• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1997.05a
• /
• pp.9-15
• /
• 1997

치밀 난구세포로 둘러싸인 소 난자를 $38^{circ}C$. 5% $CO_2$ 배양기에시 5% superovulated cow serum(SCS)이 첨가된 m-TCM 199 medium 으로 $20{\sim}22$ 시간 배양하였으며, 수정능이 획득된 정자와 체외수정하였다. 7일${\sim}$8일경의 수정란을 1.3M methyl cellosolve(MC), 1.1M diethylene glycol(DEG), 1.8M ethylene glycol(EG), 1.6M propylene glycol(PG) 및 1.1M 1,3-butylene glycol(BG) 용액에서 10분간 평형시킨 후 0.25 ml 스트로내에 장전하였다. 스트로를 $0^{\circ}C$의 alcohol bath freezer에 넣고 $-6^{\circ}C$까지 $-1^{\circ}C$/분 속도로 냉각, 식빙 후 10분간 정체시켰으며, $-0.3^{\circ}C$/분 또는 $-0.5^{\circ}C$/분으로 $-30^{\circ}C$까지 냉각 후 스트로를 액체질소에 침지하여 보관하였다. 수정란이 들어있는 스트로를 $30^{\circ}C$ 온수에서 융해하였으며, 수정란을 TCM 199 medium 으로 옮긴 후 5% SCS가 첨가된 TCM 199 medium 에서 48시간 배양하였다. 수정란이 양호한 형태를 유지하며 나중의 발육단계로 진행된 것을 생존한 것으로 간주하였다. 각 종류의 동해방지제에서 동결된 수정란의 일부는 융해 후 동해방지제를 제거하지 않고 직접 비외과적으로 이식하였다. 동결-융해 후 동해방지제의 종류에 따른 탈출배반포 발달율은 EG 50.0%, MC 53.6%, DEG 56.9%, PG 58.0% 그리고 BG 11.5%였다. $-0.3^{\circ}C$/분 또는 $-0.5^{\circ}C$/분 으로 냉각한 수정란의 생존율은 두 그룹간에 유의적인 차이가 없었으나 (P<0.05), 탈출배반포 발달율은 -0.5분 $^{\circ}C$/분(22.6%, 12/53)보다 $-0.3^{\circ}C$/분(64.6%, 31/48) 냉각시에 유의적으로 높았다(P<0.01). 동해방지제의 종류에 따른 수정란의 수태율은 MC 48%(10/21). DEG 30%(3/10), EG 74%(20/27) 및 PG 40%(4/10) 였다. 이러한 결과로 보아 MC, DEG, EG 그리고 PG는 소의 체외수정란의 동결을 위한 동해방지제로서 이용될 수 있음을 보여주었다.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1997.05a
• /
• pp.27-34
• /
• 1997

Bovine oocytes surrounded with compact cumulus cells were cultured for 20 to 22 hours($38^{\circ}C$, 5% $CO_2$) in modified TCM-199 medium supplemented with 5% superovulated cow serum(SCS) and inseminated by in vitro capacitated spermatozoa. Day 7 to 8 embryos were equilibrated for 10 minutes in 1.3M methyl cellosolve(MC) <1.1M diethylene glycol(DEG), 1.8M ethylene glycol(EG), 1.6M propylene glycol(PG) and 1.1 M 1,3-butylene glycol(BG) solutions. They were then loaded into 0.25ml straws, placed into an alcohol bath freezer at $0^{\circ}C$, cooled from $0^{\circ}C$ to $-6^{\circ}C$ at $-1^{\circ}C$/minute, seeded, held for 10 minutes, and stored in liquid nitrogen. After thawing in $30^{\circ}C$ water, the embryos wee rehydrated in TCM-199 medium and then cultured for 48 hours in TCM-199 plus 5% SCS. Embryos were considered viable if they progressed to later developmental stages with a good morphology. Some of the embryos frozen in each cryoprotectant were thawed and transferred non-surgically without removing the cryoprotectant. Hatched embryos survived freezing and one-step dilution as follows : EG(50.0%), MC(53.6%), DEG(56.9%), PG(58.0%) and BG(11.5%). The survival rate of embryos cooled at -0.3^{\circ}C$ vs. $-0.5^{\circ}C$/minute was not significantly different(P<0.05), however, blastocysts hatched most often (P<0.01) in vitro when cooled at a rate of $0.3^{\circ}C$/minute(64.6%), 31/48) than at $-0.5^{\circ}C$/minute(22.6%, 12/53). Pregnancy rates resulting from embryos frozen in the different cryoprotectants were as follows : MC(48%, 10/21); DEG(30%, 3/10); EG(74%, 20/27); and PG(40%, 4/10). These results indicate that MC, DEG, EG and PG have utility as cryoprotectants for the freezing and thawing of IVF Bovine embryos.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.205-215
• /
• 2017

