• KIEAE Journal
• /
• 제4권2호
• /
• pp.19-27
• /
• 2004

The importance of Building Remodeling as a means to create an architectural environment capable of responding to the social, economic changes has increased more than ever. And it has become necessary to consider Environmental performance in Building remodeling. Consideration of converting buildings into Environment-Friendly Remodeling of Office Buildings makes more and more increased in our construction compatibility. This Study is intended to increase the designer' recognition of Environmental Performance Improvement in the feasibility analysis and schematic design of Office Building Remodeling and to provide Planning Data and Guidance. In this context, this study is focused on the "planning Guidance for Environmental Friendly Remodeling". Through this study, the flow of Environmental Design and Construction is elevated reaching the level in developed country.

• 한국토양비료학회지
• /
• 제44권6호
• /
• pp.1264-1271
• /
• 2011

To build environmentally friendly highways, we testes suitability for unique characteristics of pollution mitigation facility around the highways by evaluating optimal selections and implementation methodologies to minimize loan of non-point pollution substances into water-ways. To do this we categorized EIA target highways into three types ; big drainage basin, small drainage basin, and bridge section as to minimize non-point pollution of highway runoff. The terms of selected facility test based on the Natural and Manufactured Treatment Device were removal efficiency of TSS, BOD, COD, T-N, T-P, compatibility of site selection, economic feasibility, maintenance convenience, and the final mitigation facility.

• 한국의류학회지
• /
• 제27권7호
• /
• pp.862-871
• /
• 2003

Kenaf has been estimated as an economic and environmentally compatible crop. This study purposed to enlarge the use of kenaf as textile materials and to develope high value-added textile fibers. Kenaf has been cultivated successfully and grown fast in Jeju. The height of kenaf stalks was about 220cm at 105 DAP and 400cm at 150 DAP, After harvesting at 105 DAP and seperating the basts from harvested kenaf stalks, decorticated kenaf basts were rotted in water at 15~$25^{\circ}C$ for biological rotting and were treated with 1%, 4% and 7% NaOH at 9$0^{\circ}C$ for chemical retting. The properties of extracted fibers were compared: such as fiber diameter. Transversal and longitudinal views, colors, crystallinities, strengths and elongations etc. The diameter of kenaf bast fibers was 15~25 ${\mu}{\textrm}{m}$. Biologically rotted kenaf bast fibers had well developed lumens which were diminished after chemical retting. The degree of crystallinities of biologically rotted kenaf bast fiber was about 92~96% showed higher than those of chemically rotting. The biologically rotted fibers were bright and had creamy color. Yelloweness increased at chemically rotted fibers. Fiber bundle strengths were from maximum 98076.9 (gf/g) to minimum 63749.5 (gf/g). Fiber bundle strengths of biologically rotted kenaf fibers appeared greater than those of chemically rotted fibers. Alkali treatments of chemical rotting could make strength lower and elongation higher. Rotting method might be one of the most importance factors affecting to final fiber properties.

• 환경영향평가
• /
• 제20권6호
• /
• pp.857-866
• /
• 2011

This research categorized EIA target highways into following three types in order to minimize non-point source pollution from highway runoff. 1. Big drainage basin. 2. Small drainage basin. 3. Bridge section. The Natural, Filter and Swirl-Type devices were evaluated in terms of removal efficiency of TSS, BOD, COD, T-N, T-P, compatibility of site selection, economic feasibility, and maintenance convenience through which the final BMP was selected. According to the removal efficiency result, the area of Big and Small Drainage basin and bridge section had higher removal efficiency with natural facility than that of the Filter or Swirl-Type device. To make appropriate selection of highways'BMP for non-point source pollution, this study will aim to contribute to building more environmentally friendly highways by proposing the selection process that is made of 5 stages. 1. Selecting the target drainage basin. 2. Selecting the land for the mitigation facility. 3. Analysing the ease of maintenance. 4. Technically evaluating each installation. 5. Evaluating the effective implementation methods.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.446-456
• /
• 2008

A recent theoretical approach based on the coupling of both the Flory-Huggins (FH) and the Association Equilibria thermodynamic (AET) theories was modified and adapted to study the miscibility properties of a multi-component system formed by two polymers (a proton-donor and a proton-acceptor) and a proton-acceptor solvent, named copolymer(A)/solvent(B)/polymer(C). Compatibility between polymers was mainly attained by hydrogen-bonding between the hydroxyl group on the phenol unit of the poly(styrene-co-vinyl phenol) (PSVPh) and the carbonyl group of the biodegradable and environmentally friendly poly(3-hydroxybutyrate) (PHB). However, the self-association of PSVPh and specific interactions between the PSVPh and the H-acceptor group (an ether oxygen atom) of the epichlorohydrin (ECH) solvent were also established in a lower extension, which competed with the polymer-polymer association. All the binary specific interactions and their dependence with the system composition as well as with the copolymer content were evaluated and quantified by means of two excess functions of the Gibbs tree energy, ${\Delta}g_{AB}$ and ${\Delta}g_{AC}$. Experimental results from fluorescence spectroscopy were consistent with the theoretical simulations derived with the model, which could also be applied and extended to predict the miscibility in solution of any polymer blend with specific interactions.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.36-43
• /
• 2013

Effects of blending of PCC manufactured with emission gas occurred at mill on the characteristics of coating color, optical and printing properties of coated paper were investigated in order to evaluate the possibility of its use as a raw material for producing environmentally friendly coated paper. Low shear viscosity and water retention value of ground PCC 1(d50 = $6.303{\mu}m$) were higher than those of ground PCC 2(d50 = $3.149{\mu}m$). Ink set properties of ground PCC 1 and ground PCC 2 were inferior to that of PCC 3. Thus, the reducing of particle size was required in order to overcome the inferior ink set properties. Ground PCC 1 had a similar properties to clay, and it showed the possibility that ground PCC 1 could be used to produce matte grade coated papers. However, it was required to improve the stability(particle shape, particle size, and compatibility with chemicals used in coating color formulation) in the case of blending with GCC in order to keep the qualities of coated paper.

