• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.876-878
• /
• 2000

In this paper, the characteristic of the Linear DC motor(LDM) are analyzed by using 3 Dimensional Equivalent Magnetic Circuit Network (3D EMCN), the movement of mover substitutes for the movement of magnetization in permanent magnet expressed by Fourier series, thrust characteristic analysis is performed and the appropriateness of analysed result is verified by comparing with the results of 2 Dimensional Finite Element Method (2D FEM) and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.19-21
• /
• 1998

The problem in improving the positioning precision of a Permanent Magnet Linear Synchronous Motor (PMLSM) is the detent force caused by the interaction of the magnets with the teeth of stator. This paper presents 3-Dimensional Equivalent Magnetic Circuit Network Method (3-D EMCN) for the analysis of PMLSM. 3-D EMCN is a numerical analysis method which supplements magnetic equivalent circuit by using numerical technique. We analyzed the fields and forces of PMLSM in case of skewed magnet and axially segmented magnet construction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.773-775
• /
• 2002

This paper deals with 3 Dimensional(3D) analysis of magnetic flux density of High Temperature Superconducting(HTS) motor using 3D Equivalent Magnetic Circuit Network (EMCN). When the Finite Element Method (FEM) is applied to an analysis of 3D models, it takes much time to the pre-process work required for 3D modeling and to solve the differential equation. Compare with 3D FEM, the result of 3D EMCN by using the magnetic resistance and magnetomotive force is exact and rapid. The accuracy of 3D EMCN is verified by comparing the 3D EMCN analysis with that of 3D FEM in HTS motor.

• 한국전자파학회논문지
• /
• 제29권9호
• /
• pp.677-684
• /
• 2018

본 연구는 S-parameter를 이용한 변압기의 고주파 모델링 방법을 제시한다. 1차측과 2차측을 단락 또는 개방 회로를 구성하여 각 상태에서의 반사계수를 Vector Network Analyzer로 측정하였다. 측정 결과로부터 등가회로 소자를 추출하여 고주파 등가회로를 모델링하고, 2-port 회로에서 측정한 S-parameter 측정치와 시뮬레이션 결과를 비교함으로써 타당성을 검증하였다. 이는 정확하고 예측 가능한 고주파 변압기를 설계하는데 적용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.15-17
• /
• 1999

This paper proposes that optimal design using GA of BLDC motor. To estimate this optimal design method, the performance characteristics of BLDC motor is computed by the equivalent magnetic circuit network method and FEM. To estimate especially the dynamic characteristics of BLDC, we compute the parameter of electrical circuit using FEM.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 추계연구발표회 논문개요집
• /
• pp.122-123
• /
• 1998

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2605-2614
• /
• 2002

This paper describes an analysis method based on the experimental parameter for the 0.9kW starter motor of vehicle with permanent magnet and pole core, and analyzed the influence by the effect of pole core of starting motor by using the 2D-FEM analysis technique to reflect the structural characteristic of 3D. A starter motor consists mainly of armature, yoke and permanent magnet with the pole core. Additionally, there is different the axial length of each part. Therefore, the effective of analysis method is needed to improve the characteristic of it. This paper approached the 2D-FEM analysis estimated by the 3D-EMCN(Three Dimensional Equivalent Magnetic Circuit Network) instead of the 3D-FEM analysis to minimize parameters. As a result, this paper is proposed the validity of 2D-FEM analysis and obtained reasonable results for improving a performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.234-241
• /
• 2002

An optical pickup actuator is an objective-lens-moving mechanism that provides a means to follow the disk displacement accurately(1). In this paper, a slim type optical pickup actuator for Notebook PCs is analyzed and designed to improve the driving sensitivity A three dimensional equivalent magnetic circuit network method (3D-EMCN method) is proposed for an analysis method which provides better characteristics in both precision and computation time of analysis comparing with a commercial three-dimensional finite element (3D-FEM) codes. To verify the validity of proposed method, we made a comparison between the analysis results and the experimental ones. We also compared this analysis results with 3D-FEM results. Among the several optimal algorithm, we adopt a niching genetic algorithm, which renders a set of the multiple optimal solutions. RCS (Restricted Competition Selection) niching genetic algorithm is used for optimal design of the actuator's performance. Recently, the pickup actuator needs additional driving structure for radial and tangential tilting motion to obtain better pick-up performance. So we applied the proposed method to the model containing tilting coils.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.228-233
• /
• 2002

A computational method for analysis of the 3 dimensional electro-magnetic induction problems has been developed. The developed method is capable of modeling the induced current and analyzing its characteristics using only scalar Potential at each node. A benchmark model of asymmetrical conductor with a hole is analyzed to verify the application of the developed method. The calculated value of magnetic flux density are compared with the measured value, and the results indicate that the developed method is valid. Also, Comparing with 3-D finite element method (FEM) results, we conformed effectiveness of the developed method for the accuracy and computation times.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.693-695
• /
• 2001

A computational method for the 3 dimensional electro-magnetic induction problems has been developed. The proposed method is capable of modeling the eddy current and analyzing its characteristics using only scalar potential. A benchmark model of asymmetrical conductor with a hole is analyzed to verify the application of the developed method. The calculated value of magnetic flux density are compared with the measured value, and the results indicate that the developed method is valid.