• 제목/요약/키워드: ergodic

검색결과 162건 처리시간 0.028초

데이터 운송 중계기를 운용하는 무선 선형 네트워크에서의 전송률 성능 분석 (Network Throughput Analysis of Mechanical Relay Assisted Transmission in Wireless Line Networks)

  • 진현보;민병윤;서정욱;김동구
    • 한국통신학회논문지
    • /
    • 제39B권4호
    • /
    • pp.216-227
    • /
    • 2014
  • 데이터-운송 중계기(mechanical relay: McR)는 운송 지연 및 간헐적 접속단절을 반영하는 중계기법 중에 하나다. 기존의 비이동성 중계기법과 달리, 데이터-운송 중계기법은 다양한 종류의 차량 및 교통기반시설의 이동성을 이용하여 근거리의 송수신이 가능하게 하는 점에서 잠재적인 이득이 존재한다. 본 논문에서는 McR을 운용하는 무선 선형 네트워크(wireless line networks: WLN)를 고려하고, 각 사용자간의 다중 홉 무선전송 기법과 데이터-운송 중계기법을 비교하고, 에르고딕 네트워크 전송률의 관점에서 분석한다. 또한 Vehicle SISO(Ve-SISO) 뿐만 아니라 Vehicle SIMO/MISO(Ve-SIMO/MISO)의 경우에 대해서도 McR의 사용을 고려한다. 에르고딕 네트워크 전송률에 대한 실험 결과로부터 McR의 속도, 사용자와 McR의 밀도, 그리고 McR의 사용방식에 따라서 나타나는 트레이드-오프관계를 살펴본다.

정상 에르고드성을 가지는 확률과정 스펙트럼에 대한 합리적 시계열 데이터 확보 (Data Acquisition of Time Series from Stationary Ergodic Random Process Spectrums)

  • 박준범;김경수;정준모;김재우;유창혁;하영수
    • 한국해양공학회지
    • /
    • 제25권2호
    • /
    • pp.120-126
    • /
    • 2011
  • The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

주파수 공유 시스템에서 일차 사용자에 의한 간섭이 존재할 때 채널 평균값 기반 전력 할당 기법의 성능 분석 및 평가 (Performance Analysis and Evaluation of Mean Value-based Power Allocation in Spectrum Sharing Systems with Interference from the Primary Transmitter)

  • 임성묵;홍대식
    • 대한전자공학회논문지TC
    • /
    • 제49권8호
    • /
    • pp.77-83
    • /
    • 2012
  • 본 논문에서는 주파수 공유 시스템의 구 채널 환경(outdated channel environment)에서 일차 사용자(primary user)에 의한 간섭이 존재할 때 이차 사용자(secondary user)의 평균값 기반 전력 할당 기법의 성능을 분석하고, 평가한다. 일차 사용자의 신호가 이차 사용자의 수신단에서 간섭으로 작용할 때, 이차 사용자의 에르고딕 용량(ergodic capacity)의 상한값을 분석하고, 이를 기반으로 일차 사용자에 의한 간섭이 이차 사용자의 성능 저하에 어느 정도 영향을 끼치는지 고찰한다. 모의 실험을 통해 간섭에 의한 이차 사용자의 성능 저하 정도를 보이고, 일차 사용자에 의한 간섭이 커질수록, 평균값 기반 전력 할당 기법의 용량이 구 채널 정보 기반 전력 할당 기법의 용량보다 좋아지는 영역이 작아지는 것을 보여준다.

Soft Network Coding in Wireless Two-Way Relay Channels

  • Zhang, Shengli;Zhu, Yu;Liew, Soung Chang
    • Journal of Communications and Networks
    • /
    • 제10권4호
    • /
    • pp.371-383
    • /
    • 2008
  • Application of network coding in wireless two-way relay channels (TWRC) has received much attention recently because its ability to improve throughput significantly. In traditional designs, network coding operates at upper layers above (including) the link layer and it requires the input packets to be correctly decoded. However, this requirement may limit the performance and application of network coding due to the unavoidable fading and noise in wireless networks. In this paper, we propose a new wireless network coding scheme for TWRC, which is referred to as soft network coding (SoftNC), where the relay nodes applies symbol-by-symbol soft decisions on the received signals from the two end nodes to come up with the network coded information to be forwarded. We do not assume further channel coding on top of SoftNC at the relay node (channel coding is assumed at the end nodes). According to measures of the soft information adopted, two kinds of SoftNC are proposed: amplify-and-forward SoftNC (AF-SoftNC) and soft-bit-forward SoftNC (SBF-SoftNC). We analyze the both the ergodic capacity and the outage capacity of the two SoftNC schemes. Specifically, analytical form approximations of the ergodic capacity and the outage capacity of the two schemes are given and validated. Numerical simulation shows that our SoftNC schemes can outperform the traditional network coding based two-way relay protocol, where channel decoding and re-encoding are used at the relay node. Notable is the fact that performance improvement is achieved using only simple symbol-level operations at the relay node.

Bi0.5(Na0.78K0.22)0.5TiO3 세라믹스의 A-site 비화학양론이 유전 및 전기적 특성에 미치는 영향 (A-site Non-stoichiometric Effects of Bi0.5(Na0.78K0.22)0.5TiO3 Ceramics on the Dielectric and Electrical Properties)

  • 박정수;이규탁;윤지선;조정호;정영훈;백종후
    • 한국전기전자재료학회논문지
    • /
    • 제27권12호
    • /
    • pp.803-808
    • /
    • 2014
  • $Bi_{0.5+x}(Na_{0.78}K_{0.22})_{0.5-3x}TiO_3$ ceramics with an excess $Bi^{3+}$ and a deficiency of $Na^+$ and $K^+$ were synthesized by a conventional solid state reaction method. The structure and morphology of $Bi_{0.5+x}(Na_{0.78}K_{0.22})_{0.5-3x}TiO_3$ ceramics were characterized by X-ray diffraction and field emission scanning electron microscopy. The electric polarization and mechanical strain induced by external electric field, and the temperature dependence of dielectric constant were investigated. These results demonstrated that an ergodic relaxor phase can be induced by controls of the mole ratio of $Bi^{3+}$, $Na^+$ and $K^+$. A phase boundary between non-ergodic and ergodic relaxor phases can be observed at ambient temperature. The ergodic relaxor phase can be transferred to the ferroelectric phase by application of the electric field. The stability of the induced ferroelectric phases strongly depends on the mole ratio of $Bi^{3+}$, $Na^+$ and $K^+$. The maximum strain of 0.31% was observed in $Bi_{0.51}(Na_{0.78}K_{0.22})_{0.47}TiO_3$ ceramics sintered at $1,150^{\circ}C$ for 2 h.