• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.224-225
• /
• 2006

The Ethylene polymerization behavior of a series of polymethylene bridged dinuclear CGC $[Zr({\eta}^{5}:{\eta}^{1}-C_{9}H_{5}SiMe_{2}NCMe_{3})Me_{2}]_{2}[(CH_{2})_{n}]\;[_{n}=6(1),\;9(2),\;12(3)]$ in the cocatalytic activation with $Ph_{3}C^{+}B^{-}(C_{6}F_{5})_{4}\;(B_{1})\;or\;Ph_{3}C^{+}(C_{6}F_{5})_{3}B^{-}C_{6}F_{4}B^{-}(C_{6}F_{5})_{3}Ph_{3}C^{+}\;(B_{2})\;or\;B(C_{6}F_{5})_{3}\;(B_{3})$ were investigated to study the nuclearity effects as well as the counteranion effects. The ethylene polymerization and ethylene/1-hexene copolymerization were conducted at $30^{\circ}C$ It was found that both in ethylene polymerization and ethylene/1-hexene copolymerization, activities increased in the order of 1 < 2 < 3, which indicates the presence of longer bridge between two active sites contributes more efficiently to facilitate the polymerization activity.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1269-1276
• /
• 1999

Metallocenes, whether using a cocatalyst or not, act as catalysts in ethylene polymerization. The positive charge on the transition metal of a metallocene might have an important role in polymerization as an active site in our model approach. Using semiempirical calculations in the absence of cocatalyst, we show one of the possibilities that the positive charge on a metallocene might be more easily transferred through the Cp ring of a ligand to the ethylene than to transfer directly from the transition metal to the ethylene. In these calculations, the charge on titanium in an eight C2H4 system is transferred and a polymer chain is produced. This reaction takes place only when ethylenes are arranged in a particular direction with respect to the ring, but does not take place for ethylenes near Ti or Cl atoms. The same mechanism is shown for a metallocene ligand which is sterically hindered or where the Cp ring is replaced by fluorenyl. These results suggest an entirely new polymerization mechanism in the absence of a cocatalyst in which the Cp ring is the active site.

• Particle and aerosol research
• /
• v.11 no.4
• /
• pp.107-113
• /
• 2015

SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.2-7
• /
• 2005

A series of ethylene polymerization catalysts based on tridentate bis-imine ligands coordinated to iron and cobalt was reported. The ligands were prepared through the condensation of sterically bulky anilines with allyloxy-and benzyloxy-substituted 2,6-acetylpyridines. The pre-catalyst complexes were penta-coordinate species of the general formula $\{[(ArN=C(Me))_2(4-RO-C_5H_3N)]MCl_2\}$ (Ar=ortho dialkyl-substituted aryl ring; R=allyl, benzyl; M=Fe, Co). In the presence of ethylene and methyl alumoxane cocatalysts, these complexes were active for the polymerization of ethylene, with activities lower than those of metal complexes of the general formula $\{[(2-ArN=C(Me)_2C_5H_3N]MCl_2\}$ (Ar=ortho dialkyl-substituted aryl ring; M=Co, Fe), containing no substituents in 2,6-acetylpyridine ring. The effects of the catalyst structure and temperature on the polymerization activity, thermal properties, and molecular weight were discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.6
• /
• pp.608-614
• /
• 2004

The gel polymer electrolyte was prepared by radical polymerization using tetra(ethylene glycol) diacrylate and tri(ethylene glycol) dimethacrylate to investigate affect of the number of ethylene oxide. The gel polymer electrolyte showed good electrochemical stability up to 4.5 V vs. Li/Li and high ionic conductivity at various temperatures. The lithium-ion polymer batteries with the gel polymer electrolyte, tetra(ethylene glycol) diacrylate- and tri(ethylene glycol) dimethacrylate-based, also represented good electrochemical performances such as rate capability, low-temperature performances and cycleability. However, the cell with tri(ethylene glycol) dimethacrylate, which has three ethylene oxide, showed better electrochemical performance.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.458-462
• /
• 2009

