권3호
• /
• pp.257-262
• /
• 1992

Virginiae butanolide (VB) is an autoregulator which triggers virginiamycin production in Strefltomyces virginiae. VB-C binding protein activity was investigated under various additives. The VB-C binding protein was almost fully observed in sotubte fraction (>90%) and the binding activity was optimum at pH 7.0. The VB-C binding activity was increased about 15% in 0.5 M KCI, whereas decreased about 60% in 20 mM $Mo^{6+}$. Chelating reagents (ethylenediarnine tetraacetic acid, ethyleneglycol bis(2-aminoethylether) tetraacetic acid, 8-hydroxyquinoline) and SH protecting reagents (rnercaptoethanol, dithiothreitol, thioglycerol) inhibited the VB-C binding activity about 30~55% and 3~20%, respectively. Serine protease inhibitor (phenyl methane sulfonyl fluoride), nucleotides (guanosine 5'-monophosphate, adenosine 3',5'-cyclic monophosphate), and phosphatases (alkaline, acid phosphatase) increased the VB-C binding activity about 17%, 6~20%, and 4- 13%, respectively.

• Journal of Environmental Science International
• /
• 제19권1호
• /
• pp.97-103
• /
• 2010

The biodegradable oil absorption resin was prepared by the suspension polymerization of the modified starch and 2-ethylhexyl acrylate (2-EHA). The highest oil-absorption capacity of B-PEHA prepared showed at the condition of the modified starch content of 10 g and ethyleneglycol dimethacrylate (EGDMA) of 0.133 wt%. Its maximum oil absorption capacity per g of oil absorber was chloroform 30.88 g, toluene 19.75 g, xylene 18.78 g, tetrahydofuran (THF) 15.96 g, octane 11.43 g, hexane 9.5 g diesel oil 12.80 g, and kerosene 13.79 g, respectively. The biodegradation of poly-2-ethylhexylacrylate (B-PEHA) determined by enzymatic hydrolysis showed approximately 17~20%. The results showed that the preparation of the biodegradable oil absorption resin is available using the modified starch.

• KSBB Journal
• /
• 제5권2호
• /
• pp.119-124
• /
• 1990

Phospholipase D catalyzes the phosphatidohydrolysis and transphosphatidylation of phospholipid in the biological systems. In this study we were partially purified phospholipase D from Chinese cabbage and the characterization of the enzyme was carried out in a multistirring batch system bioreactor. The enzyme showed optimum activity at pH ,5.6, highest activity at 37$^{\circ}C$ and Ca2+ is important for the enzyme activity. Optimum concentrations of Ca2+ for phosphatidohydrolysis was 20 mM and for transphosphatidylation was 40 mM, respectively. Some organic solvents such as diethylether, isopropylether and butylacetate were activated the enzyme activity. On the other hand, EDTA, Ba2+, Mn2+ and Zn2+ showed inhibitory effect on the enzyme activity. The base acceptors in transphosphatidylation by the Chinese cabbage phospholipase D were tested. Various poly-and monohydroxy alcohols were found to be active.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.289-296
• /
• 2004

The kinetic parameters, including the activation energy E, the reaction order n, and the pre-exponential factor Z, of the degradation of the copolymers based on the poly(L-lactide) (PLLA) or poly(p-dioxanone-co-L-lactide) (PDO/PLLA) and diol-terminated poly(ethylene glycol) (PEG) segments have been evaluated by the single heating methods of Friedman and Freeman-Carroll. The experimental results showed that copolymers exhibited two degradation steps under nitrogen that can be ascribed to PLLA or PDO/PLLA and PEG segments, respectively. However, copolymers exhibited almost single degradation step in air. Although the values of initial decomposition temperature were scattered, copolymers showed the lower maximum weight loss rate and degradation-activation energy in air than in nitrogen whereas the higher value of temperature at the maximum rate of weight loss was observed in air.

• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.1-6
• /
• 2002

The mucoadhesive characteristics of [P(AA-co-PEGMM)] films by estimating the glass transition temperature $(T_g)$, analyzing surface energy and studying FT-IR was previously reported. In this study, the possibility of buccal mucoadhesive dosage form of [P(AA-co-PEGMM)] films by mucoadhesive force measurements and dissolution tests were also investigated. Mucoadhesiveness of [P(AA-co-PEGMM)] films was compared with cr-PAA and cr-PEGMM films crosslinked with 3% ethyleneglycol dimethacrylate (EGDMA). The buccal mucoadhesive force of [P(AA-co-PEGMM)] films increased with increasing content of PEGMM. [P{AA-co-PEGMM (18 mole%)}] films showed a significantly greater mucoadhesiveness than cr-PAA and cr-PEGMM films. The mucoadhesive force measured in normal saline (pH 5.0) was higher than that measured in phosphate buffer (pH 6.8) because of the pH dependence of hydrogels with carboxyl ions within the PAA. Moreover, the mucoadhesive force of [P{AA-co-PEGMM (18 mole%)}] films was at maximum after 2 hr attachment of buccal mocosa and it was maintained over $1\;N/cm^2$ for up to 10 hr. In dissolution studies, the release of butorphanol tartrate from [P(AA-co-PEGMM)] films increased with increasing PEGMM content, and films prepared with 18 mole% PEGMM gave almost zero order release kinetics.