Polymer membranes are cheap and easy in fabrication, and show a high permeability and selectivity, thus play pivotal roles in gas separation as well as water purification. However, polymer membranes typically exhibit the trade-off relation between permeability and selectivity; i.e. when the permeability is high, the selectivity is low and vice versa. Facilitated transport has been considered one of the solutions to address this issue. Over the last decades, facilitated transport concept had played an important role in preparing the membranes and providing ideal and various models for the transport. Understanding the nature of carrier, the mobility of matrix and the physico-chemical properties of polymer composites are crucial for facilitated transport. Depending on the mobility of carrier, facilitated transport membrane is classified into three; mobile carrier membrane, semi-mobile carrier membrane, fixed-site carrier membrane. Also, there are four types of reversible reaction between the carrier and the specific target; proton transfer reaction, nucleophilic addition reaction, p-complexation reaction and electrochemical reaction. The facilitated transport membranes have been applied in the separation of CO2, O2 and olefin (propylene or ethylene). In this review, major challenges surrounding facilitated transport membranes and the strategies to tackle these challenges are given in detail.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.298-304
• /
• 2006

Blends of poly (acrylic acid-co-maleic acid)(PAM) with poly (vinyl alcohol)(PVA) were obtained by solution blending. The blends were solvent-on to a film to examine thermo-mechanical properties and gas permeability. The transition temperatures $(T_g\;and\;T_m)$ of the blends remained constant regardless of PAM contents. However, the values of enthalpy changes corresponding to melting transition $({\Delta}H_m)$ and initial degradation temperature $({T_D}^i)$ were decreased with increasing PAM content. The values of ultimate strength and initial modulus gave the maximum value at the 12 wt% PAM then decreased with further increase of PAM content up to 15 wt%. To measure the gas permeability of the PVA/PAM blend films, the PVA blend solutions were coated onto both biaxially oriented propylene (BOPP) and poly (ethylene terephthalate)(PET) films. The oxygen transmission rate $(O_2\;TR)$ permeability values mono- tonically decreased with increasing PAM content. However, moisture vapor transmission rate was not affected by PAM content.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.52-59
• /
• 2006

This paper examined the conversion of methane to hydrogen and other higher hydrocarbons using dielectric barrier discharge with AC pulse power. Two metal electrodes of a coaxial-type plasma reactor were separated by gas gap and an alumina tube. The inner electrode was located inside the alumina tube. The alumina tube was located inside the stainless steel tube, which was used as the outer electrode. Effect of feed gas composition (methane, oxygen, argon, water and helium), flow rate, applied frequency, input volt-age on methane conversion and product distribution were studied. The major products of plasma chemical reactions were ethylene, ethane, propane, buthane, hydrogen, carbon monoxide and carbon dioxide. The increment of applied voltage and the usage of inert gas as the background (helium and argon) enhanced the selectivity of hydrocarbons and methane conversion. The addition of water in the feed stream enhanced the conversion of methane and yield of hydrogen. Higher voltage leads to higher yield of $C_2H_6,\;C_3H_8,\;C_4H_{10}$ and yield or $C_2H_2\;and\;C_2H_4$ appeared highly in lower voltage.

• KSBB Journal
• /
• v.24 no.6
• /
• pp.533-540
• /
• 2009

In this work, 5'-nitroindirubinoxime (5'-NIO) has been prepared as solid dispersions using a supercritical aerosol solvent extraction system (ASES) process in order to enhance its water solubility and dissolution rate. Solid dispersions of 5'-NIO and poly(vinyl pyrrolidone) (PVP) were prepared in various weight percent ratios. Three-component solid dispersions consisting of 5'-NIO, PVP, and poloxamer 188 (P188) were also prepared to study the influence of P188 level on their morphology, crystallinity, and dissolution behavior. All samples were prepared at $35^{\circ}C$ and 180 bar using supercritical carbon dioxide. The particle morphology and size of the two-component solid dispersions were found to be nearly spherical and much smaller (100-200 nm) compared with the original 5'-NIO. The morphology of three-component solid dispersions became more agglomerated as the level of P188 increased. The crystallinity of the original 5'-NIO was not observed in the solid dispersions prepared by the ASES process. Faster dissolution rates were observed for the three-componet solid dispersions because the arrangement of ethylene oxide and propylene oxide blocks of the poloxamer 188 enabled the formation of micelles in an aqueous phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.562-570
• /
• 2018

New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced interior automotive parts. A polymer with high foamibility (Ed note: Please check this.) and flowability would be more plausible. TPE composed of foam is a good polymer material to satisfy these trends. In this research, two different TPE were tested, focusing on foamibility and flowability. Two type of TPE were prepared. The first was blended Homo-PP, oil and SEBS. The second was Co-PP, oil and SEBS. The blending temperatures were $180^{\circ}C$, $190^{\circ}C$, and $260^{\circ}C$(second one). The blending speed was 50rpm and blending time was 5 min. The MI of the blended material was affected by the MI of PP and not affected by the blending temperature. The hardness and tensile elasticity were less affected by the MI of PP and blending temperature. The hardness and tensile elasticity were lower at a higher SEBS/Oil content ratio. The soft touch feel was higher with high SEBS/Oil contents. The IPN (Interpenentration polymer network) structure was observed by dissolving the SEBS/Oil layer in xylene. Strain-hardening phenomena also was observed. TPE behaves in a rubber and foamed closed-cell improved its stability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.328-335
• /
• 2009

