• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.155-165
• /
• 2013

PURPOSES : Benefits for improvement of travel time reliability obtained from construction of new highways should be considered as a major factor in the feasibility study for highway constructions. The purpose of this study is to develop a method of estimation for the value of travel time reliability. METHODS : Highway type (urban/rural highway) and traffic flow type(interrupted/uninterrupted) was considered to estimate he value of travel time reliability. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when travel time reliability is improved. Finally the value of travel time reliability was estimated using the results of survey and logit model. The value of travel time reliability was estimated considering travel objectives, time constraint travel and non-time constraint travel. RESULTS: The value of travel time reliability of business trip is higher than that of non-business trip. The value of travel time reliability of time constraint travel is higher than that of non-time constraint travel. The value of travel time reliability in urban area is higher than that in rural area. CONCLUSIONS: It was concluded that the proposed method in this study is more realistic and proper to estimate the value of travel time reliability because it reflects the situations of time constraint travel and non-time constraint travel.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.367-372
• /
• 2004

Highway have to be constructed under thorough investigation about function, economy, safety of the traffic and environment, because they are needing huge budget for construction and management as important facilities of the social overhead capital in the national economics. Initially the construction of roads becomes effective the plan, the design, construction phase. The design is foundation of accomplishment of the roads operation, the results of the design operation come to much effect a nation when using roads. Especially ancient design methods were not expected for visual effects as attaching weight to 2-dimensional drawing from flat. Therefore, it is difficult to recognize troubles happened during the work operation besides, many troubles are solved by modification of drawings as situations. For solving of those of the problems, it is emphasize on visual effect through introduction of 3-dimensional design from the initial phase. In case of national conditions, limited national land has caused increasing weight for construction of the roads through cities as the urban centered development. thereupon, citizens are increasing concern about the right of the light and the environmental effect, road designs and construction of the structures under agreement with local residents cause to make troubles. The analysis of 3-dimensional design is necessary as intermediation for decision making. In this study, Virtual reality techniques in 3-dimensional roads design are expected to visual effect on the publishing Internet Web, find problems in first phase and make decision between users and people having civil appeal.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.103-106
• /
• 2004

Nowadays it is necessary to manage the road system effectively because of the explosive increment of vehicle and goods. To resolve this problems through the fast upgrade of information about position and time of moving vehicle, the combined navigation system using GPS and complementary navigation system, i.e. INS, DR, etc. has been used. Although GPS is popular for the vehicle navigation system, this is not useful for the kinematic positioning of the vehicles in the urban canyon because of its few satellites. Therefore, this study deals with the kinematic positioning of the vehicles with GPS CORS to GPS navigation. For this, first the static single point positioning of GPS and GPS for reference station was performed to evaluate the accuracy of GPS positioning. Next, in the post-processed, the DGPS (Differential GPS) was performed for the kinematic positioning of the vehicles. So, it is expected that GPS CORS can be applicable to the control of traffic flow, the effective management of road system, and the development of ITS and it is regarded that the combined navigation system of vehicles with GPS, INS, and DR, etc. should be studied constantly.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.83-95
• /
• 2017

PURPOSES : The purpose of this study is to develop a regression model to predict the International Roughness Index(IRI) and Surface Distress(SD) for the estimation of HPCI using Expressway Pavement Management System(PMS). METHODS : To develop an HPCI prediction model, prediction models of IRI and SD were developed in advance. The independent variables considered in the models were pavement age, Annual Average Daily Traffic Volume(AADT), the amount of deicing salt used, the severity of Alkali Silica Reaction(ASR), average temperature, annual temperature difference, number of days of precipitation, number of days of snowfall, number of days below zero temperature, and so on. RESULTS : The present IRI, age, AADT, annual temperature differential, number of days of precipitation and ASR severity were chosen as independent variables for the IRI prediction model. In addition, the present IRI, present SD, amount of deicing chemical used, and annual temperature differential were chosen as independent variables for the SD prediction model. CONCLUSIONS : The models for predicting IRI and SD were developed. The predicted HPCI can be calculated from the HPCI equation using the predicted IRI and SD.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.2
• /
• pp.97-106
• /
• 2001