• 한국콘텐츠학회논문지
• /
• 제5권4호
• /
• pp.62-70
• /
• 2005

1992년의 리우선언(Rio Earth Charter) 이후 세계 각국의 환경정책은 많은 변화가 있었다. 즉 자연과 인간, 환경보전과 개발의 양립을 목표로 과거의 '직접 규제'와 '사후 대응' 위주의 정책에서 '지속가능한 발전'의 목표 아래, 지구 온난화 현상과 같은 전세계적 환경문제를 해결하기 위해 경제적 유인수단 등과 같은 다양한 정책수단들이 개발되고, 환경친화적 생산공정과 효율적인 자원이용, 폐기물발생의 최소화 등 '사전 예방적 환경정책'으로 발전해 가고 있는 것이다. 오늘날 날로 심각해지는 환경문제는 이제 우리 인류의 생존을 위협하기 시작하였고, 환경문제는 한 국가차원을 넘어 전지구적 차원에서 해결 노력을 경주하여야 한다. 본 연구는 이러한 문제인식에 근거하여 환경보호를 위한 각국의 환경영향평가제도를 입법과정을 중심으로 검토하여 우리 환경영향평가제도에의 시사점을 제시한다.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.139-146
• /
• 2020

Global warming has led to an increase in demand of eco-friendly vehicles, such as electric cars, for reducing greenhouse gas emissions, and especially, regulating carbon dioxide generation. In addition, electric vehicles are equipped with an electric drive-type hermetic scroll compressor and a refrigerant, which exhibit current and future trends of using environmentally friendly refrigerants, including R-1234yf. In this study, polyol ester-based refrigeration oils are prepared via condensation esterification of polyol and fatty acids. The oils can be combined with R-1234yf refrigerant for applications in air conditioning and cooling systems of electric vehicles. The structure of synthetic polyol esters is confirmed via ¹H-NMR and FT-IR spectrum analysis, and the composition of the polyol ester is analyzed via gas chromatogram analysis. Furthermore, kinematic viscosity, viscosity index, total acid value, pour point, and color are analyzed as fundamental physical properties of the synthetic polyol esters. The compatibility and chemical stability of the synthetic polyol ester combined with the R-1234yf refrigerant are obtained via high temperature and high pressure oil-resistant refrigerant tests. The changes in the oil color and catalyst activity are observed before and after the experiment to determine whether it is suitable as a refrigerator oil.

• 한국환경보건학회지
• /
• 제18권2호
• /
• pp.102-105
• /
• 1992

냉각탑, 제지산업, 일반 산업용수 등에 사용되는 산업용 방부제의 유효 성분 isothiazolinone components 즉, 2-methyl-4-isothiazolin-3-one(unchlorinated compound)과 5-chloro-2-methy14-isothiazolin-3-one(chlorinated compound)을 고성능액체크로마토그래피로서 분리, 정량하였다. 역상의 C$_{18}$ column (15 cmX3.9 mm I.D.)을 사용하였으며 자외선 검출기의 파장 254 nm에서 methanol-0.4% acetic acid(40 : 60)의 이동상, methanol-0.4% acetic acid(30: 70)의 추출 및 주입용매 조건으로 HPLC 분리를 시도한 결과 unchlorinated compound는 10~32,400 mg/l 범위에서, 그리고 chlorinated compound는 120~107,400 mg.l의 범위에서 직선성을 보였다. 내부 표준물질로서 dimethyl phthalate를 사용하였으며, unchlorinated compound, chlorinated compound 및 내부 표준물질의 순서로 븐리가 일어났고 총 분리시간은 6.41분이었다. 상기의 조건으로 시험물질을 분석, 정량한 결과 예측농도치에 근접한 수치를 얻었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.131-134
• /
• 2013

2012년부터 만5세 유아를 위한 교육과 보육의 공통과정인 누리과정이 시행 되고 있다. 누리과정을 운영하는데 있어 교육 로봇은 교사가 현장에서 활용하기 쉬울 뿐만 아니라, 유아의 심리적 안정, 신체적 안정, 연령에 따른 발달적 적합성, 다양성을 고려하면서 사고력, 창의력, 과학적 사고력을 키울 수 있는 교육 로봇이 필요하다. 본 논문에서는 유아들이 좋아하는 스마트폰 단말기를 통한 인터넷 서비스 및 애플리케이션을 연구한다. 영유아들이 환경 친화적인 교육 환경을 가지는 교육용 곤충 로봇 애플리케이션을 스마트폰에서의 개발하는 연구를 한다. 스마트폰으로 게임 활용은 15단계로 진전되며, 도중에 교육적 효과를 높이기 위한 질문과 답변을 배치하여 교육과 로봇의 창의적 효과를 높인다. 본 논문을 통해 창의적 누리교육을 위한 콘텐츠 발달에 기여할 것 이다.