• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.414-419
• /
• 2019

Objectives: The objective of this study was to evaluate the inhibitory effect of non-thermal dielectric barrier discharge (DBD) plasma by air volume against Mycobacterium tuberculosis (MTB). Methods: Plasma generators (TB-300, Shinyoung Airtec, Seongnam-si, Korea) were operated in a 2A type biosafety cabinet. The plasma generator was set to a wind flow rate of 14 ($80m^3/h$), 18 ($110m^3/h$), and 22 ($150m^3/h$), and exposure times were set to 0 hours, 3 hours, 6 hours, 9 hours, and 24 hours. Results: The inhibitory effects of plasma at air volume 14 with prolonged exposure time of three hours was 20%, 64% at six hours, 82.3% at nine hours, and 100% after 24 hours exposure. With air volume of 18, the inhibitory effects upon plasma exposure were 36% for three hours, and 100% from 24 hours. Greater air volume resulted in greater inhibition of tuberculosis bacterial growth. In particular, the maximum inhibitory effect (100%) was shown in air volume of 22 ($150m^3/h$) after three hours of plasma exposure. Conclusions: The results showed the correlating inhibitory effects of plasma on the growth of MTB in combination with increasing plasma exposure time and air volume.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.250-254
• /
• 1998

This paper shows how the environmental parameters(temperature, humidity) in the greenhouse are influenced by air movement produced by air circulation fans. When the fans were used, they could make indoor temperature and humidity homogenious, but there was no significant difference in the location and number of fans. When the fans were not used during the night time, there was no significant difference in the temperature and humidity, but the standard deviation was reduced by using the fans.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.110-116
• /
• 2016

Biogas yields point of view, the possibility of reusing excess sludge treated by thermal pretreatment for the purpose of improving the efficiency of the anaerobic digestion process has been investigated in recent year. Thermal pretreatment technology was considered as a pretreatment technique to improve excess sludge properties because of the solubilization of particulate organics. As a view point of sludge reduction and recycle, however, many researchers focused on the ability of particulate hydrolysis and COD solubilization under a high temperature, and few reports have addressed on the physical/chemical characteristics changing. This research was performed to evaluate the effects of a various temperature and chemical additives on carbon formation and fractionation in treated slurry from thermal pretreatment. Based on the results, it was revealed that oxidants injection and temperature changing have significantly caused the change of carbon fractions in slurry from thermal pretreament. Especially, it was considered that the efficiencies of particle hydrolysis increased with the increase of the reaction temperature. Low molecular weight(Mw < 350 g/mol) organic carbon formation increased with the increase of oxidants injection. It was expected that results of this research will provide an overview of the characteristics of thermal pretreatement for excess sludge reduction and recycle.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.37-51
• /
• 2013

An energy pile encases heat exchange pipes to exchange thermal energy with the surrounding ground formation by circulating working fluid through the pipes. An energy pile has many advantages in terms of economic feasibility and constructability over conventional Ground Heat Exchangers (GHEXs). In this paper, a coil-type PHC energy pile was constructed in a test bed and its thermal performance was experimentally and numerically evaluated to make a preliminary design. An in-situ thermal response test (TRT) was performed on the coil-type PHC energy pile and its results were compared with the solid cylinder source model presented by Man et al. (2010). In addition, a CFD numerical analysis using FLUNET was carried out to back-analyze the thermal conductivity of the ground formation from the Ttype PHC energy RT result. To study effects of a coil pitch of the coil-type heat exchange pipe, a thermal interference between the heat exchange pipes in PHC energy piles was parametrically studied by performing the CFD numerical analysis, then the effect of the coil pitch on thermal performance and efficiency of heat exchange were evaluated. Finally, an equivalent heat exchange efficiency factor for the coil-type PHC energy pile in comparison with a common multiple U-type PHC energy pile was obtained to facilitate a preliminary design method for the coil-type PHC energy pile by adopting the PILESIM2 program.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.15-29
• /
• 2021

