• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.3
• /
• pp.56-60
• /
• 1999

In this study the feasibility of usage of raw sludge (sludge from water treatment plant) and chalk from schools and institutes was investigated to remove the phosphorus in water and wastewater. In this study phosphorus removal efficiencies of sludge and chalk were investigated by changing various factors. The time to reach the equilibrium using chalk and raw sludge under different pHs was obtained. Based on this result, Freudlich adsorption isotherm was applied. Results showed that a portion of phosphorus was removed by adsorption to chalk and raw sludge. The phosphorus removal efficiency using calcinated chalk was about three times higher than that of chalk. It means that some portion of $CaCO_3$ contained in chalk was converted to CaO by calcination and this was proved by X-ray diffraction experiment. About 90% phosphorus removal was observed using sludge and calcinated chalk respectively while about 20% phosphorus removal efficiency was achieved using chalk from the water sample in Lake Sihwa.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.498-503
• /
• 1995

The adsorption behaviors of two major components purified, endo Ⅱ and exo Ⅱ, from Trichoderma viride were investigated using microcrystalline cellulose with different specific surface area as substrates. Adsorption was found to apparently obey the Langmuir isotherm and the thermodynamic parameters, ΔH, ΔS, and ΔG, were calculated from adsorption equilibrium constant,K. The adsorption process was found to be endothermic and an adsorption entropy-controlled reaction. The amount of adsorption of cellulase components increased with specific surface area and decreased with temperature and varied with a change in composition of the cellulase components. The maximum synergistic degradation occurred at the specific weight ratio of the cellulase components at which the maximum affinity of cellulase components obtains. The adsorption entropy and enthalpy for respective enzyme system increased with specific surface area increase. The adsorption entropy was shown to have a larger value with enzyme mixture.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.534-540
• /
• 2017

The adsorption of uranium (VI) by calcium alginate beads was examined by batch experiments. The effects of environmental conditions on U (VI) adsorption were studied, including contact time, pH, initial concentration of U (VI), and temperature. The alginate beads were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Fourier transform infrared spectra indicated that hydroxyl and alkoxy groups are present at the surface of the beads. The experimental results showed that the adsorption of U (VI) by alginate beads was strongly dependent on pH, the adsorption increased at pH 3~7, then decreased at pH 7~9. The adsorption reached equilibrium within 2 minutes. The adsorption kinetics of U (VI) onto alginate beads can be described by a pseudo first-order kinetic model. The adsorption isotherm can be described by the Redlich-Peterson model, and the maximum adsorption capacity was 237.15 mg/g. The sorption process is spontaneous and has an exothermic reaction.

• Membrane and Water Treatment
• /
• v.12 no.2
• /
• pp.51-58
• /
• 2021

The natural weathered sand of basalt (WSB) has been used for the removal of cadmium from aqueous solution. The influence of various parameters i.e., contact time, pH, weathered sand of basalt dosage, particle size of the weathered sand of basalt, temperature and initial cadmium concentration were analyzed. Cadmium adsorption kinetics was well described by the pseudo second order model. Adsorption equilibrium for cadmium was properly well fitted to Langmuir isotherm model with maximum adsorption capacity 0.50 mg/g. Compared with the other experimental results using various kinds of adsorbents at a low concentration (1.0 mg/L or so) similar to that of this study, the cadmium removal efficiency using weathered sand of basalt was higher. It has been demonstrated that weathered sand of basalt has a available alternative adsorbent for cadmium when its initial concentration is low.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1112-1119
• /
• 2018

Dicalcium phosphate nanoparticles (DCP-NPs) was synthesized chemically and used for adsorptive removal of uranyl ions from aqueous solutions in a batch system. A commercial grade of DCP (monetite) was also employed for comparison. The synthesized and commercial adsorbents (S-DCP and C-DCP) were characterized by FT-IR, SEM and XRD techniques. The investigation of adsorption isotherms indicated that the maximum adsorption capacities ($q_m$) for C-DCP and S-DCP were 714.3 and $666.7mg\;g^{-1}$ (at 293 K), respectively. The experimental kinetics were well-described by the pseudo-second-order kinetic and the equilibrium data were fitted with both Langmuir and Freundlich adsorption models. Thermodynamic studies indicated that the adsorption of uranyl ions on the monetite surface was a spontaneous exothermic process. The exhausted adsorbents could be regenerated by washing with $0.10mol\;L^{-1}$ NaOH.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.143-152
• /
• 2018

