• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.309-314
• /
• 2006

In general DGPS system, the correction message is transferred to users by wireless modem. To cover wide area, many DGPS station should be needed. And DGPS users must have a wireless modem that is not necessary in standalone GPS. But SBAS users don't need a wireless modem to receive DGPS corrections because SBAS correction message is transmitted from the GEO satellite by L1 frequency band. SBAS signal is generated in the GUS(Geo Uplink Subsystem) and uplink to the GEO satellite. This uplink transmission process causes two problems that are not existed in GPS. The one is a time delay in the uplink signal. The other is an ionospheric problem on uplink signal, code delay and carrier phase advance. These two problems cause ranging error to user. Another critical ranging error factor is clock synchronization. SBAS reference clock must be synchronized with GPS clock for an accurate ranging service. The time delay can be removed by close loop control. We propose uplink ionospheric error correcting algorithm for C/A code and carrier. As a result, the ranging accuracy increased high. To synchronize SBAS reference clock with GPS clock, I reviewed synchronization algorithm. And I modified it because the algorithm didn't consider doppler that caused by satellites' dynamics. SBAS reference clock synchronized with GPS clock in high accuracy by modified algorithm. We think that this paper will contribute to basic research for constructing satellite based DGPS system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.539-549
• /
• 1999

In this paper, the bit error rare (BER) performance of DS/CDMA DQPSK communication system in the presence of multi access interference, impulsive noise and Nakagami fading is investigated. The DS/CDMA DQPSK communication system adopts Maximum Ratio Combining (MRC) diversity reception and error correcting BCH code technique to enhance system performance. Using the derived error probability equation, the error rate performance of DS/CDMA DQPSK communication system has been evaluated and shown in figures to discuss as a function of impulsive index(A), Gaussian noise to impulsive noise power ratio($\Gamma$'), multi access interference(Κ), Nakagami fading parameter(m), the number of diversity branch (Ｌ), the number of error correction symbol (t), PN code sequence length(N) and $E_b/N_0$. The error performance of DS/CDMA-MDPSK signals improve by adopting MRC diversity and BCH(15,7) coding technique in the environment of impulsive noise plus Nagakami fading. From the results, we known that proposed system is affected by multi access interference, impulsive noise and Nakagami fading in radio communication system environment. Also, BER performance of DS/CDMA DQPSK communication system cam be improved increasing either the power of desired signal or the value of Gaussian noise to impulsive noise power ratio. And BCH(15,7) code technique is more effective to restrain the affection of multi access, interference, impulsive noise and Nakagami fading in DS/CDMA DQPSK communication system than MRC diversity reception technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8C
• /
• pp.763-770
• /
• 2006

In this paper, a variable Reed-Solomon(RS) decoder with erasure decoding functionality is designed based on the modified Euclid's algorithm(MEA). The variability of the decoder is implemented through shortening and puncturing based on the RS(124, 108, 8) code, other than the primitive RS(255, 239, 8) code. This leads to shortening the decoding latency. The decoder performs 4-step pipelined operation, where each step is designed to be clocked by an independent clock. Thus by using a faster clock for the MEA block, the complexity and the decoding latency can be reduced. It can support both continuous- and burst-mode decoding. It has been designed in VHDL and synthesized in an FPGA chip, consuming 3,717 logic cells and 2,048-bit memories. The maximum decoding throughput is 33 MByte/sec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.43-50
• /
• 2012

The use of an error-correcting code is essential in digital communication systems where the channel is noisy. Unless a receiver has accurate channel coding parameters, it becomes difficult to decode the digitized encoding bits correctly. In this paper, estimation algorithm for RM(Reed-Muller) codes using FHT (Fast Hadamard algorithm) is proposed. The proposed algorithm estimates the channel coding parameters of RM codes and then decodes the codes using the characteristic of FHT. And we also verify the algorithm by performing intensive computer simulation in additive white gaussian noise (AWGN) channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.57-70
• /
• 2008

