• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.522-525
• /
• 2002

A very rapid and efficient separation technique for cellular rhizobial cyclosophoraoses was developed based on fractional precipitation and partition chromatography. Cyclosophoraoses are known to function in the osmotic regulation and root nodule formation of legumes during the nitrogen fixation process. Cyclosophoraoses are produced as unbranched cyclic (1longrightarrow12)-${\beta}$-D-glucans in Agrobacterium or Rhizobium species. Recent research has shown that cyclosophoraoses can form inclusion complexation with various unstable or insoluble guest chemicals, thereby implying great potential for industrial application. Typical separation of pure cellular cyclosophoraoses has been so far carried out by several time-consuming steps, including size exclusion, anion exchange, and desalting liquid chromatographies, with a relatively poor recovery. However, the proposed method demonstrated that the successive application of fractional ethanol precipitation and one step of silica gel-based flash column chromatography was enough to simultaneously purify neutral or anionic forms of cyclosophoraoses. This novel technique is very rapid and provides a high recovery.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.209-216
• /
• 2002

Bacillus sp. A56 was studied, because of its high flocculating activity. The flocculating substance produced by this strain was purified by ethanol precipitation, cetylpyridinium chloride (CPC) precipitation, and gel permeation chromatography (GPC). The FT-IR spectrum of the purified bioflocculant, designated as BF-56, showed typical characteristics of polysaccharides. The non-sugar substituents, and sugar components of BF-56 containing glucose, fucose, glucuronic acid, and galactose in an approximate molar ratio of 2.76:1.10:1:0.12, suggested that it was a novel bioflocculant with an estimated molecular mass of over $7{\times}10^3$ kDa. Rheological analysis of BF-56 revealed that it was a pseudoplastic that had higher apparent viscosity rate at dilute concentrations than those of zooglan. The solution of bioflocculant BF-56 exhibited non-Newtonian characteristics and it was compatible to high concentrations of salts such as KCl, NaCl, $CaCl_2,\;or\;FeCl_3.$ The present results suggested strong possibility of bioflocculant BF-56 to be fully applicable to industries such as wastewater treatment.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.45-52
• /
• 1997

It is the problem point of stability for this study to produce cosmetics and to occur in the circulation process, and specially in a case of alcoholic toilet water the precipitation materials to float on content materials has study on the solubility of perfume, and it has practiced in order to examine the problem point whether the raw materials of plastic vessel is or not harmful in content materials. In testing result, A study on stability of alcoholic toilet water is above all the precipitation materials which floats in content materials, and It is appeared by combination ratio to the raw materials of perfume, ethanol, solubilizer and refining water etcs, and in second the alkali degree which has gushed out of glass vessel can understand the thing that the change of PH is largely increased following to the passage of time, and in third the harmful component of content materials out of raw material in plastics vessel must certainly consider a stability and a safety in quality control of products.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.890-894
• /
• 2001

The isolation of genomic DNA from mammalian cells is usually performed by cell lysis followed by protein digestion, extraction, and finally, ethanol precipitation of the chromosomal DNA. However, in the case of large sample numbers or when only small amounts of starting materials are available, such conventional methods are not efficient and are cumbersome to be applied. Some alternative methods have been described as well as having commercial DNA isolation kits to be available, nevertheless, there is room left for much improvement. In the present study, a novel method is introduced, where it simplifies conventional protocols by omitting some time-consuming steps such as protease incubation or DNA precipitation and its resuspension. Using paramagnetic silica resins, the genomic DNA was purified over a magnetic field, and the bound DNA was eluted with a low-salt buffer. The fidelity and effectiveness of this novel method was determined by using normal and apoptotic cells as a starting material and then compared to other protocols. The high speed and convenience along with its high efficiency in detecting apoptotic chromosomal DNA will prove this method to be an improved alternative in the isolation of genomic DNA from mammalian cells.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.267-273
• /
• 2008

Water-soluble fraction (WSF) from edible mushroom hinmogi (Tremella fuciformis) were obtained by water extraction, and polysaccharides in the WSF were separated by ethanol precipitation. The inhibitory effects of the polysaccharides on 3T3-L1 adipocyte differentiation were evaluated by the reduction of peroxisome proliferators-activated receptor ${\gamma}$ ($PPAR{\gamma}$) translation, triglyceride accumulation, Oil Red-O staining, and expression levels of $PPAR{\gamma}$, CCAAT/enhancer binding protein a (C/$EBP{\alpha}$), and leptin. The $PPAR{\gamma}$ translation in 3T3-L1 cells was inhibited by the treatment with polysaccharide precipitated by 80% ethanol (P80) which showed highest inhibitory activity among polysaccharides tested. In addition, treatment of P80 to 3T3-L1 cells significantly inhibited the triglyceride accumulation, Oil Red-O staining, and mRNA expression of $PPAR{\gamma}$, C/$EBP{\alpha}$, and leptin in a dose-dependent manner. Based upon these results, P80 from edible mushroom hinmogi shows the inhibitory activity on the differentiation of 3T3-L1 adipocytes. Therefore, it might be employed as a potential anti-obesity material.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2017

