• Title/Summary/Keyword: environmental test

Search Result 10,260, Processing Time 0.041 seconds

Review Newly Adopted OECD Acute Oral Toxicity Test Guideline 420 (OECD test guideline 420 고정용량 급성경구독성시험법에 대한 고찰)

  • 정용현;유일재
    • Toxicological Research
    • /
    • v.17 no.3
    • /
    • pp.195-201
    • /
    • 2001
  • The OECD acute toxicity guideline has been revised recently to protect animal welfare. The GLP authority of the Ministry of Environment, the National Institute for Environmental Research, recommended GLP laboratories in Korea to ufo the revised acute toxicity guideline. This study was carried out to optimize newly adopted OECD test guideline 420 (TG 420). Bisphenol A was selected for test chemical. Following TG420, Bisphenol A was classified as class 5/unclassified group. The revised TG 420 was very effective test in minimizing animal number and classifying chemicals. The method, however had short-coming in evaluation of test results statistically because the test had no control group, and the test should be stopped when animals were dead at the lowest dose or alive at the highest dose. TG 420 required at Least 20 animals to complete the test, but it could result in producing unused animals that need to sacrifice.

  • PDF

Reliability Assessment Criteria of Power Amplifier for Mobile Phone (휴대폰용 전력증폭기의 신뢰성 평가기준)

  • Lee, Woo-Sung;Hwang, Soon-Mi;Lee, Kwan-Hun;Song, Byeong-Suk;Jeong, Hai-Sung;Oh, Geun-Tae
    • Journal of Applied Reliability
    • /
    • v.9 no.3
    • /
    • pp.233-248
    • /
    • 2009
  • PAM(Power Amplifier Module) is the important part of a mobile phone transmitter. It amplifies the strength of signal transmitting from a mobile phone to base stations enough to resist noise or interference. In this paper reliability assessment criteria for the PAM are established in terms of quality certification test and lifetime test. The former quality certification test comprises general performance test and environmental test. Items which pass the test undergo lifetime test which guarantees the extent of mean lifetime with certain confidence.

  • PDF

Dynamic Test Results Assessment on the Optical Bench of LEO Satellite (저궤도 지구관측위성의 광학탑재체 지지구조물 동환경시험 결과분석)

  • Kim, Kyung-Won;Kim, Jin-Hee;Rhee, Ju-Hun;Kim, Sun-Won;Jin, Ik-Min;Park, Jong-Sung
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.242-245
    • /
    • 2006
  • This paper is an assessment on the dynamic test results of optical bench for LEO satellite. According to the design requirements, optical bench was designed and manufactured. Dynamic test was performed to verify stability of optical bench. Low level random vibration test, sine burst test and sine vibration test are carried out to identify dynamic characteristics and to verify static strength and safety under quasi-static load conditions. From the result it can be stated that the optical bench is well qualified under the launch environmental conditions.

  • PDF

Implementation of PXIe platform based portable Automatic Test Equipment to improve reliability

  • Gwon, Hyeok-Jin
    • Journal of the Korea Society of Computer and Information
    • /
    • v.22 no.7
    • /
    • pp.9-16
    • /
    • 2017
  • In this paper, we propose a development method of portable Automatic Test Equipment based on PXIe platform. Legacy VME form factor structured test equipment has limited reuse and expansion of modules due to unapplied bus specification. In particular, these limitations can cause development periods and costs to increase, and the reliability of environmental conditions is lacking due to non-standard modules. The test equipment of the proposed PXIe platform can use diverse COTS modules to shorten the development period and minimize the instability between developments. The PXIe development module works with standard Xilinx FPGAs, PXIe Windows device drivers, and applications on standard PXIe buses. The use of standard bus and COTS modules increases scalability and reusability, enabling rapid development and excellent maintenance. Through the test, we show the proposed test equipments can be implemented efficiently between the development processes and proved their reliability through function tests and environmental tests.