This study was undertaken to investigate the influence of exposure and removal of four different cryoprotectants (CPAs) on the ATP content of cumulus cell-enclosed (COs) and cumulus cell-denuded (DOs) immature porcine oocytes. The in vitro nuclear maturation of the COs, exposed to and removed from the CPAs was also assessed. Both COs and DOs were exposed to 1.5 M concentrations of each CPA (ethylene glycol (EG); propylene glycol (PG); dimethyl-sulfoxide (DMSO); and glycerol (G)) for durations of 5, 15, and 30 minutes at room temperature ($23.5{\pm}1.5^{\circ}C$), and immersed in physiological saline supplemented with 20% (v/v) fetal bovine serum for 5 minutes ($39^{\circ}C$) to remove each CPA. Before, during and after exposure to each CPA, the ATP content of both the COs and the DOs was measured. After removal from each CPA an aliquot of the COs was matured for 44${\pm}$2 h, and their nuclear maturation rates were measured up to the metaphase stage of the second meiotic division (the M-II stage). The maturation rates up to the M-II stage were not significantly different between all the groups that were exposed to each CPA for 5 minutes. For 15 and 30 minute exposures, the maturation rates of the COs exposed to PG, DMSO and EG were almost the same as those of the control groups; however, the rates of G group exposed for 15 and 30 minutes were significantly lower (p<0.05) than the control group. These groups were also found to have a decrease in the ATP content of COs and DOs during and after exposure for the same periods (p<0.05). In addition, although the ATP contents of the COs after exposure to EG for any period were the same as the controls, the ATP content of the DOs exposed to EG for any period were significantly lower (p<0.05) than those of the controls. When the ATP content of the COs and DOs of each CPA were compared, the DOs exposed to PG were found to have a significantly greater level (p<0.05) than DOs exposed to G for any duration. In addition, the ATP content of DOs exposed to PG for 30 min and removal was also higher (p<0.05) than when exposed to DMSO for the same period. These findings indicate that PG may be a useful CPA for the cryopreservation of immature porcine oocytes.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.24-30
• /
• 2014

3-Amino-1,2,4-triazole (ATA) (2.5 and 5.0 phr) was incorporated into a immiscible maleated ethylene propylene diene rubber(mEPDM)/maleated high density polyethylene(mHDPE) (50 wt%/50 wt%) blend by melt mixing. Effects of the ATA on structure, mechanical and rheological properties of the blend was investigated. FT-IR and DMA results revealed that supramolecular hydrogen bonding interactions between the polymer chains occur by reaction of ATA with maleic anhydride grafted onto the component polymers in the blend, which induces the physical crosslinks in the blend. FE-SEM analysis showed that mEPDM forms a dispersed phase in continuous mHDPE matrix, and the blend with the ATA has finer phase morphology as compared to the blend without the ATA. By the addition of ATA in the blend, there were significant increases in tensile strength, modulus and elongation-at-break as well as elastic recoverability. Melt rheology studies revealed that ATA induced substantial increase in storage modulus and complex viscosity of the blend at the melt state.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.963-968
• /
• 2009

Liquid crystal (LC; E7 and/or ML-0249)-embedded, poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-co-HFP)-based, polymer electrolytes were prepared for use in dye-sensitized solar cells (DSSCs). The electrolytes contained 1-methyl-3-propylimidazolium iodide (PMII), tetrabutylammonium iodide (TBAI), and iodine ($I_2$), which participate in the $I_3^-/I^-$ redox couple. The incorporation of photochemically stable PVdF-co-HFP in the DSSCs created a stable polymer electrolyte that resisted leakage and volatilization. DSSCs, with liquid crystal(LC)-embedded PVdF-co-HFP-based polymer electrolytes between the amphiphilic ruthenium dye N719 absorbed to the nanocrystalline $TiO_2$ photoanode and the Pt counter electrode, were fabricated. These DSSCs displayed enhanced redox couple reduction and reduced charge recombination in comparison to that fabricated from the conventional PVdF-co-HFP-based polymer electrolyte. The behavior of the polymer electrolyte was improved by the addition of optimized amounts of plasticizers, such as ethylene carbonate (EC) and propylene carbonate (PC). The significantly increased short-circuit current density ($J_{sc}$, $14.60\;mA/cm^2$) and open-circuit voltage ($V_{oc}$, 0.68 V) of these DSSCs led to a high power conversion efficiency (PCE) of 6.42% and a fill factor of 0.65 under a standard light intensity of $100\;mW/cm^2$ irradiation of AM 1.5 sunlight. A DSSC fabricated by using E7-embedded PVdF-co-HFP-based polymer electrolyte exhibited a maximum incident photon-to-current conversion efficiency (IPCE) of 50%.