• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.183-189
• /
• 2009

Environmental conditions may cause the quality change of fruits during distribution after harvest. In order to prevent the damage or quality change of fruits for distribution, the characteristic of fruits affected by the environmental conditions such as temperature, humidity under various distribution conditions should be known. This research was performed to analyze how the environmental conditions affect the factors such as weight loss rate and ethylene production of the peach under several distribution conditions. Environmental conditions of the actual distributed route were evaluated and the data obtained from the conditions were used for the simulated environmental tests. Regression models of the weight loss rate and the ethylene production of peach were developed and used in predicting peach quality. The weight loss rate of the peach estimated by the ASHRAE data was shown the higher value on the transportation temperature condition than on the low and room temperature conditions. The weight loss rate and the ethylene production of the peach on the simulated distribution conditions were measured and the measured weight loss rate of peach was the smaller than the theoretically estimated one. The regression models of the weight loss rate and the ethylene production were developed respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.1-5
• /
• 2012

The quality and performance of electronic parts and equipment are affected by various types of stresses. Thermal stress caused by changes in the ambient usage environment and mechanical stress from vibration shock during transportation can degrade both quality and performance. This paper gives an overview about recent researches for measuring market environmental conditions of electronic equipments.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.33-42
• /
• 1996

The portion of the recycled paper and paper board packaging material has been the highest in recycled municipal solid waste since 1960 but still the portion of the discarded paper and paper board packaging material is the highest (32.3%) in whole discarded municipal solid waste in USA. In order to reduce more the discarded paper and paper board, the common municipal solid waste treatments were compared and recycling treatment was still recommended for the the discarded paper and paper board rather than of the waste treatments, landfill, incineration, and source reduction. In this paper, the obstacled of recycling treatment of the paper and paper board in municipal solid waste and new application of recycled paper and paper board packaging material are discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.45-53
• /
• 2007

When micro flute corrugated paperboards are used for food packaging, they necessarily need to meet the requirements for the distribution, transportation, and storage of food. The requirements could vary ac-cording to the contents in the packaging boxes. Microflute corrugated packaging paperboard for hot foods such as just-made coffee and hamburger requires to have a decent resistance property against high temperature. Along with a recent trend for small-quantity-multi-item upgraded packaging, semiconductor products and consumer-electronic appliances become to be packed using the environmental friendly micro flute corrugated paperboard. In this case, the electric resistance property of the microflute corrugated paperboard becomes important. This study was carried out to investigate on the thermal conductivity and electric resistance properties of micro flute corrugated paperboard.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.10
• /
• pp.9-14
• /
• 2022

Purpose: With the rapid development of China's e-commerce industry, the express delivery industry is also advancing by leaps and bounds. While express brings convenience to people's life, a large number of express packages are disposed of at will, which not only increases a large amount of domestic waste, but also causes environmental pollution and waste of resources. Therefore, express packaging recycling has become a consensus in all fields of society. Research design, data and methodology:According to the characteristics of express packaging recycling, other variables were introduced into the TPB model proposed by AJZEN, and based on previous literature research and research assumptions, a model of influencing factors of consumer behavior in express packaging recycling was constructed. Results: The results show that in addition to reward factors, other factors have a significant positive impact on the respondents' willingness to recycling. Conclusions: In order to enhance consumers' willingness to recycle express delivery and effectively carry out express packaging recycling, the following suggestions are put forward: the government should formulate a comprehensive express delivery recycling policy, strengthen policy publicity, and standardize consumers' express packaging recycling behavior. Improve consumers' awareness of express packaging recycling, and promote the increase in the scale of express packaging recycling.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.125-131
• /
• 2007