This paper introduces a new paradigm of physical layer security through channel coding for wireless networks. The well known spread spectrum based physical layer security in wireless network is applicable when code division multiple access (CDMA) is used as wireless air link interface. In our proposal, we incorporate the proposed security protocol within channel coding as channel coding is an essential part of all kind of wireless communications. Channel coding has a built-in security in the sense of encoding and decoding algorithm. Decoding of a particular codeword is possible only when the encoding procedure is exactly known. This point is the key of our proposed security protocol. The common parameter that required for both encoder and decoder is generally a generator matrix. We proposed a random selection of generators according to a security key to ensure the secrecy of the networks against unauthorized access. Therefore, the conventional channel coding technique is used as a security controller of the network along with its error correcting purpose.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.186-196
• /
• 2015

In resource-constrained, low-cost, radio-frequency identification (RFID) sensor-based mobile ad hoc networks (MANETs), ensuring security without performance degradation is a major challenge. This paper introduces a novel combination of steps in lightweight protocol integration to provide a secure network for RFID sensor-based MANETs using error-correcting codes (ECCs). The proposed scheme chooses a quasi-cyclic ECC. Key pairs are generated using the ECC for establishing a secure message communication. Probability analysis shows that code-based identification; key generation; and authentication and trust management schemes protect the network from Sybil, eclipse, and de-synchronization attacks. A lightweight model for the proposed sequence of steps is designed and analyzed using an Alloy analyzer. Results show that selection processes with ten nodes and five subgroup controllers identify attacks in only a few milliseconds. Margrave policy analysis shows that there is no conflict among the roles of network members.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.272-274
• /
• 2011

최근 들어 케이블 방송망을 기반으로 한 디지털 방송, VoIP(Voice over Internet Protocol), VOD(Video on Demand), 영상전화, 이동전화, 무선 랜 로밍 등의 다양한 멀티미디어 서비스의 출현과 향후 도입될 새로운 융합형 멀티미디어 서비스의 수용을 위해 케이블 망의 고도화에 대한 요구가 제기되었다. 특히 유럽을 중심으로 이러한 요구를 만족시키기 위해 DVB(Digital Video Broadcasting)-C2 규격의 개발이 진행되었다. DVB-C2 규격에서는 기존의 게이블 전송 규격인 DVB-C에 대해 30% 이상의 전송 효율을 높이고자 새로운 변조 방식과 채널 오류정정 부호 방식을 도입하였다. 이에 본 논문은 본 논문에서는 DVB-C2 규격에서 도입된 채널 오류정정 부호인 BCH(Bose, Chaudhuri, and Hocquenghem) 부호와 LDPC(Low Density Parity Check) 부호의 연접 방식에 대한 성능을 검증하고자 한다. 이를 위해 개발된 시뮬레이터의 소개와 이를 통한 시험결과를 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.827-830
• /
• 2003

오류정정부호는 메모리 시스템 설계, 디지털 데이터 통신 등에 널리 적용된다. 오류정정부호는 원래의 정보에 검사비트를 부여함으로써 설계되며, 이 검사비트를 이용하여 오류를 정정한다. 본 논문에서는 셀룰라 오토마타의 특성행렬을 이용하여 검사비트를 생성하고 수신된 부호어를 복호하는 방법을 제시한다.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.27-32
• /
• 2003

An efficient soft-decision decoding algorithm for binary block codes it proposed. The proposed soft-decision decoding algorithm is implemented by a series of hard-decision decoding process. By the hard-decision decoding result, the candidate codewords are efficiently searched for A new decoding method, which prevents the missing of the candidate codeword, is proposed. Also, the method fir reducing complexity is developed. This method removes the practical complexity increase caused by the improved algorithm. There facts are confirmed by the simulation results for binary (63, 36) BCH code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1745-1747
• /
• 2016

In this paper, we propose a construction method of irregular quasi-cyclic low-density parity-check codes based on perfect difference families with various block sizes. The proposed codes have advantages in that they support various values with respect to code rate, length, and degree distribution. Also, this construction enables very short lengths which are usually difficult to be achieved by a random construction. We verify via simulations the error-correcting performance of the proposed codes.