• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1273-1284
• /
• 2018

The flow and bed change were analyzed using the CCHE2D model, which is a two-dimensional numerical model, at a confluence of the Namhan River and Seom River where deposition occurs predominantly after the "Four Major Rivers Restoration Project." The characteristic of the junction is that the tributary of Seom River joined into the curved channel of the main reach of the Namhan River. The CCHE2D model analyzes the non-equilibrium sediment transport, and the adaptation lengths for the bed load and suspended load are important variables in the model. At the target area, the adaptation length for the bed load showed the greatest influence on the river bed change. Numerical simulation results demonstrated that the discharge ratio ($Q_r$) change affected the flow and bed change in the Namhan River and Seom river junction. When $Q_r{\leq}2.5$, the flow velocity of the main reach increased before confluence, thereby reducing the flow separation zone and decreasing the deposition inside the junction. When $Q_r$>2.5, there was a high possibility that deposition would be increased, thereby forming sand bar. Numerical simulation showed that a fixed sand bar has been formed at the junction due to the change of discharge ratio, which occurred in 2013.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.

• Clean Technology
• /
• v.25 no.3
• /
• pp.189-197
• /
• 2019

In this study an optimization of the preparation conditions of activated carbon with a ternary metal ion material to treat $H_2S$, which is classified as a representative odor substance, was carried out. For a metal ion material for enhancing the adsorption performance of hydrogen sulfide, performance enhancement was confirmed by combining Li and Fe or a ternary combination (K, Li, Fe) based on KI, which is a substance promoting hydrogen sulfide adsorption performance. Also, it was determined by XRD analysis that the reaction of each active substance with $H_2S$ was because of binding. The adsorption performance increased more than 3 times with heat treatment of the adsorbent with nitrogen compared with heat treatment with air. The maximum adsorption constant ($q_m$) value of the optimum adsorbent was 97.07, which is 6 times higher than that of the existing K-based impregnated activated carbon. It was confirmed that the objective adsorption amount ($0.3g\;g^{-1}$) was secured by an equilibrium between the mass transfer rate and adsorption rate. From the results, it was confirmed that the performance improvement was noticeable even when activated carbon with a reagent grade activated carbon particle size was modified. It was confirmed that the adsorption performance exists at high relative humidity levels of 60 and 100%, and the optimized preparation can be applied to a wet process such as a scrubber downstream.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8
• /
• pp.1104-1111
• /
• 2019

Objective: The aim of this study was to detect single nucleotide polymorphisms (SNP) of G protein-coupled receptor 54 (GPR54) gene and explore association of this candidate gene with reproductive traits in Jiaxing Black sows. Methods: Six pairs of primers of the gene were designed to amplify all exons thus sequences of which were detected by means of direct sequencing and then SNP loci were scanned. The effects of SNPs on total number of piglets born (TNB), number of piglets born alive (NBA), number of still born piglets (NSB), and litter weight at birth (LWB) of Jiaxing Black sows were analyzed. Results: Three SNP loci, including T3739C, C3878T and T6789C, were identified via comparison of sequencing and two genotypes (AB, BB) at each SNP site were observed. T3739C resulted in the change of amino acid ($Leu{\rightarrow}Pro$) in corresponding protein, and C3878T resulted in synonymous mutation ($Ile{\rightarrow}Ile$). Statistical results demonstrated that allele B was the preponderant allele at the three SNP loci and Genotype BB was the preponderant genotype. Meanwhile, Chi-Square test of these three SNPs indicated that all mutation sites fitted in Hardy-Weinberg equilibrium (p>0.05). For GPR54-T3739C locus, Jiaxing Black sows with genotype BB had 1.23 TNB and 1.28 NBA (p<0.01) that were more than those with genotype AB, respectively. Jiaxing Black sows that had the first two parities with genotype BB had additional 2.23 TNB, 2.27 NBA (p<0.01), and 1.94 LWB (p<0.05) compared to those with genotype AB, respectively. However, for other two loci, no significant difference was found between TNB, NBA, NSB, and LWB, and different genotypes of Jiaxing Black sows. Conclusion: In conclusion, the polymorphisms of GPR54-T3739C locus were significantly associated to TNB, NBA, and LWB and could be used as a potential genetic marker to improve reproductive function of Jiaxing black sows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.949-955
• /
• 2019

