• Macromolecular Research
• /
• v.10 no.2
• /
• pp.85-90
• /
• 2002

Poly (ethylene oxide)/polylatide/poly(ethylene oxide) (PEO/PL/PEO) tri-block copolymers, which each block is connected by ester bond, were synthesized by coupling reaction of PL with PEO in the presence of pyridine. PL/PEO/PL tri-block copolymer was synthesized by ring opening polymerization of L-lactide initiated by PEO in the presence of stannous octoate. Degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer saline (PBS) at 37$\pm$1 $^{\circ}C$. Gel permeation chromatography (GPC) and $^1$H-nuclear magnetic resonance (NMR) were used to monitor the change of mass loss, molecular weight and composition of copolymers. In hydrolytic degradation, the PEO/PL/PEO tri-block copolymer with high PEO contents affected the increase of its mass loss, and resulted in the decrease of its molecular weight as well as PEO composition. However, when PL/PEO/PL and PEO/PL/PEO tri-block copolymers had similar PEO contents, PEO/PL/PEO decreased faster in molecular weight and PEO composition than PL/PEO/PL.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.449-452
• /
• 2009

In order to improve incombustibility of EPDM(Ethylene propylene diene monomer)-based rubber, inorganic materials as $Al(OH)_3$ and $Sb_2O_3$ were added. The mechanical and thermal properties have been measured for vulcanized rubber loaded with different concentrations of $Al(OH)_3$ and $Sb_2O_3$. As inorganic material contents increases from 5phr to 30phr, the specific gravity and hardness increase while elongation at break decreases. This study performed incombustibility test and thermal analysis through TGA(Thermogravimetric Analyzer). As a results, incombustible and thermal properties of EPDM-based rubber were improved as $Al(OH)_3$ and $Sb_2O_3$ contents increase.

• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.7-14
• /
• 2002

Modified polyethylenes with polar side groups of -COOK, $-CONH_2$, and -COOH were prepared at a dispersion state in water by reacting poly(ethylene-co-methylacrylate) (PEMA) with aqueous solution of KOH and ammonia. Types and their contents of side groups were investigated by infrared spectroscopy, elemental analysis and atomic absorption analysis. Solution viscosity and surface tension were also measured as a function of solid contents. Stability and transparency of the dispersions were greatly affected by the content of COOK in the side groups. The stable dispersion could be prepared at a composition of COOK of 20 mole% at least. The transparency was increased with increasing the COOK contents, but decreased with increasing the amide content at a constant composition of COOK. Solution viscosities increased abruptly at a lower solid content when the COOK contents were increased, implying higher entanglement between the chains in dispersions with higher content of hydrophilic COOK group. The dispersions of higher COOK content revealed lower surface tension values.

• Journal of Aerospace System Engineering
• /
• v.7 no.4
• /
• pp.36-41
• /
• 2013

In order to improve incombustibility of EPDM(Ethylene propylene diene monomer)-based rubber, inorganic materials as $Al(OH)_3$ and $Sb_2O_3$ were added. The mechanical and thermal properties have been measured for vulcanized rubber loaded with different concentrations of $Al(OH)_3$ and $Sb_2O_3$. As inorganic material contents increases from 5phr to 30phr, the specific gravity and hardness increase while elongation at break decreases. This study performed incombustibility test and thermal analysis through TGA(Thermogravimetric Analyzer). As a results, incombustible and thermal properties of EPDM-based rubber were improved as $Al(OH)_3$ and $Sb_2O_3$ contents increase.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.42-47
• /
• 2019

The four different polymer compounds were manufactured to make cable sheath for ship industry. Two kinds of ethylene-vinyl acetate (EVA) were selected as main matrix polymers for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with the contents of fire retardant, silane coated aluminum hydroxide (S-ATH). Rheology, Mooney viscosity, and tensile strength increased with S-ATH contents by reinforcing effect. With increasing fire retardant amount, fire resistance increased, but cold resistance didn't show an obvious enhancement due to polar effect of vinyl acetate in EVA.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.118-122
• /
• 2019

Four different polymer compounds were manufactured to make cable sheaths for the shipping industry. Two kinds of ethylene vinyl acetate (EVA) as the main matrix polymers and EVA-grafted maleic anhydride (EVA-g-MAH) as the coupling agent were selected for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with different contents of the fire retardant, silanecoated magnesium dihydroxide (S-MDH). In the rheology evaluation, the $t_{60}$ and ${\Delta}T$ values increased with increasing S-MDH contents. On the other hand, the tensile strength decreased with increasing S-MDH content due to a relative decrease in binder polymers. With increasing S-MDH content, fire resistance increased, but cold resistance showed no obvious enhancement due to the polar effect of vinyl acetate in EVA.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.134-137
• /
• 1995

Studies on the formulations of the additives such as antioxidants, crosslinking agent, and trans-stilbeneoxide (StO) with polypropylene (PP) have been carried out to improve the resistance of gamma radiation sterilization. The irradiated PP and ethylene-propylene copolymers samples with control and additives were characterized by mechanical tester, colorimetry, and Fourier transform infrared spectroscopy with total attenuated reflectance mode (FTIR-ATR). Crosslinking agent and StO formulated PP showed remarkable radiation resistance and minimum discoloration. Also, radiation resistance of ethylene propylene copolymers with 3% of ethylene contents was better than that of PP homopolymers in the case of no additives. The proposed mechanisms of radiation stabilization with additives are also discussed.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.239-244
• /
• 1998

Iron complexes were prepared using ferric nitrate and ethylene glycol as starting materials and the ul-trafine ${\alpha}-Fe_2O_3$ particles with the sizes smaller than 200nm were obtained by the pyrolysis of iron com-plexes at over $350^{\circ}C$ In addition the decomposition mechanism of the synthesized iron complexes was in-vestigated by differential scanning calorimeter X-ray diffractometer and IR spectrometer. Transmission electron microscopy and BET method were performed to analyze the effects of ferric nitrate contents and reaction temperatures on the size and shape of the particles.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.

• Korean Journal of Metals and Materials
• /
• v.46 no.11
• /
• pp.730-736
• /
• 2008

$TiO_2$ nanotubes fabricated in aqueous HF-based electrolytes have been generally grown only to about 500nm in length because of the strong dissolubility of HF acid. In this paper, ethylene glycol solution has been applied for increasing the length of the anodic $TiO_2$ nanotubes, and the growth behaviors of the nanotubes according to water contents has been investigated. Anodization of Ti in ethylene glycol + 1 wt% $NH_4F$ (EG solution) with water additions up to 10 wt% were carried out at the constant voltage of 20 V. The results show that a thin titanium oxide layer is formed in the initial stage and the nanotube structure grows underneath the initial layer. And the length of $TiO_2$ nanotubes decreases with the increasing water content in the solution. It can be ascribed to the locally acidified circumstance around the barrier layer inside the nanopore due to $H^+$ ion originated from water. The XPS for the nanotubes suggests that the spectra of Ti2p and O1s are the major chemical bonding states of the $TiO_2$, and those for F1s, N1s and C1s come from the compound of $(NH_4)_2TiF_6$.