• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.717-722
• /
• 2015

D-limonene included in citrus fruits is obtainable to extract essential oil as well as separate the oil ingredient. Soxhlet extraction, a type of SDE (Simultaneous steam Distillation and solvent Extraction), was used to extract limonene from tangerine peel. HPLC analysis was performed to quantify extracted d-limonene by using reversed-phase HPLC column. Results of HPLC analysis showed that the optimal extraction time was 2 hours in any solvent, and the extracted amounts of d-limonene in tangerine peel (per g tangerine peel) were 7.77 mg, 0.49 mg, and 0.28 mg in ethyl alcohol, n-hexane, and ether. Because yield was the highest in using ethyl alcohol as a solvent, polarity is stronger factor to effect on yield of extraction than boiling point.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.456-461
• /
• 2001

To develop the use of natural pigment for food, carotenoids from wasted persimmon peel were extracted with seven organic solvents. Among the solvents, acetone was a high yielding solvent of carotenoids. Extraction trends depending on process variables(temperature, time, solvent ratio to persimmon peel) were explained through response surface which was made by central composite experimental design. Carotenoid contents were increased with the extraction time and solvent ratio but it decreaed in the higher experimental design. Carotenoid contents were increased with the extraction time and solvent ratio but it decreased in the higher extraction temperature. The optimum conditions of extraction process variables were predicted as 29$\^{C}$, 93min. at fixed solvent ratio(1:27).

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.328-336
• /
• 2020

Cesium is a major product of uranium fission, which is the most commonly existed radionuclide in radioactive wastes. Various technologies have been applied to separate radioactive cesium from radioactive wastes, such as chemical precipitation, solvent extraction, membrane separation and adsorption. Crown ethers and calixarenes derivatives can selectively coordinate with cesium ions by ion-dipole interaction or cation-π interaction, which are promising extractants for cesium ions due to their promising coordinating structure. This review systematically summarized and analyzed the recent advances in the crown ethers and calixarenes derivatives for cesium separation, especially focusing on the adsorbents based on extractants for cesium removal from aqueous solution, such as the grafting coordinating groups (e.g. crown ether and calixarenes) and coordinating polymers (e.g. MOFs) due to their unique coordination ability and selectivity for cesium ions. These adsorbents combined the advantages of extraction and adsorption methods and showed high adsorption capacity for cesium ions, which are promising for cesium separation The key restraints for cesium separation, as well as the newest progress of the adsorbents for cesium separation were also discussed. Finally, some concluding remarks and suggestions for future researches were proposed.

• Mass Spectrometry Letters
• /
• v.1 no.1
• /
• pp.29-32
• /
• 2010

Cross reacting antibodies can cause an overestimation of the results of immunoassays. Therefore, alternative methods are needed for the accurate quantification of steroids. Gas chromatography combined with isotope-dilution mass spectrometry (GC-IDMS) is developed to quantify urinary active androgens, testosterone, epitestosterone and dihydrotestosterone, which are clinically relevant androgens to both hair-loss and prostate diseases. The method devised involves enzymatic hydrolysis with $\beta$-glucuronidase, solid-phase extraction, liquid-liquid extraction using methyl tert-butyl ether and subsequent conversion to pentafluorophenyldimethylsilyl-trimethylsilyl (flophemesyl-TMS) derivatives for sensitive and selective analysis in selected-ion monitoring mode. Flophemesyl-TMS derivatization not only eliminates matrix interference but also has a good peak resolution within a 6 min-run. A selective and sensitive GC technique with flophemesyl-TMS derivatives also allows accurate quantitative analysis of three active androgens when combined with IDMS. The limit of quantification of the three analytes was <50 pg/mL, and extraction recoveries ranged from 91.9 to 102.1%. The precision and accuracy were 1.2~6.5% and 89.0~106.7%, respectively. This GC-IDMS method can be useful for evaluating the drug efficacy and monitoring the biological processes responsible for male-pattern baldness and prostate diseases.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.1
• /
• pp.9-18
• /
• 2010

In this study, Solid-phase micro-extraction (SPME) with Gas Chromatograph using Flame Ionization Detector (GC/FID) was studied as a possible alternative to liquid-liquid extraction for the analysis of Methyl tert-butyl ether (MTBE) and Tertiary-butyl ether (TBA) in water and an optimization condition of trace analysis of MTBE and TBA using the design of experiment (DOE) was described. The aim of our research was to apply experimental design methodology in the optimization condition of trace analysis of fuel oxygenated compounds in soil-phase microextraction with GC/FID. The reactions of SPME were mathematically described as a function of parameters of Temp ($X_1$), Volume ($X_2$), Time ($X_3$) and Salt ($X_4$) being modeled by the use of the partial factorial designs, which was used for fitting 2nd order response surface models and was alternative to central composite designs. The model predicted agreed with the experimentally observed result ($Y_1$(MTBE, $R^2$ = 0.96, $Y_2$ (TBA, $R^2$ = 0.98)). The estimated ridge of the expected maximum responses and optimal conditions for MTBE and TBA were 278.13 and (Temp ($X_1$) = $48.40^{\circ}C$, Volume ($X_2$) = 73.04 mL, Time ($X_3$) = 11.51 min and Salt ($X_4$) = 12,50 mg/L), and 127.89 and (Temp ($X_1$) = $52.12^{\circ}C$, Volume ($X_2$) = 88.88mL, Time ($X_3$) = 65.40 min and Salt ($X_4$) = 12,50 mg/L), respectively.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.265-272
• /
• 1999

