• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.844-852
• /
• 2020

This study is to understand the preferences of pilots, flight engineers and crew who work in the same aircraft but are exposed to different working environments and perform different mission operations in order to develop an ergonomic flight jacket. Based on a preliminary investigation, a survey of 107 pilots and 36 flight engineers and crew was conducted. The results are as follows; Pilots can control the temperature inside the cockpit, so they are less exposed to the cold when working, while flight engineers and crew are exposed to the cold more because they have many external tasks. The reason for the problem of the current flight jacket was a difference in ranking between two groups, but the highest ranking was poor dimensional suitability due to the habit of wearing layers of clothing. As a result of preferred design, there were significant differences between groups in the item of overall style. Pilots preferred a bomber jacket style(P:68.2%, E&C:44.4%), on the other hand, flight engineers and crew preferred a field jacket style(P:26.2%, E&C:55.6%)(p<.01). They preferred a stand collar(P:71.0%, E&C:86.1%), a fastener slider for a front fastening(P:62.6%, E&C:61.1%), fastener tape cuffs(P:54.2%, E&C:47.2%), a jacket with a softshell(P:86.9%, E&C:83.3%), fleece as softshell material(P:88.8%, E&C:69.4%), and fastener sliders as a attaching method(P:69.2%, E&C:61.1%). A hem fastening will be selected differently according to the overall style of outshell. Additionally, they preferred more than 5ea pockets(P:51.4%, E&C:44.4%), fastener sliders as pocket's fastenings(P:48.6%, E&C:61.1%), armpit ventilations(P:62.9%, E&C:58.5%). The results of above will be considered to design an ergonomic flight jacket.

• 디자인학연구
• /
• 제13권3호
• /
• pp.253-260
• /
• 2000

필기구는 그 구조와 사용특성상 여타 제품과는 다른 특징을 많이 띠는 제품이다. 즉, 다양한 종류의 필기구라 할지라도 대체로 공통적인 구조나 부품으로 구성된 경우가 많다. 또한 제품 전체가 항상 손에 잡혀져 필기가 이루어진다는 점에서 인체공학적인 디자인이 필수적인 제품이다. 소비자들이 필기구를 고르는 데 있어 가장 중요하게 여기는 요소가 필기감이라는 것을 감안하면, 스타일링 위주의 디자인을 행하기 보다 필기감 향상에 영향을 주는 요소 중에서도 디자인이 기여할 수 있는 인간공학적인 개선이 매우 유효한 개선 방법이 된다고 할 수 있다. 현재까지도 인간과 일의 이해를 바탕으로한 인간공학 (Ergonomics)적 접근이나 필기구를 쥐었을 때의 편안함 등에 대한 문제해결은 부족한 면이 적지 않으며, 인간과 일의 관계에 의해 인간사회는 유지되며 독특한 문화를 형성한다는 근본적인 인식을 바탕으로 필기구 디자인은 문화적인 차원에서의 인간공학적 접근을 시도해야 한다. 이에 본 연구에서는 다양한 필기구의 인간공학적 디자인 크라이테리어를 재정립하고, 실제 실험을 통하여 필기구가 가져야하는 기본적인 제원에 대하여 정리하여 향후 필기구 개발에 기초자료로 쓰기 위한 시도를 하였다. 이러한 연구는 필기구 개발의 통합적 전개, 즉 동시공학적 개발을 위한 기초자료로서 나 각 부품별 모듈 시스템을 통한 모델 다각화 전략의 초석이 되는 데이터베이스 개발에도 효과적으로 응용될 수 있다.