Factors associated with Behaviors that Reduce Exposure to Environmental Hormones among Nursing Students (환경호르몬 저감행동 영향요인)

  • Lee, Jungsuk;Bea, Hanju;Kim, HyeJin
    • Korean Journal of Occupational Health Nursing
    • /
    • v.28 no.4
    • /
    • pp.285-292
    • /
    • 2019
  • Purpose: This study aimed to examine the factors associated with behavior that reduces exposure to environmental hormones among nursing students. Methods: Data were collected from 160 nursing students in D and B cities, using self-report questionnaires. Data were analyzed using SPSS 22.0, and the analyses included descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient test, and stepwise multiple regression. Results: Behavior that reduces exposure to environmental hormones differed significantly in terms of the participants' knowledge about environmental hormones. Behavior that reduces exposure to environmental hormones was negatively correlated with knowledge of environmental hormones, attitude towards pro-environmental behavior, and environmental self-efficacy; these factors were significant predictors of behavior that reduces exposure to environmental hormones, and accounted for 27.0% of the variance. Conclusion: Environmental self-efficacy was identified as the most significant factor affecting behavior that reduces exposure to environmental hormones in nursing students. Therefore, it is necessary to develop programs to improve pro-environmental behavior and environmental self-efficacy in nursing students.

Effects of Civil Blasting on Noise, Vibration and Total Suspended Particles (토목 발파가 소음, 진동, 부유 분진에 미치는 영향)

  • Jeong, Jin Do;Jeong, Yeong Guk
    • Journal of Environmental Science International
    • /
    • v.13 no.1
    • /
    • pp.99-107
    • /
    • 2004
  • This research is to determine the level of environmental pollution at a blasting construction area which is the origin of noise, vibration, and suspended particle, and to compare the results with other domestic and international standard data. This experiment is also to find out the effects resulting from blasting construction and to propose a plan that can decrease environmental pollution. The blasting construction area is a factory site which is about one and half million square meter and sewage disposal plant is about ninety thousand square meter. Both were selected as the areas for the tests to be conducted in determination test. The test to determine the level of noise, vibration, and total suspended particle was conducted thirty times around the blasting construction area by comparing measurement results and numerical analysis. However, as the test was not conducted in the laboratory but in the actual blasting construction area, it was not possible to do the test with the same exact conditions each true. Therefore, the test was not ideal as conditions could change from test to test. For the most part, the level of noise was below the standard level of 70dB. Every vibration test was under the standard limitation. For example, a house, 200m away was tested for noise and vibration and the level was found to be under the 0.2 cm/sec which is the standard for specialty designed cultural sites., i.e very low level. Also a buried oil pipeline that was 30m away also marked under 2.0cm/sec which is the norm for an industrial area. However, if there were an oil pipeline under the house, the amount of charging gunpowder per hole should be decreased compared to the amount used in the test. The test result for suspended particles under the standard limitation which is 24hour average 300$\mu\textrm{g}$/㎥ at a distance from blasting wavelength, but at detonator, total suspended particle from the blast origin exceeded the standard limitation. If explosion occurs when it detonates in the hole, most of the energy would be absorbed in the crushing of rocks, but some remaining energy would make noises and vibration inevitable. So the important thing is how to minimize the environmental pollution from the blasting. There should be regulations in order that the standard limitation is not exceeded, and to decrease the environmental pollution from the blasting.

Application of Neutral Red Uptake Assay Using EPC Cells as an Alternative to the Fish Acute Toxicity Test for Pesticide (어류급성독성시험 대체법으로서 잉어표피세포를 이용한 Neutral Red Uptake 분석법 적용)