Objective: The present study was to investigate the association of polymorphisms in exon-9 of the bone morphogenetic protein receptor-1B (BMPR-1B) gene (C864T) with litter size in 240 Dorset, 232 Mongolian, and 124 Small Tail Han ewes. Methods: Blood samples were collected from 596 ewes and genomic DNA was extracted using the phenol: chloroform extraction method. The 304-bp amplified polymerase chain reaction product was analyzed for polymorphism by single-strand conformation polymorphism method. The genotypic frequency and allele frequency of BMPR-1B gene exon-9 were computed after sequence alignment. The ${\chi}^2$ independence test was used to analyze the association of genotypic frequency and litter size traits with in each ewe breed, where the phenotype was directly treated as category. Results: The results indicated two different banding patterns AA and AB for this fragment, with the most frequent genotype and allele of AA and A. Calculated Chi-square test for BMPR-1B gene exon-9 was found to be more than that of p value at the 5% level of significance, indicating that the population under study was in Hardy-Weinberg equilibrium for all ewes. The ${\chi}^2$ independence test analyses indicated litter size differences between genotypes was not the same for each breed. The 304-bp nucleotide sequence was subjected to BLAST analysis, and the C864T mutation significantly affected litter size in singletons, twins and multiples. The heterozygosity in exon-9 of BMPR-1B gene could increase litter size for all the studied ewes. Conclusion: Consequently, it appears that the polymorphism BMPR-1B gene exon-9 detected in this study may have potential use in marker assisted selection for litter size in Dorset, Mongolian, and Small Tail Han ewes.

• (The)Study of the Eastern Classic
• /
• no.54
• /
• pp.45-76
• /
• 2014

The purpose of this paper is to examine Toegye(退溪 李滉, 1501~1570)'s interpretation of Chungyong(中庸) who led the completion of the $Chos{\breve{o}}n$-style acceptance of Neo-Confucianism. This paper is focused on revealing the way that how he understood it according to the system of Neo-Confucianism that was proposed by Chu Hsi, rather than revealing the unique perspective of Toegye. I have the following configuration in this paper. First, I have set two directions of research for understanding of Chungyong, these were derived through the work that is an overview of cases of interpretation of Chungyong of $Chos{\breve{o}}n$. 1) How to understand the overall structure of Chungyong? 2) How to understand key concepts of Chungyong? Next, basing on these directions of research, I analyzed Toegye's interpretation of Chungyong. To grasp the structure of the whole, Toegye followed the segmentation system and structure of Chungyong changgu: Commentary on the Doctrine of the Mean, and to understand key concepts of Chungyong, he conducted in collaboration with concepts of Neo-Confucianism. Concretely, I analyze his work : Chungyong $suk{\breve{u}}i$(中庸釋義) and Chungyong $jil{\breve{u}}i$(中庸質疑) for asserting that he accepted the segmentation system and structure of Chungyong changgu. And I analyze his documents: letters to and from his disciples. This analysis focus on concepts of Chungyong for asserting that his understanding is in the context of Chu Hsi and other Neo-Confucian scholars's commentary. Toegye tried to reduce the diversity of interpretation and present one meaning.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.40-48
• /
• 2021

BACKGROUND: Although the calcined oyster shell can be used as a calcium-rich adsorbent for phosphate removal, information about it is limited. The purpose of this study was to evaluate the phosphate adsorption characteristics and its mechanism using calcined oyster shells. METHODS AND RESULTS: In this study, calcined oyster shell (C-OS600) was prepared by calcining oyster shells (P-OS) at 600℃ for 20 min. Phosphate adsorption by C-OS600 was performed under various environmental conditions. Phosphate adsorption by C-OS600 occurred rapidly at the beginning of the reaction, and the time to reach equilibrium was less than 1 h. The optimal isotherm and kinetic models for predicting the adsorption of phosphate by C-OS600 were the Langmuir isotherm and pseudo-second order kinetic model, respectively, and the maximum adsorption capacity derived from the Langmuir isotherm was 68.0 mg/g. The adsorption properties of phosphate by C-OS600 were dominantly influenced by the initial pH and C-OS600 dose. In addition, SEM-EDS and FTIR analysis clearly showed a difference in C-OS600 before and after phosphate adsorption, which proved that phosphate was adsorbed on the surface of C-OS600. CONCLUSION: Overall, the calcined oyster shell can be considered as an useful and effective adsorbent to treat wastewater containing phosphate.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.46-55
• /
• 2022