• 복식문화연구
• /
• 제19권3호
• /
• pp.473-487
• /
• 2011

The purpose of this study is to analyze the body type and fashion of posthuman in SF movies. The method of this study was to analyze documentaries, internet web site, fashion books and so forth. The results were as follows: The body types of posthuman were expressed as mutation type, prosthetic type, clone type by biological hybrid or renovation and digital type by computer simulation. The mutation type was expressed as reinforcement of masculinity or feminity and reinforcement of body functions. The fashion item was expressed as a black tailored suit, leather jacket, cat suit, whip, black sunglass, garter belt, high heel shoes, short pants, black one piece dress and functional body suit. The prosthetic type was expressed as reinforcement of body functions and reinforcement of masculinity or feminity. The fashion item was expressed as a military item, high-tech power suit and ergonomic armor suit. The clone type was expressed as the plural ego with reinforcement of body functions. The fashion item was expressed as a power shoulder jacket, fake fur coat, vinyl, black see-through look and functional suit. The digital type was expressed as reinforcement of masculinity or feminity and the plural ego with reinforcement of body functions. The fashion item was expressed as a data suit, leather jacket, black over coat, boots, black sun glass, ethnic items and military items. The meanings of posthuman fashion in SF movies were impurity of posthuman, display of superhuman's power by sexuality, metaphor of power and fantasy of superhero in opposition futuristic dystopia. As mentioned above, posthuman body type and fashion in SF movies become the conversational topic in the real world. The fact that we think about utopia and identity of posthuman in the future is of great significance.

• 패션비즈니스
• /
• 제20권1호
• /
• pp.35-52
• /
• 2016

Yeohlee Teng's 'Urban Nomad' concept stresses high mobility and flexibility in 'Clothing-as-shelter' in order to satisfy the needs of urban dwellers. Yeohlee interprets clothing as a portable environment that protects and shelters urban nomads as well as creates space of clothing as intimate architecture. This study examines Nomadism in Yeohlee's designs since 1981 when she received the attention from the fashion critics, by conducting literary survey as well as case analysis. Nomadism in Yeohlee's work showed the following characterizes. First, 'modular system' deals with the organized dressing system that enables interchanging and layering of separates that function in the fifth season; second, 'organic geometry' describes the architectonic approach to clothing as wearable structure that transforms two dimensional geometry into three dimensional form; third, 'functionalism' refers to the use of technological novel materials, ergonomic clothing construction, and the strategy of using structure as decoration; and fourth, 'reductionism' is the economical approach for realizing Nomadism, which is composed of one-size-fits-all as well as unisex size system and 'zero waste' strategy to maximize use of a piece of cloth.

• 한국의류학회지
• /
• 제36권8호
• /
• pp.791-801
• /
• 2012

We performed an assessment of wearing, purchasing, satisfaction, and the fit of brassieres according to body and breast type for college women to provide basic data on the manufacture of an ergonomic brassiere. The classifications of domed and conical breast type or projecting and conical breast type were unclear. Flat breast were dissatisfied with the shape of small and flat, and drooping breast were dissatisfied with the shape of big, projected, and drooping. In purchasing a brassiere, the majority of subjects were ignorant of their brassiere size, and over 80% of the subjects bought a brassiere without trying it on. Over 50% of those surveyed said they found it difficult to buy a well-fitted brassiere, particularly for the flat and drooping breast type. Over 70% of those surveyed wore a brassiere of 3/4 cup size, the slim body type wore a brassiere of 1/2 cup size; however, the obese body type wore a brassiere of full-cup size. The flat-breast or slim-body wore a brassiere of a thick pad type but projecting-breast or drooping breast wore brassiere of a thin pad type. Many of the subjects wore an unfitted brassiere in cup size and under bust size. In the classification of breast type, there were slight differences between the breast type that they recognized and the breast type that they were shown. There were distinctions in function, satisfaction, and fitness based on breast type. Therefore, the development of an ergonomic brassiere should considered the characteristics of breast type for fitness and comfort.

• International Journal of Advanced Culture Technology
• /
• 제11권4호
• /
• pp.302-309
• /
• 2023

Wearable devices, attached to the human body, track and enhance users' activities, health, and communication. Therefore, considering ergonomic factors in product design is crucial. However, previous research has somewhat overlooked the importance of integrating ergonomic design elements into a broad spectrum of design factors. This study aims to examine the impact of physical attributes inherent in smart wristbands and smartwatches on the perceived functional value, specifically, perceived usefulness, ease of use, and fit. A survey was conducted among 289 US adults who had experience using smart wristbands or smartwatches. The collected data were analyzed using descriptive statistics, factor analysis, Cronbach's alpha, t-test, MANOVA, and regression analysis in SPSS version 29. The results showed that the shape of the front display significantly influenced perceived ease of use, and the product's weight had a substantial impact on both perceived ease of use and fit. Furthermore, distinct technical features on the front display had varied effects on perceived usefulness, ease of use, and fit. Notably, the presence of activity tracking, alarm, and calendar functionalities led to distinct differences in ease of use and fit. Features such as distance tracking, phone call, social media notifications, text messaging, and time display functions showed significant influences on the perception of fit. These findings provide insights into the physical values of smart wristbands and smartwatches as perceived by users.