The process parameters of ethyl violet from aqueous solution by activated carbon adsorption were carried out as a function of pH, temperature, contact time, initial concentration and temperature. The adsorption equilibrium data can be described well by the Langmuir and Freundlich isotherm models. Base on Langmuir constant ($R_L=0.0343{\sim}0.0523$) and Freundlich constant (1/n=0.1633~0.1974), This process could be employed as effective treatment for adsorption of ethyl violet. The kinetic experimental results showed that the adsorption process can be well described with the pseudo second order model. Based on the positive enthalpy (6.505 kJ/mol), the adsorption of ethyl violet onto granular activated carbon is endothermic. The negative Gibbs free energy (-1.169~-1.681 kJ/mol) obtained indicates that the adsorption process is spontaneous and physisorption.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.119-129
• /
• 2003

The Langmuir adsorption isotherms of the over-potentially deposited hydrogen (OPD H) fur the cathodic $H_2$ evolution reaction (HER) at the poly-Au and $Rh|0.5M\;H_2SO_4$ aqueous electrolyte interfaces have been studied using cyclic voltammetric and ac impedance techniques. The behavior of the phase shift $(0^{\circ}{\leq}{-\phi}{\leq}90^{\circ})$ for the optimum intermediate frequency corresponds well to that of the fractional surface coverage $(1{\geq}{\theta}{\geq}0)$ at the interfaces. The phase-shift profile $({-\phi}\;vs.\;E)$ for the optimum intermediate frequency, i.e., the phase-shift method, can be used as a new electrochemical method to determine the Langmuir adsorption isotherm $({\theta}\;vs.\;E)$ of the OPD H for the cathodic HER at the interfaces. At the poly-Au|0.5M $H_2SO_4$ aqueous electrolyte interface, the equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the OPD H are $2.3\times10^{-6}$ and 32.2kJ/mol, respectively. At the poly-Rh|0.5M $H_2SO_4$ aqueous electrolyte interface, K and ${\Delta}G_{ads}$ of the OPD H are $4.1\times10^4\;or\;1.2\times10^{-2}$ and 19.3 or 11.0kJ/mol depending on E, respectively. In contrast to the poly-Au electrode interface, the two different Langmuir adsorption isotherms of the OPD H are observed at the poly-Rh electrode interface. The two different Langmuir adsorption isotherms of the OPD H correspond to the two different adsorption sites of the OPD H on the poly-Rh electrode surface.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.199-204
• /
• 2015

In this study, we aimed to make antibiotic-intercalated smectite composites using amoxicillin and clarithromycin as hygroscopic antibiotics, and gentamicin, tobramycin and netilmicin as non-hygroscopic aminoglucosides, and to check their drug delivery potential in gastric system using preliminary in-situ column release test for clarithromycinsmectite composite. All antibiotics were successfully intercalated into the interlayer of smectite by cation-exchange reaction in the batch experiment. Equilibrium batch test showed that clarithromycin-intercalation followed Langmuir isotherm and the possible maximum amount was calculated as 1.811 mmole/g. Clarithromycin was continuously released by the solutions of pH=2, 3, and 4 and the amount was decreased with pH increase.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.513-518
• /
• 2010

This study was carried out to estimate the moisture sorption characteristics and prediction model of anchovy powders with different particle size as above 80 mesh, 80-60 mesh and 40-60 mesh. The equilibrium moisture content had higher values at lower storage temperatures, and higher water activity. The monolayer moisture content calculated using the GAB equation showed a higher level of significance than that of BET equation. The estimated monolayer moisture content was 0.024-0.052 g $H_2O/g$ dry solid. The absorption enthalpy was calculated with different particle size and various water activities. It showed that the absorption energy was decreased with increasing water activity but no difference was found on particle size increasement. The fitness of the isotherm curve was shown to be in the order of Khun, Halsey, Caurie and Oswin model. The prediction model equations for the moisture content were established by ln(time), water activity, and temperature, respectively. The model equation will be helpful for future work on drying and storage of anchovy powder.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.3-10
• /
• 2016

Effects of acid ($HNO_3$ and HCl) modification on the adsorption properties of Pb(II) and Cu(II) onto bamboo-based activated carbon (BAC) were investigated through a series of batch experiments. The carbon content increased and oxygen content decreased with acid treatment. $HNO_3$ induced carboxylic acids and hydroxyl functional groups while HCl added no functional group onto BAC. The pseudo-second order model better described the kinetics of Pb(II) and Cu(II) adsorption onto experimented adsorbents, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption involving valency forces through sharing or exchange of electrons between the adsorbate and the adsorbent. The equilibrium sorption data followed both Langmuir and Freundlich isotherm models. The adsorption capacities of BAC were affected by the surface functional groups added by acid modification. The adsorption capacities were enhanced up to 36.0% and 27.3% for Pb(II) and Cu(II), respectively by the $HNO_3$ modification, however, negligibly affected by HCl.