The purpose of this paper is to determine the expected percentage of the 'VTS addressable' casualties that could be prevented with the installation of fourth level(Automatic Dependent Surveillance) of coastal VTS. In this study, it determines the VTS benefit by multiplying casualty rate reduction factors by the effect level of causal factors. The development of casualty rate reduction factors was based on the questionnaire survey, and the evaluation of effect levels was based on the causal analysis using functional block diagram. The results of this paper are compared With the results of worldwide literature related to the VTS effectiveness. One or more of the key variable inputs of this study, casualty rate reduction factors, may be somewhat uncertain and therefore subject to sensitivity analysis.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.127-134
• /
• 2011

A traffic accident which happens in Expressway during dense fog is more likely to cause the sequential accidents and high death rate. So, the preventive measures shall be taken at dangerous areas to enhance the efficiency of roads and minimize the accidents and the resultant damages. So, it is necessary to find out the characteristics of freeway zone which has high risk of fog occurrence and to establish the comprehensive safety strategy on installation and operation of the safety equipment. In this study, I developed a fog forecasting model by using the freeway fog data. This model can be used as the fog forecasting model in dealing with fog problems when new road is planned. The model was developed by using a statistical analysis technique or the regression analysis, focusing on the variables such as geographical features and regional conditions, distances to water sources and the area of water source. I have segmented the models by classifying the area into inland area and coastal area. The distance to water source and area of the water source located around the freeway were found to be main factors causing fog.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.197-202
• /
• 2004

It is well known that the hydrodynamic interaction forces between ship and bank wall affect ship manoeuvring motion. This paper deals with the interaction effect acting on a ship navigating closely in the proximity of bank wail. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic interaction forces between ship and bank wail is applied. The hydrodynamic interaction forces acting on a ship during passing through the proximity of the bank wail are predicted to evaluate an influence of these interaction forces on ship manoeuvrability. The calculation method used in this paper will be useful for prediction of ship manoeuvrability at the initial stage of design, for automatic control system of ship in confined waterways, for discussion of marine traffic control system and for construction of harbour.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.45-55
• /
• 2012

PURPOSES : Skid resistance and noise of roads highly depend on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information for the skid resistance and noise of road. Generally, Sand Patch Test is performed in order to estimate MTD(Mean Texture Depth). However, it is time-consuming and needs traffic control. This study aimed to investigate the effectiveness of measurement texture depth using the Portable Laser Profiler that give the MPD(Mean Profile Depth). METHODS : MTD and MPD were collected on the number of expressway sections including Central Inland Test Road sections in Korea. Statistical analysis are performed to establish the relationship between MTD data based on Sand Patch Test and MPD data obtained by the Portable Laser Profiler. RESULTS : Linear relationship MPD and MTD is observed for both of asphalt pavement and concrete pavement such as R-square of 0.51 to 0.58. CONCLUSIONS : Even though, the test method and definition of MPD and MTD are different. EMTD(Estimated Mean Texture Depth) can be obtained by using the correlationship between MPD with MTD.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.67-77
• /
• 2002

Air traffic increased 12% annually in Korea since 1988 after the Olympics, this rate is two times than the rate of the world average. In order to accommodate fast growing aviation demand, Incheon International Airport is operated at Yongjong Island since March, 2001. The Incheon airport project will continue till 2020. After the final phase in 2020, Incheon International Airport will handle 100 million passengers, 530,000 flights and 7 million tons of cargo annually. In this study, air pollution from aircraft and other sources are calculated and assessed in Incheon International Airport area by EDMS(Emission and Dispersion Modeling System), which is a combined emission and dispersion model for airport. EDMS could also be considered power plant, incinerator and aircraft support equipment such as ground support equipment, aerospace ground equipment, auxiliary power units. And EDMS is recommended as preferred model for air quality assessment of the airport area by U.S. EP A. The result of this study shows that NOx emission from aircraft and support utility is estimated as 27,000 - 35,000 ton/yr and Namdong-Gu area in Incheon city is affected as 30-60 ppb by the NOx emission from these sources in 2020, the final phase of Incheon international airport construction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.25-32
• /
• 2011

Measurement noise variance of the radar is one of the main inputs of a state estimator of surveillance data processing system for air traffic control and has influences on the accuracy performance of maneuvering target tracking. A method is presented of estimating measurement noise variances every frame of target tracking using likelihood functions of multiple IMM filter. The results by running of Monte Carlo simulation show that variances are estimated within 5% of errors compared with true values and the tracking accuracy performance is improved.