Highly uniform and well-dispersed Zeolitic Imidazolate Framework-7 (ZIF-7) particles were prepared by the precipitation of $Zn^{2+}$ using benzimidazole, which were converted into ZnO nanoparticles by heat treatment at $500^{\circ}C$ for 24 h. The ZIF-7 derived ZnO nanoparticles showed abundant mesopores, high surface area, and good dispersion. The gas sensing characteristics toward 5 ppm acetone, ethanol, trimethylamine, ammonia, p-xylene, toluene, benzene, and carbon monoxide and carbon dioxide were investigated at $350-450^{\circ}C$. ZIF-7 derived ZnO nanoparticles exhibited high response to 5 ppm acetone ($R_a/R_g=57.6$; $R_a$: resistance under exposure to the air, Rg: resistance under exposure to the gas) at $450^{\circ}C$ and negligible cross-responses to other interference gases (trimethylamine, ammonia, p-xylene, toluene, benzene, carbon monoxide, carbon dioxide) and relatively low responses to ethanol. ZIF derived synthesis of metal oxide nanoparticles can be used to design high performance acetone sensors.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.588-594
• /
• 1998

Lactic acid bacteria were isolated from Kimchi and screened for bacteriocin production. Strain SE1, identified as Lactobacillus curvatus sp., showed the strongest inhibitory activity against Lactobacillus delbrueckii subsp. delbrueckii. The bacteriocin was inactivated by amyloglucosidase, trypsin, or protease K treatment. However, it maintained its activity under heat treatment at $100^{\circ}C$ for 60 min. The production of the bacteriocin had a growth-related mode and decreased around the early-stationary phase. The optimum temperature for the growth of L. curvatus SE1 was $37^{\circ}C$; however, the optimum temperature for bacteriocin production was $30^{\circ}C$. The bacteriocin activity was decreased by treatment with methanol, butanol, acetone, or chloroform, however, it was not affected by treatment with ethanol, iso-propanol, or cyclohexane. The inhibitory activity of bacteriocin was stable over a wide range of pHs (2 to 11). The bacteriocin from L. curvatus SE1 killed the indicator strain by a bactericidal mode of action. The bacteriocin from L. curvatus SE1 was partially purified by ethanol precipitation and ion exchange chromatography. SDS-polyacrylamide gel electrophoresis was used to determine the molecular weight of the bacteriocin by the bacteriocin activity test. The apparent molecular mass of the bacteriocin produced by L. curvatus SE1 was about 14 kDa.

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.44-48
• /
• 1990

Alkalophilic sp. YC-335 isolated from soil was capable of producing large amount of cyclodextrin glycosyltransferase (CGTase) in culture broth. This enzyme was successively purified 52.9 folds with 17.8 yield by ethanol precipitation, DEAE-Toyopearl column chromatography and Sephadex G-100 column chromatography. The purified enzyme have a molecular weight of approximately 75,000 estimated by SDS polyaerylamide gel electrophoresis. The optimum pH and temperature for the enzyme activity were 6.0 and 5$0^{\circ}C$, respectively. The enzyme stable between pH 6 and 10, and up to 5$0^{\circ}C$. The thermostability of the enzyme was increased up to 6$0^{\circ}C$ by the addition of 15mM CaCl$_2$.

• KSBB Journal
• /
• v.31 no.2
• /
• pp.126-134
• /
• 2016

To examine the possibility of using Musa sapientum L. (Banana) leaf extract as a cosmetic raw material, banana leaves grown in Jeju Island were extracted with 70% ethanol. Polysaccharides present in banana leaf extract were discarded by precipitation with cold ethanol. Polysaccharide-discarded banana leaf extract promoted procollagen and COL1A1 gene expression, but inhibited matrix metalloproteinase (MMP)-1 and MMP-2 gene expression in human skin fibroblasts when examined by real-time reverse-transcription polymerase chain reaction (RT-PCR) and enzyme-linked immunosorbent assay (ELISA). The active compound in banana leaves was identified by fractionation with various solvents. The chloroform fraction showed the highest anti-wrinkle efficacy and the active compound of chloroform fraction was identified as corosolic acid by NMR, FT-IR, EA, and HPLC-MS. In addition, banana leaf extract showed anti-oxidative efficacy with an IC50 value of 67.91 ppm, as determined by DPPH free radical scavenging assay. Finally, the anti-wrinkle efficacy of banana leaf extract-containing cream was confirmed by clinical tests. Based on these results, banana leaves could have an application as a cosmetic raw material with anti-wrinkle efficacy.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.433-438
• /
• 2012

A chemical process involves polymerization within microspheres, whereas a physical process involves the dispersion of polymer in a nonsolvent. Nano-sized monodisperse microspheres are usually prepared by chemical processes such as water-based emulsions, seed suspension polymerization, nonaqueous dispersion polymerization, and precipitation polymerizations. Polymerization was performed in a four-necked, separate-type flask equipped with a stirrer, a condenser, a nitrogen inlet, and a rubber stopper for adding the initiator with a syringe. Nitrogen was bubbled through the mixture of reagents for 1 hr. before elevating the temperature. Functional silane (3-mercaptopropyl)trimethoxysilane (MPTMS) was used for the modification of silica nanoparticles and the self-assembled monolayers obtained were characterized by X-ray photoelectron spectroscopy (XPS), laser scattering system (LSS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental analysis (EA), and thermogravimetric analysis (TGA). In addition, polymer microspheres were polymerized by radical polymerization of ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) and acrylamide monomer via precipitation polymerization; then, their characteristics were investigated. From the elemental analysis results, it can be concluded that the conversion rate of acrylamide monomer was 93% and that polyacrylamide grafted to MPSN nanospheres via the radical precipitation polymerization with AAm in ethanol solvent. The microspheres were successfully polymerized by the 'graft from' method.