Urban green spaces offer a variety of benefits to living things and humans. However, existing green spaces have been reduced and fragmented due to urbanization, and there is a limit to creating new large green spaces in densely developed cities. Street trees have fewer restrictions on land use, which can be a measure to secure green areas in cities. In Korea, excessive pruning is being done on some street trees for reasons such as blocking of building signboards, contact with electric wires, and restrictions on sidewalk widths. Therefore, it is necessary to quantitatively understand the relationship between the benefits provided by street trees and their structures to come up with an efficient and systematic planning and management plan for urban street trees. In this study, we quantitatively analyzed the relationship between the thermal comfort improvement by the shades of street trees and the vertical structure, planting environment, and types of street trees. To calculate the thermal comfort felt by human body, we calculated UTCI (Universal Thermal Climate Index) of each street tree. For the vertical structure of street trees, we used Terrestrial LiDAR and the point clouds of street tree's crown was sliced vertically at 1m intervals. We conducted a multiple regression analysis on the thermal comfort improvement using the variables we obtained from fields. As a result, in the case of a street tree's vertical structure, the lager the volume of tree's crown located 3-4m (β=0.298, p<.05) and 6-7m (β=0.568, p<.001) above clear length, the better the cooling effect. In addition, the thermal comfort improvement was assessed to decrease as the DBH increased (β=-0.435, p<.001). In general, the crown diameter and DBH are positively correlated, with a cooling effect occurring as crown diameter increases. In this study, the opposite result was obtained due to the small number of trees measured, so additional research is needed by increasing the number of tree samples. In the case of the planting environment, the effect of improving thermal comfort was higher in the shaded area of trees planted to the south (β=-0.541, p<.001). Since unsystematic management of street trees can deteriorate the function of them, quantitative evaluations of the vertical structure of street trees are required, which can provide specific measures for planning and management of urban street trees with thermal comfort effect.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.05a
• /
• pp.217-222
• /
• 1999

In this study an objection, to be needed at public works, is to develop a measurement circuit of a gauage using radioisotope for compaction control. The developed gauage consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and two circuits are provided for gamma-rays and thermal neutrons, respectively. Also, to minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.314-315
• /
• 2004

As environmental issue threatens to be aggravated, applications of bio-degradable plastic (Polybutylene Succinate:PBS) tend to be increased. However, improvement of mechanical characteristics of PBS is indispensable for further widespread actual applications. Therefore, in order to produce further functional P8S with improved mechanical characteristics, TiO$_2$ coatings on PBS substrate were prepared under various spraying conditions using plasma and HVOF spraying techniques. The effects of thermal spraying methods and spraying parameters on coating properties could be confirmed. Moreover, wear behavior for TiO$_2$ coatings on PBS substrate has been also reviewed and characterized.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.2
• /
• pp.95-101
• /
• 2007

The surface changes due to urban expansion and the increase of artificial heat releases have brought significant climate changes such as heat island phenomenon in urban area. Furthermore, these changes also have brought serious problems such as air temperature increase, wind changes, and air pollution in urban area. Comprehensive analytical technologies considering various effects are required to analyse complicated mechanism of climate changes, and review the efficient measures. In this research, the effect of the urban expansion in Tokyo and Bangkok area on urban environment will be discussed. By using CFD, urban development and the mechanism of global warming and wind change are studied in those two cities. As a result of numerical research, the surface changes of city could bring the environmental changes in urban area.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.811-814
• /
• 1997

An oxidative thermal regeneration process was developed and evaluated for its potential applicability in several environmental areas. The feasibility of the process is affected strongly by the gradual carbon loss, energy consumption, physical changes of carbon, and effective destruction efficiency of adsorbed materials during the regeneration. The aim of the study is to determine the optimum conditions to maintain acceptable destruction efficiency for adsorbed organics, controlling oxidant flow rate. Prior to its applications, various preliminary tests were carried out to determine the effects of experimental parameters on the process. The tests performed were reaction temperature, carbon loss, surface area, surface structure, and adsorptive property. The results of these tests show that the parameters are dependent on oxidant flow rate, and suggest that the process is comparable and, in some ways, possibly superior to conventional regeneration techniques because the oxidative process is a single step and less energy intensive.

• Toxicological Research
• /
• v.28 no.3
• /
• pp.151-157
• /
• 2012

This paper describes the effects of thermally oxidized tallow on the serum lipids profile and radical scavenging activity (RSA) of the lipids extracted from the different tissues of the rabbits. Tallow was thermally oxidized at $130^{\circ}C$ for 9, 18, 27, 36 and 45 h respectively. Thermally oxidized tallow was fed to the local strain of Himalayan rabbits for one week. Results show that oxidation increases the formation of hydroperoxides and decrease the level of radical scavenging activity of the tallow. The rabbit serum lipids profile showed a dose dependent increase in triglyceride, total cholesterol and LDL-cholesterol. However, no statistically significant increase was observed in the HDL-cholesterol with an increase of oxidation time. Serum glucose and rabbits body weight decrease significantly (p < 0.05) and was highly correlated with the serum lipids profile. The percent RSA of the lipids extracted from the liver, brain and muscles tissues showed a significant decrease with respect to 0.5, 1.0 and 1.5 g/body weight as well as oxidation time. Data suggests that thermal oxidation and use of thermally oxidized beef tallow is harmful and therefore an alternative way of cooking should be used.