• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.313-318
• /
• 2013

Magnetic abrasive polishing is an advanced deburring process for nonmagnetic materials and micropattern products that have non-machinability characteristics. Despite these advantages, there are some problems with using MAP for deburring. MAP has introduced geometric errors into microgrooves because of an over-cutting force caused by uncontrolled magnetic abrasives in the MAP tool. Thus, in this study, to solve this problem, an EP (electrolyte polishing)-MAP hybrid polishing process was developed for deburring microgrooves in an STS316 material. In addition, an evaluation of EP-MAP for the deburring of microgrooves was carried out by profiling the burrs. The results of the experiment showed geometric errors after the deburring process using MAP. However, in the case of EP-MAP, no geometric error was observed after the process because of the lower material removal rate in EP-MAP.

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.64-68
• /
• 2000

The immunopotentiating effects of the polysaccharides, both intracellular and extracellular, was examined by an animal feeding test. The results are summarized as follows. The oral administration of intracellular and extracellular polysaccharides of Agrocybe cylindracea for 10 days resulted in the enhanced phagocytic activity of peritoneal exudate cells(PEC), spleen cells(SC), and monolymphocytes(ML). In the experiment of PFC(plaque forming cell) and RFC(rosette forming cell), the results showed that all the polysaccharide fractions enhanced the immune related cells. The EAC II group(the extracellular polysaccharide of Agrocybe cylindracea 10 mg/0.2 ml distilled water/day/ mouse) increased the PFC and RFC by 46~50% and 43%, respectively, compared to the control group. On the other hand, the IAC I group(the intracellular polysaccharide of Agrocybe cylindracea 1 mg/0.2 ml distilled water/day/mouse) increased the PFC and RFC by 49~70% and 91%, respectively. In terms of the mitogenic activity, the extracellular polysaccharides of A. cylindracea showed a higher activity than the intracellular polysaccharides.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.36-42
• /
• 2017

BACKGROUND: Yuza seed by-product has been produced in a large amount from the agricultural farms in the southern area of Korea. It has been mostly abandoned after commercial process for the production of juice, jam and tea. The study on the reuse of the yuza seed by-product has received much attention as a bio-resource material for the production of active compound in agriculture. METHODS AND RESULTS: Insecticidal rhamnolipid-producing Pseudomonas sp. EP-3 was grown in mineral salt media with the yuza seed by-product at 2, 20, 50 and 100 g/L. The growth of EP-3 was accompanied by a increase in insecticidal activity against green peach aphid. The highest insecticidal activity was observed when EP-3 was grown in the medium containing 50 g/L of the seed sample, producing approximately 996 mg/L of rhamnolipid at 96 h. Palmitic acid, stearic acid, oleic acid and linoleic acid were determined as the major fatty acids of the seed sample. The EP-3 cultures grown on the fatty acid mixture extracted from the seed sample showed a aphid mortality similar to that of cultures grown on the seed sample. The EP-3 cultures grown on 50 g/L of the seed sample showed aphid mortality more than 90% under greenhouse conditions. CONCLUSION: This study suggested that the yuza seed by-product may be used as a renewable material for microbial production of rhamnolipid against green peach aphid.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.3
• /
• pp.282-286
• /
• 2013

This study was conducted to compare extruded pellets (EP) and soft extruded pellets (SEP) with a raw fish-based moist pellet (MP) diet on the growth and flesh quality of Korean rockfish Sebastes schlegeli. Three groups of 20,000 fish (initial mean weight 133 g) per net-cage ($6{\times}12{\times}7m$) were fed commercial EP, SEP or MP for 16 months. The survival of fish fed SEP was higher than those of fish fed EP or MP. The highest growth performances were observed in the mean weight gain, total weight gain, and feed efficiency of fish fed MP, followed by those fed EP and SEP. Among the fish fed on extruded pellets, the total weight gain of fish fed SEP was higher than that of those fed EP, while fish fed EP grew faster than those fed SEP. No notable differences in body composition, sensory scores or textural properties of the dorsal muscle were observed in fish fed on EP, SEP or MP. Thus, it is suggested that extruded pellets, rather than raw fish-based moist pellets, could be fed to Korean rockfish without compromising flesh quality.

• Kyungpook Mathematical Journal
• /
• v.32 no.1
• /
• pp.103-110
• /
• 1992

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.4
• /
• pp.331-337
• /
• 2009

