• 제목/요약/키워드: equivalent impedance

검색결과 490건 처리시간 0.024초

$ITO/TPD/Alq_3/Al$ 유기발광소자의 등가회로 분석 (Equivalent-Circuit Analysis of Organic Light-Emitting Diodes in $ITO/TPD/Alq_3/Al$)

  • 안준호;오용철;홍진웅;이준웅;송민종;김태완
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.188-191
    • /
    • 2004
  • We have investigated equivalent-circuit analysis of organic light-emitting diodes in $ITO/TPD/Alq_3/Al$. Complex impedance Z of the device was measured in the frequency range of $40Hz{\sim}1MHz$. We are able to interpret the frequency-dependent response in terms of equivalent-circuit model of contact resistance $R_s$ in series with two parallel combination of $R_{TPD},\;C_{TPD}\;and\;R_{Alq3},\;C_{Alq3}$.

  • PDF

배전계통에 사용되는 봉형 접지전극의 접지 임피던스 특성 분석 (Ground Impedance Characteristics Analysis of a Rod Type Grounding Electrode used for Distribution Systems)

  • 김경철;진성은;이주홍;김유준;최종기;백남웅
    • 조명전기설비학회논문지
    • /
    • 제19권6호
    • /
    • pp.67-74
    • /
    • 2005
  • 접지 시스템은 전기설비의 기준 전위점을 확보할 뿐만 아니라, 대지에 낮은 저항으로 고장 전류를 흐르게 한다. 고장전류는 넓은 범위의 주파수를 포함하기 때문에 접지의 성능을 평가하기 위해선 주파수에 대한 함수로 접지임피던스에 대한 특성의 분석이 필요하다. 본 논문에서는 상용화된 접지봉(매직봉)의 접지임피던스를 0[Hz]에서 100[kHz] 범위까지 측정하였고, 접지임피던스를 회로 모델과 전달함수 모델로 구하여 측정된 값과 비교 검토하였다.

배전계통에 사용되는 동봉 접지전극의 접지 임피던스 특성 분석 (Ground Impedance Characteristics Analysis of a Copper Rod-type Grounding Electrode used for Electric Distribution Systems)

  • 김경철;이주홍;진성은;오정석;박상영;최종기;김유준
    • 조명전기설비학회논문지
    • /
    • 제19권6호
    • /
    • pp.46-51
    • /
    • 2005
  • 접지 시스템은 전기설비의 기준 전위점을 확보할 뿐만 아니라 대지에 낮은 저항으로 고장 전류를 흐르게 한다. 주파수에 대한 함수로 접지임피던스는 고장전류가 넓은 범위의 주파수를 포함하기 때문에 접지 성능을 평가하는데 필요하다. 동봉은 배전계통에서 가장 많이 쓰이는 접지 전극이다. 본 논문에서는 동봉의 접지임피던스를 주파수 60[Hz]에서 100[kHz] 범위까지 측정하였고, 접지임피던스를 회로 모델과 전달함수 모델로 구하여 측정된 값과 비교 검토하였다.

Development of an Intelligent Charger with a Battery Diagnosis Function Using Online Impedance Spectroscopy

  • Nguyen, Thanh-Tuan;Doan, Van-Tuan;Lee, Geun-Hong;Kim, Hyung-Won;Choi, Woojin;Kim, Dae-Wook
    • Journal of Power Electronics
    • /
    • 제16권5호
    • /
    • pp.1981-1989
    • /
    • 2016
  • Battery diagnosis is vital to battery-based applications because it ensures system reliability by avoiding battery failure. This paper presents a novel intelligent battery charger with an online diagnosis function to circumvent interruptions in system operation. The charger operates in normal charging and diagnosing modes. The diagnosis function is performed with the impedance spectroscopy technique, which is achieved by injecting a sinusoidal voltage excitation signal to the battery terminals without the need for additional hardware. The impedance spectrum of the battery is calculated based on voltage excitation and current response with the aid of an embedded digital lock in amplifier in a digital signal processor. The measured impedance data are utilized in the application of the complex nonlinear least squares method to extract the battery parameters of the equivalent circuit. These parameters are then compared with the reference values to reach a diagnosis. A prototype of the proposed charger is applied to four valve-regulated lead-acid batteries to measure AC impedance. The results are discussed.

조밀한 표면조직을 갖는 탄소재료의 Impedance Spectroscopy를 통한 전기화학적 거동의 해석 (A Study on the Electrochemical Behavior of Carbon Material with Compact Surface Using Impedance Spectroscopy)

  • 오한준;이종호;이영훈;고영신
    • 대한화학회지
    • /
    • 제40권5호
    • /
    • pp.308-316
    • /
    • 1996
  • Impedance Spectroscopy를 통하여 조밀한 표면조직을 갖는 glassy carbon과 PVDF 합성흑연의 표면에 대한 전기화학적 거동을 조사하였다. 이들 두 탄소재료는 모두 전압에 대한 높은 Faraday-임피던스의존성이 나타났으며, 이를 평가하기 위한 등가회로는 PVDF 흑연의 경우 lassy carbon의 등가회로에 소수성 결합제에 의한 저항과 축전용량이 추가된 형태로 나타났다. 또한 디들 재료는 표면의 차이로 인한 전기화학적 거동의 차이도 나타났다.