We have synthesized ABC linear triblock copolymers, i.e., polystyrene-b-poly(ethylene oxide)-b-polylactide, via sequential anionic and ring-opening polymerizations. In the first anionic polymerization step, styrene was polymerized in cyclohexane using sec-butyllithium as the initiator. Poly (styryl) lithium was hydroxylated by the addition of ethylene oxide, and the subsequent protonation with methanolic HCl. In the second anionic polymerization step, potassium naphthalenide was used to deprotonate the hydroxyl group of the PS to generate the macroinitiator of PS-$O^-K^+$. Polymerization of ethylene oxide was performed in THF and terminated with methanolic HCl. In the ring-opening polymerization step, the PS-b-PEO-$AlEt_2$ macroinitiator was prepared from an $AlEt_3$/pyridine system in THF, and the polymerization of lactide was performed at $90^{\circ}C$. The resulting block copolymers showed well-defined molecular weights and narrow molecular weight distributions as revealed by $^1H$- NMR spectroscopy and gel permeation chromatography (GPC).

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.2-9
• /
• 2013

We synthesized polyethylene, poly(ethylene-co-1-decene), poly(ethylene-co-p-methylstyrene), and poly(ethylene-ter-1-decene-ter-p-methystyrene) using a rac-$Et(Ind)_2ZrCl_2$ metallocene catalyst and a methylaluminoxane cocatalyst system. The materials were characterized using nuclear magnetic spectroscopy and fourier transform infrared spectroscopy. To identify suitable reaction conditions for terpolymerization, we studied the effects of catalyst content, cocatalyst/catalyst molar ratio, polymerization time, and polymerization temperature. As the catalyst content increased, the catalytic activity and the molecular weight of the terpolymers increased. The catalytic activity sharply increased but little change was observed after a polymerization time of 30 min. The increase in the cocatalyst/catalyst molar ratio resulted in a decrease in the molecular weight of the terpolymers and an increase in the catalytic activity to some degree. The catalytic activity increased with increasing polymerization temperature, while the molecular weight of the terpolymers decreased.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.282-290
• /
• 1982

Several cation exchanged-layer silicate catalysts were prepared from acid clay mainly consisted of montmorillonite, and their catalytic activities for the ethylene polymerization were studied at room temperature. It was found that over$Ni^{2+}$ -Mont, dimerization of ethylene to n-butene proceeded selectively.$Ni^{2+}$ -Mont was activated by evacuation at elevated temperature, giving a maximum temperature, 150$^{\circ}$C . The variations in catalytic activities were closely correlated to the acidity of the catalysts.$Cr^{3+}$ -Mont exhibited a high activity for the polymerization, showing, a maximum at the evacuation temperature of 450$^{\circ}C$. The active site in $Cr^{3+}$-Mont was considered to be $Cr^{3+}$ ion.

• Applied Chemistry
• /
• v.15 no.2
• /
• pp.89-92
• /
• 2011

We synthesized ethylene-styrene copolymer using pyrazolato-type metallocene catalysts. We observed the effects of ethylene contents on the catalytic activity, yield molecular weight and molecular weight distribution. We could also confirm living polymerization behavior through the changes of the M_n and M_w/M_n according to the yield.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.659-662
• /
• 2008

A new and useful poly(ethylene oxide)-based pH-sensitive block copolymer is introduced. Poly(ethylene oxide-b-N-phenylmaleimide) was first synthesized by anionic polymerization of N-phenylmaleimide (N-PMI) using mixed alkali metal polymeric alkoxide by sequential monomer addition method in the mixture of benzene/THF/DMSO (10/5/3, v/v/v) at room temperature. Reductive deimidation of the resulting block copolymer was performed using hydrazine monohydrate leading to the formation of the corresponding pH-sensitive poly(ethylene oxide-b-maleic acid).