Background: The whole-blood interferon-gamma release assay (QuantiFERON-TB Gold [QFT-G]: Cellestis, Carnegie, Victoria, Australia) has been studied primarily for the use of diagnosing active pulmonary tuberculosis (TB) or latent TB. In the present study, the usefulness of QFT-G was evaluated for the diagnosis of extra-pulmonary tuberculosis (EP-TB). Methods: From June 2006 to February 2009, we evaluated the usefulness of QFT-G in patients (n=65) suspected with EP-TB, retrospectively. The diagnostic sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of the QFT-G assay were analyzed. Results: EP-TB was diagnosed in 33 (51%) participants. The overall sensitivity, specificity, PPV, and NPV of the QFT-G assay for EP-TB were 78%, 79%, 81%, and 77%, respectively. Of the 33 with EP-TB, 14 (42%) were diagnosed with TB pleurisy, 7 (21%) with TB lymphadenitis, 7 (21%) with intestinal TB, and 5 (15%) with EP-TB in other sites. In subgroup analyses according by site of infection, the QFT-G showed 86% sensitivity, 64% specificity, and 78% NPV in TB pleurisy. On the other hand, the sensitivity, specificity, and NPV of the assay were 71%, 83% and 71%, respectively in TB lymphadenitis, and 86%, 100% and 88%, respectively in intestinal TB. Among the patients with suspected alternative site EP-TB, the sensitivity, specificity, and NPV of the assay were 50%, 80% and 67%, respectively. Conclusion: The QFT-G assay showed moderate diagnostic accuracy in EP-TB. However, negative QFT-G assay does not exclude EP-TB because of the low NPV of this assay.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.510-518
• /
• 2016

Ethyl cellulose-g-poly(ethylene glycol) (EP) was synthesized by esterification of carboxylic acid functionalized methoxy polyethylene glycol (MPEG-COOH) with ethyl cellulose (EC) in order to develop a hydrophilic substrate for thin-film composite (TFC) membrane in a forward osmosis (FO) system. A porous EP substrate, fabricated by a non-solvent induced phase separation method, was found to be more hydrophilic than the EC substrate due to the presence of polyethylene glycol (PEG) side chains in the EP. Since the EP substrate exhibits smaller water contact angles and higher porosity, the structural parameter (S) of TFC-EP is smaller than that of TFC-EC, indicating that internal concentration polarization (ICP) within porous substrates can occur less when TFC-EP is used as a membrane. For example, the water flux value of the TFC-EP is 15.7 LMH, whereas the water flux value of the TFC-EC is only 6.6 LMH. Therefore, we strongly believe that the TFC-EP could be a promising candidate with good FO performances.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.197-204
• /
• 2016

The objective of this work was to investigate the performance of pervaporation process for recovery of ester compounds from model aqueous solutions and how the fluxes of esters and water were affected by changes in feed concentration and temperature. The flux of ethyl acetate (EA), propyl acetate (PA), ethyl propionate (EP), butyl acetate (BA), and ethyl butyrate (EB) increased with an increase in feed concentration from 0.15 wt% to 0.60 wt%, and increased with temperature change from $30^{\circ}C$ to $50^{\circ}C$. The flux of esters (EA, PA, EP, BA, and EB) was in order of (EA) < (PA, EP) < (BA, EB). This result meant that the flux strongly depended on affinity between esters and membrane surface; EA is the least hydrophobic because it has one hydrophobic function group ($-CH_2-$), (PA, EP) have two ($-CH_2-$), and (BA, EB) are the most hydrophobic because these have three ($-CH_2-$). As well as such an influence of hydrophobicity of ester molecules on ester flux, the influence of hydrophobicity of membrane surface on ester flux needs further investigation. With increase in temperature, water flux of aqueous EA, PA, EP, BA, and EB solution increased. However, water flux of aqueous ester solutions did not change appreciably with increase in concentration. This experimental results may be used as fundamental data for pervaporation (PV) to improve the aroma recovery process as an alternative to thermal evaporation and distillation processes.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.24.1-24.1
• /
• 2008

We examine the eccentricity parameter (EP) of Coronal Mass Ejections (CMEs). For this, we select 298 front-side CMEs from SOHO LASCO CMEs whose speed is larger than 1000km/s and angular width is greater than $120^{\circ}$ during from 1997 to 2007. These are thought to be the most plausible candidate of geoeffective CMEs. We examine the relation between CMEs eccentricity parameter and the minimum value of the Dst index. We find that strong geomagnetic storms (Dst < -200nT) are well correlated with the EP from the scattered plot. We also find that CMEs have high geoeffectiveness when they occurred near the center of the solar disk with the small EP and they have the small speed with the small EP. These results indicate that the CME EP also can be an important indicator to forecast CME geoeffectiveness such as Earthward direction parameter (Moon et al. 2005, Kim et al. 2008).

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1995

Anisotropic pitch-based C-type and hollow carbon fibers can obtain wider shear stresses during the spinning and induce higher molecular orientation than that of round along the fiber axis. These fibers reinforced unidirectional epoxy composites were prepared by hot-press moulding method and perpendicular and parallel thermal conductivities of the composites were measured by a steady-state meth od. In the case of round carbon fibers reinforced epoxy composites(H-CF/EP), thermal anisotropic factor showed nearly 50, while those of H-CF/EP and C-CF/EP showed about 130 and 118, respectively. As a result, both H-CF/EP and C-CF/EP had an excellent directional thermal conductivity to distribute heat, above 200 %.