• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.493-495
• /
• 2007

In this study, the acrylamide contents of foods were estimated via liquid chromatography (LC)/mass spectrometry (MS)/MS after the food matrix constituents had been degraded with digestive enzymes (i.e., pepsin and pancreatin) and extracted with water. The quantities of acrylamide released from samples of cereal, potato chips, peanuts, and coffee were $62{\pm}5.1,\;970,\;106{\pm}20$, and 890 ppb, respectively. No acrylamide was detected in samples of soybean curd (tofu), fish cake, and ham. Compared to the amounts of acrylamide detected after extraction with water only, we noted no significant differences in the soybean curd, fish cake, potato chip, ham, and coffee samples. However, the quantities of acrylamide released from the cereal and peanut samples were approximately 2-fold larger following pretreatment with the digestive enzymes. This study presents a new in vitro enzymatic digestion method which allows for a more accurate estimation of the acrylamide contents of foods.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1116-1123
• /
• 2020

Velvet antler (VA) is a historically traditional medicinal supplement and is well known in Asian countries for its pharmaceutical and health benefits. The objectives for this study were to optimize the hot water extraction (HWE) of VA for the Korean VA industry, and to determine the most effective pretreatment method among microwave (MW), ultrasonication (US), and enzymatic (EZ) techniques. Using response surface methodology, optimum extraction temperatures and times were determined by central composite design configuration based on extraction yield and sialic acid content. Various quality parameters of VA extract including yield, soluble solid, protein, and sialic acid contents were also compared with the conjunction of HWE and pretreatment. The yield and sialic acid content of VA extract were determined to be 40% and 0.73 mg/g, respectively, under an optimum temperature of 100℃ at 24 h of extraction time. The yields from VA extracts pretreated with MW, US, and EZ were 17.42%, 19.73%, and 29.15%, respectively. Among the tested commercial enzymes, pepsin was the most effective proteolytic enzyme and led to the highest yield (47.65%), soluble solids (4.03 °brix), protein (1.12 mg/ml), and sialic acid (3.04 mg/ml) contents from VA extract.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.79-83
• /
• 1999

The objective of this research was to characterize viscosity of sea tangle extract isolated from sea tangles in Korea to obtain basic data for production of dietary fiber materials with new functional properties. The viscosity of sea tangle extract was increased as the the extraction time increased. However, these values increased significantly up to 1 hour of extraction time and then slow increased in case of hot water extraction and enzymatic hydrolyzed sea tangle extract. As for addition of sugar and salts, the values of viscosity of sea tangle extract was very low in the addition of EDTA-2Na regardless of concentration. But in case of sucrose and NaCl, the viscosity of sea tangle extract were tended to decreased up to 2.5% concentration.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.928-934
• /
• 2007

Physiochemical properties, such as yield and molecular weight distribution of polysaccharide fractions, of polysaccharides in the enzymatic hydrolysates of purslane were investigated and characterized. A higher amount of micro nutrients, such as potassium (9,413 mg/100 g), phosphorus acid (539 mg/100 g), leucine, alanine, lysine, valine, glycine, and isoleucine, was present in whole purslane. The yield of water soluble polysaccharides (WSP) was 0.29, 7.01, and 7.94% when extracted using room temperature water (RTW), hot-water (HW), and hot temperature/high pressure-water (HTPW), respectively, indicating that HW or HTPW extraction may be effective to obtain WSP from purslane. The average ratio of L-arabinose:D-galactose in the WSP was 37:49, 34:37, and 27:29, when extracted using RTW, HW, and HTPW, respectively. These results indicate that water was a suitable extraction solvent for preparation of the arabinogalactan component of whole purslane. A higher yield and total carbohydrate content was obtained by using Viscozyme L instead of Pectinex 5XL during extraction of the WSP, which indicates that enzymatic treatment of purslane may be an effective method to control the Mw of polysaccharides. Finally, it was confirmed that Viscozyme L is a suitable enzyme for the hydrolysis and separation of polysaccharides obtained from purslane.

• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.291-295
• /
• 2020

In order to increase the utilization of defatted sesame meal (DSM), a by-product of sesame oil production, the conditions of extraction of insoluble proteins from DSM by enzyme treatment were investigated. As a result of comparing the treatment results of proteolytic enzymes Alcalase, Flavorzyme, Neutrase, and Protamex with control, Protamex was effective in increasing the total solid and protein content. At the reaction conditions of Protamex (50 ℃, pH 6.0), the dosage of enzymes was appropriate for 1% of DSM and 3 h of enzyme reaction time. To improve the efficiency of enzymatic treatment, the protein content extracted increased as the heat treatment temperature increased, and slightly increased above 110 ℃. As a result of investigating the effect of the combination treatment of cell lytic enzyme (Tunicase) and protease (Protamex) on protein solubilization, it was most effective to treat the cell lytic enzyme after processing the protease. After heat treatment (110 ℃, 10 min), sequential treatment of Protamex and Tunicase increased the protein content by about 3.5 times (9.85→35.58 mg/mL) of the non-heated control and 2.2 times (15.83→35.58 mg/mL) of the heat treated control.

• Journal of Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.132-135
• /
• 2007

An efficient production method of chlorella extract was developed by enzymatic treatment using cell lytic and proteolytic enzymes. The suitable dosage of Tunicase, a cell lytic enzyme, was found to be 1.0% (w/w). Proteolytic enzymes were screened to obtain high chlorella growth factor (CGF) index, which indicates crude CGF content and solid recovery. Among the seven tested proteases, Esperase, whose optimal dosage was 1.0% (w/w), was selected. By co-treatment using optimal dosages of Tunicase and Esperase, the highest CGF index and solid recovery were obtained. The CGF index and solid recovery of co-treatment were remarkably enhanced by 250 ($4.36{\rightarrow}15.21$) and 220% ($12.65%{\rightarrow}40.15%$), respectively, than those of the non-treated extracts.

• Journal of Life Science
• /
• v.10 no.2
• /
• pp.131-139
• /
• 2000

Lecithin-free egg yolk protein (EYP), the by-product of lecithin extraction from egg yolk, which is denatured with an organic solvent, would normally be discarded. In this study, the denatured protein was renatured with alkali, and hydrolyzed with Alcalase in order to utilize by-product. The hydrolysate was separated through a series of ultrafiltration membranes with molecular weight cut-off (MWOO) of 10, 5 and 1 kDa, and the antioxidative activities of the hydrolysates was investigated. The 5K hydrolysate, permeate from 5 kDa membrane, showed stronger antioxidative activity than 10 K and 1 K hydrolysate which were permeated from 10 kDa and 1 kDa membrane, in a linoleic acid autoxidation system. In addition, the optimum concentration of antioxidative activity for 5 K hydrolysate was 1%, and the activity was about 37% higher as compared with α-tocopherol. The synergistic effect was also increased by using the hydrolysates with α-tocopherol.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.348-355
• /
• 2019

This study investigated the impact of cellulase treatment on the extraction yield of potato starch (PS), and compared the physicochemical properties of PS by conventional (CSE) and enzymatic (ESE) starch extraction. In ESE, the PS extraction yield was predominantly influenced by reaction temperature, time and their interaction, compared to the cellulase concentration. When potatoes were treated for 8 h at $40^{\circ}C$ with 1.5% cellulase, the PS extraction yield was about 3.4-fold higher than that by CSE. Compared to CSE-PS, ESE-PS showed lower total starch contents and higher amylose contents, resulting in lower swelling factors and distorted pasting viscosity profiles accompanied by absence of peak and breakdown viscosities. However, ESE did not affect the gelatinization characteristics of PS. Overall results suggested that ESE can provide the highest yield of PS, and ESE-PS can be a potential starch source for extending the utilization of PS in food industries.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.903-908
• /
• 2006

Various extraction procedures were investigated using reference materials and samples to evaluate extraction efficiency and effectiveness. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure total arsenic and to quantitate arsenic species when coupled to an HPLC (high pressure liquid chromatography). Arsenic species were extracted from rice flour (NIST SRM 1568a) with water/methanol mixtures using accelerated solvent extraction (ASE). Total arsenic extraction efficiency ranged from 42 to 64%, for water and various methanol concentrations. From spinach (NIST SRM 1570), freeze-dried apple, and rice flour (NIST SRM 1568a), arsenic species were extracted with trifluoroacetic acid (TFA) at 100 ${^{\circ}C}$. Total arsenic extraction efficiency was 90% for spinach, 75% for freeze-dried apple, and 83% for rice flour. Enzymatic extraction with alpha-amylase and sonication resulted in extraction efficiency of 104% for rice flour, 98% for freeze-dried apple, and 7% for spinach. Chromatograms of arsenic species extracted by the optimum extraction methods were obtained, and the species were quantified. Arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) were found in the apple sample, and DMA and As(V) in the rice flour sample. As(V) and MMA were found in three herbal dietary supplement samples.