Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Characteristic Analysis of an Automotive Starter Motor with Pole Core

보조극형 자동차 시동용 직류전동기의 특성해석

  • 배준영 (경북대학교 대학원 기계공학과) ;
  • 김진구 (㈜카스코 기술연구소 제품개발부) ;
  • 이상룡 (경북대학교 공과대학 기계공학부)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes an analysis method based on the experimental parameter for the 0.9kW starter motor of vehicle with permanent magnet and pole core, and analyzed the influence by the effect of pole core of starting motor by using the 2D-FEM analysis technique to reflect the structural characteristic of 3D. A starter motor consists mainly of armature, yoke and permanent magnet with the pole core. Additionally, there is different the axial length of each part. Therefore, the effective of analysis method is needed to improve the characteristic of it. This paper approached the 2D-FEM analysis estimated by the 3D-EMCN(Three Dimensional Equivalent Magnetic Circuit Network) instead of the 3D-FEM analysis to minimize parameters. As a result, this paper is proposed the validity of 2D-FEM analysis and obtained reasonable results for improving a performance.

Keywords

References

  1. Jung, J. H., Shin, S. H. and Lee, S. R., 2002a, 'Optimization of the Design Variables of Linear Motor by FEM,' Transactions of the KSME A, Vol. 26, No. 7, pp. 1232-1240
  2. Ko, H. S. and Kim, K. J., 2000a, 'Analytical Analysis of Cogging torque in Motors of Permanet Magnetic Type,' Transactions of the KSME A, Vol. 24, No. 7, pp. 1795-1800
  3. Kang, G. H. and Hong, J. P., 1999, 'Design and Characteristic analysis of Pemanet Magnetic Apparatus,' Transactions of the KIEE, Vol. 48, No. 6, pp. 15-30
  4. Hur, J., Jung, I. S. and Hyun, D. S., 1998, 'Lateral Characteristic Analysis of PMLSM Considering Overhang Effect by 3 Dimensional Equivalent Magnetic Circuit Network Method,' IEEE Transactions on Magnetics, Vol. 34, No. 5, pp. 3528-3531 https://doi.org/10.1109/20.717832
  5. Kawase, Y., Yamaguchi, T. and Hayashi, Y., 1995, 'Analysis of Cogging Torque of Permanet Motor by 3-D Finite Element Method,' IEEE Transactions on Magnetics, Vol. 31, No. 3, pp. 2044-2047 https://doi.org/10.1109/20.376445
  6. Hong, J. P. and Im, D. H., 1994, 'Magnetic Field Analysis of Permanent Magnetic Motor by 3D Equivalent Magnet Circuit Netwok Method,' Transactions of the KIEE, Vol. 43, No. 9, pp. 1432-1439
  7. 大川光吉, 1984, '永久磁石回轉機の設計.特性計算法,' TDK CORPORATION
  8. 任達鎬, 1986, '電氣界의 有限要素法,' 東明社
  9. Salon, S.J., 1995. 'Finite Element Analysis of Electrical Machines,' Kluwer Academic Publishers