Biodegradable polymeric blends are expected to be widely used by industry due to their environmental friendliness and comparable mechanical and thermal properties. Poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) are such biodegradable polymers which aim to replace commodity polymers in future applications. Since cost and brittleness of PLA is quite high, it is not economically feasible to use it alone for day to day use as a packaging material without blending. In this study, blends of PLA and PBS with various compositions were prepared by using a laboratory-scale twin-screw extruder at $180^{\circ}C$. Morphological, thermal, rheological and mechanical properties were investigated on the samples obtained by compression molding to explore suitability of these compositions for packaging applications. Morphology of the blends was investigated by scanning electron microscopy (SEM). Morphology showed a clear phase difference trend depending on blend composition. Modulated differential scanning calorimetry (MDSC) thermograms of the blends indicated that the glass transition temperature ($T_g$) of PLA did not change much with the addition of PBS, but analysis showed that for PLA/PBS blend of up to 80/20 composition there is partial miscibility between the two polymers. The tensile strength and modulus were measured by the Instron Universal Testing Machine. Tensile strength, modulus and percentage (%) elongation at break of the blends decreased with PBS content. However, tensile strength and modulus values of PLA/PBS blend for up to 80/20 composition nearly follow the mixing rule. Rheological results also show miscibility between the two polymers for PBS composition less than 20% by weight. PBS reduced the brittleness of PLA, thus making it a contender to replace plastics for packaging applications. This work found a partial miscibility between PBS and PLA by investigating thermal, mechanical and morphological properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.1
• /
• pp.26-33
• /
• 2020

The plastic waste problem is deepening all over the world. Plastic wastes have serious impacts on our lives as well as environ- mental pollution. The production and use of plastics increases every year, but once they are produced, they usually roam the earth for hundreds or thousands of years to pollute the environment. Although there is growing interest in plastic issues around the world and environmental regulations are being tightened, but no clear solution has yet been found. This study suggests Environmental degradation index (EDI). EDI can help raise consumers' attention to plastic wastes. In addition, EDI will contribute to reduce them in the future. As far as we know, this is the first study. We developed EDI for the confectionery packaging. This study defines four factors that may affect the environment of confectionery packaging: greenhouse gas emissions, energy consumption, methane emissions, and packaging space ratio. Then we quantify the value of each element and compute EDI as the sum of the four component values. In order to evaluate the feasibility of EDI proposed in this study, confectionery-packaging materials distributed in Korea were collected and analyzed. First, the types of confectionery are classified into pies, biscuits, and snacks and basic data was collected. Then the values of the four components were calculated using existing research data on the environment. We can use the proposed EDI to determine how much a product packing affects the environment.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.15-23
• /
• 2015

Lead-free bonding has attracted significant attention for automotive power device packaging due to the upcoming environmental regulations. Silver (Ag) is one of the prime candidates for alternative of high Pb soldering owing to its superior electrical and thermal conductivity, low temperature sinterability, and high melting temperature after bonding. In this paper, the bonding technology by Ag paste was introduced. We classified into two Ag paste bonding according to applied pressure, and each bonding described in detail including recent studies.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.145-158
• /
• 2015

Disposable marine product packaging materials such as wooden, Styrofoam, and corrugated cardboard boxes have a very low reuse rate, thus causing the logistics costs to rise and making it difficult to establish a unit load system for marine products. Disposable packing containers to be discarded are accompanied by resource and environmental issues home and abroad. Transportation vehicles for marine products have to return empty without loading different kinds of products after delivery due to the smell and properties of marine products, thus posing as an obstacle to logistics rationalization. In an effort to overcome those limitations, this study examined the stages of transportation including "producer-wholesale market in the producing area-commission merchant-wholesale market in the consumption area-commission merchant-quasi-wholesale market-consumer" and also analyzed the utilization and distribution of disposable packaging materials currently used in the circulation of marine products including wooden, Styrofoam, and corrugated cardboard boxes. Based on the analysis results, the investigator developed a logistics rationalization model capable of promoting semi-permanent reuse and lowering empty vehicle rate on return routes as an alternative to address environmental issues caused by disposable packaging materials, which have been an obstacle to the logistics rationalization of marine products, packaging costs in the process of repeating packing and unpacking at each stage of marine products circulation, and empty vehicle rates on return routes after marine products delivery.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.3
• /
• pp.20-27
• /
• 2020

EPC contractors have made continuous efforts to develop integrated project execution methods to improve the performance of industrial plant project. In particular, the concept of Advanced Work Packaging (AWP) has been recently presented by readjusting the existing "Work Packaging" concept as part of the integrated project execution method from the project life-cycle perspective. However, Korean EPC contractors are still unfamiliar with the AWP implementation. Thus, this study aims to identify the organizational competency factor for effective implementation of AWP. For this purpose, first, this study identified the expected risks in AWP project and the 29 organizational competency factors to manage risks. Second, five experts verified the suitability of factors and supplemented the factors. Finally, 37 factors were identified as organizational competency factors for implementing AWP.