A simultaneous profile analysis of 19 environmental estrogens, which act like estrogen and may effect the endocrine system by binding to hormone receptors or influencing cell signaling pathways, was attempted. The present method was based on the selected ion monitoring (SIM) mode of gas chromatography/mass spectrometry (GC/MS). It involves solid-liquid extraction, enzyme hydrolysis, liquid-liquid extraction and quantitative conversion into trimethylsilyl (TMS)-ether derivatives. Analytical recovery range was 47.6 ~ 99.5% and the RSD values of within-a-day and day-to-day test were 0.66 ~ 9.33%, 1.66 ~ 16.14%, respectively. The Korean reference values for the evaluation of environmental estrogen effects were established by this method.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.36-41
• /
• 1998

A gas chromatography-mass spectrometry method for the determination of 5-fluorourasil in human plasma is described. The method involves a single extraction procedure with 10 ml of isopropanol-ether(20:80) solution and pentafluoro-benzylation. Samples were injected using an automatic injector, followed by separation on a nonpolar capillary column and detection with a mass selective detector(MSD). No endogeneous compounds were found to interfere. The detection limit, based upon an assayed plasma volume of 0.5, was 3 ng/ml. The extraction yield was found to be above 80%. Plasma 5-FU concentrations were determined by this method in about 500 plasma samples from cancer patients undergoing treatment with 5-FU. This method is suitable for monitoring of 5-FU in plasma of cancer patients.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.638-648
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of haloacetic acid (HAAs). In this study, headspace solid-phase microextraction (HS-SPME) was studied as a possible alternative to liquid-liquid extraction for the analysis of HAAs in drinking water. The method involves direct derivatization of the acids to their methyl esters without methyl tert-butyl ether (MTBE) extraction, followed by HS-SPME with a $2cm-50/30{\mu}m$ divinylbenzene/carboxen/polydimethylsiloxane fiber. The effects of experimental parameters such as selection of SPME fiber, the volume of sulphuric acid and methanol, derivatization temperature and time, the addition of salts, extraction temperature and time, and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and limit of detection were also evaluated. The $2cm-50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, sulphuric acid of 1ml, methanol of 3ml, derivatization temperature of $50^{\circ}C$ derivatization time of 2hrs, sodium chloride salt of 10g, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were selected as the optimal experimental conditions for the analysis of HAAs. The linearities ($r^2$), relative standard deviations (%RSD) and limits of detection (LOD) for HAAs were 0.9978~0.9991, 1.1~9.8% and $0.05{\sim}0.2{\mu}g/l$, respectively.

• Biomedical Science Letters
• /
• v.6 no.3
• /
• pp.181-186
• /
• 2000

Asadisulphide were purified from Ferrula assafoetida by organic solvent extraction and chromatography. Its inhibitory effects on the TPA-induced adherence of HL-60 cells was analyzed. Since ethyl acetate extracts of F. assafoetida has the strongest inhibitory effect on adherence of HL-60 cells, it was re-extracted with ethyl acetate, hexane, and ethyl ether and chromatographed three times to isolate asadisulphide. At the minimum concentration of 2 $\mu\textrm{g}$/ml, asadisulphide inhibited adherence of 98% of HL-60 cells that have been treated with TPA. It also showed anti-cancer effect with no cytotoxity in the ED$_{50}$ value of 20 $\mu\textrm{g}$/ml.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.2
• /
• pp.12-20
• /
• 1989

Distribution of benzo(a)pyrene (BaP) in Seoul surface soils was investigated with a simple micro-analytical method consisting of ultrasonic extraction, one-dimensional dual band thin-layer chromatographic separation (TLC) and spectrofluorometric determination. The TLC was done in the following condition: thin-layer plate; Kieselguhr G/Acetylated cellulose, Developer; 1st; ether, 2nd; methanol-ether-water (4:4:1, V/V). The results thus obtained were as follows; 1. All the samples collected from various areas were contained detectable amount of benzo(a)pyrene. The range and average of benzo(a)pyrene contents in Seoul areas are 0.20 $\sim$5.90ppm and 1.01 ppm, respectively. 2. Benzo(a)pyrene contents in soils obtained from commercial areas were much higher than those in industrial and residential areas. The contents range in commercial, industrial, and residential areas are 0.31 $\sim$ 5.90 ppm, 0.36 $\sim$ 1.22 ppm and 0.20 $\sim$ 0.67 ppm, respectively. 3. Benzo(a)pyrene contents in soils from major roads were far higher than those from side or park roads. The ranges of benzo(a)pyrene contents in major, park and side road are 0.40 $\sim$ 5.9 ppm, 0.20 $\sim$ 0.70 ppm, 0.31 $\sim$ 1.30 ppm, respectively. These findings suggest strongly that surface soils in Seoul city are polluted by benzo(a)pyrene probably emitted automobiles.