  • PDF

Development of an Impedance Locus Model for a Protective Relay Dynamic Test with a Digital Simulator

  • Kim, Soo-Nam;Lee, Myoung-Soo;Lee, Jae-Gyu;Rhee, Sang-Bong;Kim, Kyu-Ho
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권2호
    • /
    • pp.167-173
    • /
    • 2011
  • This paper presents a method for the development of the impedance locus to test the dynamic characteristics of protective relays. Specifically, using the proposed method, the impedance locus can comprise three impedance points, and the speed of impedance trajectory can be adjusted by frequency deviation. This paper is divided into two main sections. The first section deals with the configuration of impedance locus with voltage magnitude, total impedance magnitude, and impedance angle. The second section discusses the control of the locus speed with the means of the deviation between two frequencies. The proposed method is applied to two machine equivalent systems with offline simulation (i.e., PSCAD) and real-time simulation (i.e., real-time simulation environment) to demonstrate its effectiveness.

다 단자망 축약 이론을 이용한 TRV 해석 (TRV analysis by using multi - port equivalent)

  • 윤재영;문영현;박동욱
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 추계학술대회 논문집 학회본부
    • /
    • pp.236-240
    • /
    • 1988
  • The simplified equivalent by using the short circuit impedance has been used for analyzing the prospective transient recovery voltage of the large power system. But it sometimes generates untorelable error in the rate-of-rise of TRV when using the Thevenin equivalent source. This paper provides the new equivalent by using the multi-port theory. The application of the new method to the sample system gives satisfactory accuracy compared with the short-circuit equivalent.

  • PDF

SIR을 이용한 제 2저지 대역 제어 가능 UWB 안테나 (A UWB Antenna with the Adjustable Second Rejection Band Using a SIR)

  • 최형석;최경;황희용
    • 한국전자파학회논문지
    • /
    • 제23권9호
    • /
    • pp.1019-1024
    • /
    • 2012
  • 본 논문에서는 SIR(Step Impedance Resonator)을 이용하여 제 1저지 대역인 5 GHz WLAN 대역의 신호 간섭을 제거하며 제 2저지 대역을 제어할 수 있는 UWB 안테나를 제안하였다. SIR은 단일 임피던스 공진기와는 다르게 Step Impedance의 차이로 제 2고조파가 정해지는 특징이 있으므로 UWB 안테나에 적용하여 제 2저지 대역을 제어 가능하도록 하였다. 또한, 제 1저지 대역에서 안테나의 동작을 등가 회로로 나타내었으며, SIR의 등가 모델값 및 안테나와 SIR의 결합 값을 구하였다. 제안된 안테나는 UWB 전체 대역에서 -10 dB 이하의 반사 손실 특성과 5 GHz WLAN 대역에서 저지 특성을 나타내었다. 또한, H-평면에서 +y방향으로 지향성을 나타내며, 1.0 ns 이내의 군지연 변화 특성을 나타내었다.

$ITO/Alq_3/Al$ 구조 유기 발광 소자의 유전분극 현상의 연구 (A Study on the Dielectric Polarization of $ITO/Alq_3/Al$ Structure Organic Light-emitting Diodes)

  • 오용철;신철기;김충혁
    • 전기학회논문지
    • /
    • 제57권1호
    • /
    • pp.73-77
    • /
    • 2008
  • We have investigated dielectric polarization in organic light-emitting diodes using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric polarization of organic light-emitting diodes using characteristics of impedance and equivalent circuit of $ITO/Alq_3/Al$. Impedance characteristics was measured complex impedance Z and phase ${\theta}$ in the frequency range of $1{\times}40Hz\;to\;1{\times}10^8Hz$. We obtained complex electrical conductivity, dielectric constant, and loss tangent(tan${\delta}$) of the device at room temperature. And, we obtained the equivalent circuit of $ITO/Alq_3/Al$ through analyzing dielectric constant and dielectric loss tangent. From these analyses, we could interpret a conduction mechanism and dielectric polarization.

Effect of $HfO_X$ treatment on ITO surface of organic light emitting diodes using Impedance spectroscopy analysis

  • Cho, Jae-Hyun;Park, Hyung-Jun;Han, Kyu-Min;Sohn, Sun-Young;Jung, Dong-Geun;Yi, Jun-Sin
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.506-508
    • /
    • 2008
  • In this work, we used impedance spectroscopy analysis to determine the effect of the $HfO_X$ treatment on the surface of ITO and to model the equivalent circuit for OLEDs. Devices with an ITO/Organic material/Al structure can be modeled as resistances and capacitances arranged in parallel or in series. The number of elements depends on the composition of the structure, essentially the number of layers, and the contacts.

  • PDF