The recycling of coated cemented carbide scraps is becoming increasingly significant for the recovery of rare metals. However, coatings consisting of Group IV and V transition metal nitrides are one of the challenging factors in obtaining high-purity materials. We investigated the structural, elastic, and mechanical properties of Group IV and V transition-metal nitrides (TiN, VN, ZrN, NbN, HfN, and TaN) using first-principle calculations. Convergence tests were performed to obtain reliable calculated results. The equilibrium structures of the nitrides were in good agreement with those of a previous study, indicating the reliability of the data. Group IV transition metal nitrides show a higher covalent bonding nature. Thus, they exhibit a higher degree of brittleness than that of Group V transition metal nitrides. In contrast, Group V transition metal nitrides show weaker resistance to shear loading and more ductile behavior than Group IV transition metal nitrides because of the metallic bonds characterized by valence electron concentration. The results of the crystal orbital Hamilton population analysis showed good agreement with the shear resistance tendencies of all transition metal nitrides.

• Journal of the Korean Chemical Society
• /
• v.67 no.1
• /
• pp.54-63
• /
• 2023

In this study, six types of 2015 revised curriculum ChemistryII textbooks were analyzed for conditions, definitions, whether or not critical points were displayed, and real-life examples of phase diagram. In this study, it was confirmed that the problems pointed out in several previous studies were not reflected in the 2015 revised curriculum ChemistryII textbook. The same as the situation defining the phase diagram, the translation of the phase diagram into a phase equilibrium diagram, the distinction between phase and state being unclear, the critical point not being shown in the phase diagram, real life examples are very limited what is being presented as is suggested as a problem. Therefore, it is necessary to reflect the results of various previous studies in the revised curriculum ChemistryII textbook that will be made in the future, specify the conditions under which the phase diagram is drawn, newly model the situation defining the phase diagram, and translate the phase diagram as a 'phase diagram'. It is necessary to use the term, clarify the distinction between phase and state, mark the critical point in the phase diagram, and develop various real-life examples.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.85-94
• /
• 2022

Purpose : This study aimed to investigate the effects of 12 weeks of resistance exercise on body composition, physical strength, blood lipids, and insulin. Methods : The study was conducted on 24 elderly women divided into two groups: 12 subjects in an exercise group and 12 subjects in a control group. Resistance exercise was performed for 50 minutes a day, three times a week, for the duration of 12 weeks, and body composition, physical strength, blood lipids, and insulin were measured before and after the subjects completed the program. For the statistical analysis, the mean and standard deviation (M±SD) of each variable were calculated using SPSS version 20, and a paired t-test and two-way repeated ANOVA were conducted to test for the differences before and after the resistance exercise. All significant levels were set to α=.05 as a result of the experiment. Results : Changes in body composition after the 12-week resistance exercise program did not show any significant difference based on the comparison between the groups, but when noting the values for body fat percentage and body in the control group before and after, a significant difference was shown in fat mass (p<.05). As for changes in physical fitness, significant differences appeared in flexibility, muscle strength, and stenotic force (p<.01) when the groups were compared. Regarding pre- and post-values within each group concerning flexibility within the exercise group, significant differences were shown in gender (p<.001), muscle strength (p<.05), (p<.01), muscle earth strength, equilibrium (p<.01), stenosis force, and cardiopulmonary earth force (p<.001). Also, comparisons between populations in changes in blood lipids the values before and after in each group, significant differences in glucose (p<.05) and insulin (p<.05) were shown in the exercise group. When comparing the values before and after in each population, a significant difference was shown in the control group (p<.05). Conclusion : When all the results were integrated, the 12-week resistance exercise program was found to enhance physical strength (flexibility, muscle strength, and coordination) and improve the blood sugar levels of elderly women. In particular, resistance exercise is believed to lower the prevalence of obesity, type 2 diabetes mellitus, and metabolic diseases by having a positive effect on insulin. Further studies are suggested to verify the effect on body composition and blood lipids by setting up a variety of exercise treatment methods (including subjects, exercise periods, exercise plans, and exercise intensity focuses).