• 패션비즈니스
• /
• 제27권5호
• /
• pp.135-145
• /
• 2023

The purpose of this paper is to develop a workwear design framework that can be applied in workwear design. A general explorationstudy was conducted onworkwear concepts and market research to understand the importance and growth potential of workwear. Subsequently, representative brands specializing in workwear are selected, and a case analysis of workwear is conducted with a focus on jackets, pants, and overall items. As a result, four key characteristics of workwear are derived: Ergonomic Pattern-making, Certified Fabric, Specialized Color, and Customized Details. To present a model that considers the functional, expressive,and aesthetic aspects of workwear simultaneously, the 'Function Express Aesthetic' (FEA) model is utilized as the foundation. The 12 derived elements in the newly developed framework combine these four characteristics with three aspects (functional, expressive, and aesthetic), allowing for comprehensive consideration and validation of workwear conditions. The new framework will be used in subsequent research for developing workwear prototypes and is expected to enhanceworkwear production by employing a systematic approach during the design ideation and evaluation stages. By effectively integrating functional aspects with expressive-aesthetic values centered on the functionality of workwear products, this framework will provide.

• 패션비즈니스
• /
• 제27권6호
• /
• pp.37-46
• /
• 2023

This study aims to develop workwear prototypes by applying a systematic approach considering the characteristics of workwear. A case study was conducted before this study to derive workwear's four characteristics: 'Ergonomic Pattern-Making, Certified Fabric, Specialized Color, and Customized Details.' a prior study proposed the integrated framework combining these characteristics with the FEA model. The new framework identified that these characteristics are considered in terms of functionality, expression, and aesthetics; it can increase workers' satisfaction and meet the market demand without concentrating on only particular aspects. Before prototype production, the requirements for each characteristic of workwear were analyzed through theoretical research of previously published related papers. The study primarily gathered workwear requirements data and sources from consumer satisfaction surveys and investigations into the wearing conditions of work clothes. When considering all aspects of pattern-making, fabric, color, and detail in functionality, 'comfort movement, body protection, improved work efficiency' were identified as necessary. Expressive requirements were fundamental, including 'reflecting the wearer's preferences, expressing a sense of belonging and identity. It was clear that incorporating design elements and applying current trends to the aesthetic requirements of work clothes was necessary. Four prototypes comprised two top and bottom sets and two overalls using these requirements. The framework was used throughout the entire process of planning, producing, and evaluating prototypes, and through this, the results fulfilled the requirements. This study is significant because it produced workwear prototypes using an integrated approach that considered functional, expressive, and aesthetic aspects.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.102-114
• /
• 2016

The purpose of this study is to enable a scientific and rational approach for future research agenda setting in the clothing construction field. Through analysis of research papers on clothing construction published in domestic academic journals during the recent decade, the research trend of clothing construction in respective academic journals, research subjects, and research contents were grasped thoroughly. From all domestic academic associations' publication on garment/clothing and textiles/fashion, 7 academic journals were selected as subjects of research, in order to compare and analyze the research trend in the last ten years. The ten-year period ranged from April 2006 to March 2016, and a total of 735 papers published on clothing construction were used for analysis. The number of publications in the clothing construction area during the last decade has decreased, which is due to the increase in the number of clothing and textiles fashion-related academic journals, other than the 7 journals analyzed, and since the number of papers published in international academic journals has also increased. Body type, patterns, fitting test, and functional clothing accounted for the highest proportion of research themes in clothing construction. In terms of body type, there was an increasing tendency towards usage of 3D body measurement. In the patterns area, the 3D virtual dressing system was actively used. For functional clothing, sportswear, protective clothes, and innerwear were most widely researched, and ergonomic design together with smartwear was actively studied.