• Korean Journal of Animal Reproduction
• /
• 제16권4호
• /
• pp.317-323
• /
• 1993

This study was carried out to study effects of the addition level of acetamide and non-permeable cryoprotectants(Ficoll, sucrose) in VS(20% glycerol＋10% ethyleneglycol) and equilibration time on the survival of vitrified mouse morulae. The results are summarized as follows: 1. When 10, 15 and 20% of acetamide were added to the new vitrification solution(20G 10E), FDA-scores of embryos were 4.4(control), 4.4(10%), 3.6(15, 20%), respectively. The addition of acetamide did not affect the survival of forzen-thawed morulae(P<0.05). 2. The survival rate betwen 5 min(3.5) and 10 min(4.6), 10 min(4.6) and 20 min(3.2) of equilibration in 10% sucrose, and 20 min(3.2) and 5 min(4.0), or 10 min(4.3) in 20% sucrose were significantly different(P<0.05). The highest survival(4.6) rate was obtained in mouse morulae equilibrated in VS(20G 10E) containing 10% sucrose for 10 minutes. 3. FDA-score of morulae frozen in the new vitrification solution containing 0, 10, 20 and 30% Ficoll was 4.5, 4.2, 4.4 and 4.6, respectively and had no significant effect among concentrations of Ficoll(P>0.05). The development rate after culture(24h) was 89%(20% Ficoll) and 93%(30% Ficoll), respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제37권10호
• /
• pp.887-894
• /
• 2013

Effective thermal conductivity of nanofluids has been predicted by using generalized self-consistent model and modified Eshelby model, which have been used for analysis of material properties of composites. A nanolayer between base fluid and nanoparticle, one of key factors for abrupt enhancement of thermal conductivity of nanofluids, is included in the analysis. The effective thermal conductivities of the nanofluid predicted by the present study show good agreement with those by models in the literature for the nanolayer with a constant or linear thermal conductivity. The predicted results by the present approach have been confirmed to be consistent with experiments for representative nanofluids such as base fluids of water or ethyleneglycol and nanoparticles of $Al_2O_3$ or CuO to be validated.

• Journal of Microbiology and Biotechnology
• /
• 제20권8호
• /
• pp.1230-1239
• /
• 2010

Five bacterial species, capable of degrading the recalcitrant organic compounds (ROCs) diethyleneglycol monomethylether (DGMME), 1-amino-2-propanol (APOL), 1-methyl-2-pyrrolidinone (NMP), diethyleneglycol monoethylether (DGMEE), tetraethyleneglycol (TEG), and tetrahydrothiophene 1,1-dioxide (sulfolane), were isolated from an enrichment culture. Cupriavidus sp. catabolized $93.5{\pm}1.7$ mg/l of TEG, $99.3{\pm}1.2$ mg/l of DGMME, $96.1{\pm}1.6$ mg/l of APOL, and $99.5{\pm}0.5$ mg/l of NMP in 3 days. Acineobacter sp. catabolized 100 mg/l of DGMME, $99.9{\pm}0.1$ mg/l of NMP, and 100 mg/l of DGMEE in 3 days. Pseudomonas sp.3 catabolized $95.7{\pm}1.2$ mg/l of APOL and $99.8{\pm}0.3$ mg/l of NMP. Paracoccus sp. catabolized $98.3{\pm}0.6$ mg/l of DGMME and $98.3{\pm}1.0$ mg/l of DGMEE in 3 days. A maximum $43{\pm}2.0$ mg/l of sulfolane was catabolized by Paracoccus sp. in 3 days. When a mixed culture composed of the five bacterial species was applied to real wastewater containing DGMME, APOL, NMP, DGMEE, or TEG, 92~99% of each individual ROC was catabolized within 3 days. However, at least 9 days were required for the complete mineralization of sulfolane. Bacterial community diversity, analyzed on the basis of the TGGE pattern of 16S rDNA extracted from viable cells, was found to be significantly reduced in a conventional bioreactor after 6 days of incubation. However, biodiversity was maintained after 12 days of incubation in an electrochemical bioreactor. In conclusion, the electrochemical reduction reaction enhanced the diversity of the bacterial community and actively catabolized sulfolane.

• Journal of the Korean Ceramic Society
• /
• 제41권4호
• /
• pp.302-312
• /
• 2004

This paper presents the experimental results on the properties of the cement mortar with polycarboxylate-type superplasticizers PCA) which were synthesized by different mole ratio of methoxypoly(ethyleneglycol)monomethacrylate (MPEGMAA) and methacrylic acid (MAA) and by different length of polyethyleneoxide (PEO). As the PEO chain was longer and mole ratio of [MPEGMAA]/[MAA] was lower, the fluidity of cement mortar was better. The setting time of mortar with PCA was retarded, and as PEO chain was shorter and [MPEGMAA]/[MAA] was lower, it was more retared. Espeacially, when the molecular weight of MPEGMAA was 475(repeat unit of ethylene oxide=l0), the degree of retardation was the highest of them. The surface tensions of PCA solutions were lower than that of water due to the effect of PEO chain, and also the pore size distribution of cement mortar was influenced by it. The pores in cement mortar with PCA at 28 days were macropores in the range of 7 to 370$\mu\textrm{m}$, and accordingly, the densities and compressive strengths of mortar were lower than those of OPC mortar.