  • Seo, Ji-Hyun;Park, June-Woo;Lee, Sung-Kyu;Kim, Woo-Keun
    • The Korean Journal of Pesticide Science
    • /
    • v.18 no.1
    • /
    • pp.8-13
    • /
    • 2014
  • This study evaluated in vitro cytotoxicity of 5 pesticides, including 2 herbicides, 2 germicides, and an insecticide, as an alternative to the fish acute toxicity test. The in vitro cytotoxicity was tested using a neutral red uptake (NRU) assay with epithelioma papulosum cyprini (EPC) cells that originated from the epidermal tissue of Cyprinus carpio (common carp). An in vivo fish acute toxicity test was conducted according to OECD Test Guideline No. 203 using Aphyocypris chinensis (Chinese bleak), Oryzias latipes (Japanese medaka), and C. carpio. The results showed that the sensitivity of the cell viability assay for the pesticides was similar to the fish acute test in ranking order despite having approximately 10 times less absolute sensitivity. The $r^2$ correlation values were calculated as 0.38 (p = 0.26), 0.76 (p = 0.05) and 0.90 (p = 0.01) for A. chinensis, O. latipes, and C. carpio, respectively. These results suggested that the potential of EPC cell viability assay as an alternative to the fish acute toxicity test due to their good correlation and NRU assay is expected to serve as a useful tool for predicting acute fish lethality for pesticides if further studies with a large set of pesticides are conducted.

Selection of Domestic Test Species Suitable for Korean Soil Ecological Risk Assessment (토양생태 위해성평가를 위한 국내 서식 토양독성 시험종 선별 연구)

  • Kim, Shin Woong;Kwak, Jin Il;Yoon, Jin-Yul;Jeong, Seung-Woo;An, Youn-Joo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.5
    • /
    • pp.359-366
    • /
    • 2014
  • For an efficient and reasonable management scheme for protecting the soil environment, a soil ecological risk assessment (ERA) method should be developed prior to utilization, based on the contemporary uses and situations of each country. The Korean environmental policy focusing on soil protection is currently accelerating the development of the soil ecological risk assessment method. The soil ERA requires toxicological data on various trophic levels in the soil environment, and ultimately uses PNEC (Predicted No Effect Concentration), which is derived from collected toxicological data. Therefore, test species that are used to generate toxicity data are essential for conducting reliable ERA. This study aimed to select domestic test species for potential use in a reliable Korean ERA. Copper (Cu) and Nickel (Ni) were identified as target substances, with toxicity data (Cu, Ni) and standard test methods being collected to determine candidate species. The candidate species were first classified by soil trophic level, and then sorted into final domestic species. Forty out of 166 domestic species were determined as potential standard test species, whereas 17 out of 120 species were determined as potential Cu and Ni test species. Finally, this study presented potential soil test species based on the characteristics of the domestic soil environment, and established a preliminary step toward developing a reliable Korean soil ERA method.

Evaluation of Environmental Stability and Durability of Cementitious Mixed Soil (시멘트계 혼합토의 환경안정성 및 내구성 평가)

  • Oh, Sewook;Bae, Wooseok;Kim, Hongseok
    • Journal of the Korean GEO-environmental Society
    • /
    • v.23 no.9
    • /
    • pp.17-23
    • /
    • 2022
  • Using cement as a road subbase is economical, easily modified and supplemented and has excellent road pavement quality control. In addition, cement adheres well to sandy soils without adhesion, and it plays a role of permanently preserving adhesion in viscous soils with adhesion, so it can be widely applied as stable treatment with the advantages of increased strength, reduced compressibility. and improved durability. However, while cement is excellent in terms of strength for a road subbase, the material properties mean that it is difficult to maintain and reinforce when cracks or fractures occur due to dry shrinkage, and the pH increases in the ground due to hexavalent chromium eluting from cement. which can cause environmental problems such as groundwater contamination. Therefore, this study evaluates the usability of alternatives in the road base layer such as environmentally cementitious stabilizer and on-site soil generated from the site. We intend to reduce the environmental damage and evaluate the durability. To evaluate the applicability of the site, Environmental stability test and freeze-thaw test and wetting-drying test was conducted to evaluate the strength characteristics of alternative materials on the road through the limited performance evaluation of environmentally cementitious stabilizer. The test ranges were set at mixing ratios of 10%, 20%, and 30% and ages of three days, and 28 days old to evaluate the early strength and reference strength according to the mixing ratio of the environmentally cementitious stabilizer.