• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.603-606
• /
• 2000

The cost needed for the construction and management of highways in the whole nation is rapidly growing so the research that can decrease the cost is required. However, most of the highway specs have simply converted from those of other countries, including USA. Therefore, some of our design and construction specs were not the optimum ones based on our own situation, requiring a research under the actual traffic and environment of our nation. The use of test road develops many aspects of highway engineering. Those are evaluation of construction materials, a general overview of korea pavement design and serviceability under the actual traffic and environmental condition of the nation. It is also economical and efficient compared to the trial construction of each item in spreaded form. A test road, 7.7km long with two lanes, is being constructed on the Inner Central Expressway. In this test road, 2.7km is planned for asphalt pavement and 3.4km is planned for concrete pavement. Three test bridges and five earth retaining structures will be included in the test road. Based on the master plan, the major performance was progressing such as detailed research modules of each area, preliminary research for the future research, sensor surveys for the behavior analyses of pavements and structures with installation methods and data acquisition systems, the foundation research of Integrated Instrumentation System and the Management Plan for automated measurement. Some area(structure research division, geotechnical research division) was designed the instrumentation plan because some instrument sensors must be installed during the construction of the test road. And then the instrumentation plan of each area was enforcing because a large majority of the instrument sensors must be installed after the construction of the test road. The field surveys with material property tests and pilot instrumentation test with sensor tests was also performing in accordance with the construction in the field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.743-744
• /
• 2016

Due to the many amenities of a modern power with solar power and green energy alternative to injury by cutting down on the number of solar energy and pollution and environmental factors. There is still much research and trying to incorporate a variety of applications. In this paper, create a daytime energy by fusing solar panels and billboards, and at night has the advantage that you can save more energy used to sign by the sign serves also and at the same time energy acts like a tent when the day by using the power usage is expected to be higher.

• Journal of Biomedical Engineering Research
• /
• v.12 no.4
• /
• pp.309-314
• /
• 1991

This paper describes the results of study on the measurement method of TRMS (true root mean square value) In electrosurgical unit. We used three type (direct computing type, indirect computing type, thermal converting type) in the measurement of TRMS. Three types of measurement method were compared with respect to power level, frequencey and crest factor in addition to environmental temperature. In three of them, the thermal converting type was the best for th electrosurgical unit analyzer

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.230-233
• /
• 1987

This paper addresses the identification of various constraints in time-varying obstacle avoidance for mechanical manipulators. The manipulator constraints include the smoothness constraint and torque constraint, while the environmental constraints include a motion priority, a traveling time constraint, a path constraint, and a collision constraint. The inherent difficulties in combining these constraints are discussed with a suggestion for the purpose of time-varying obstacle avoidance.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.238-240
• /
• 2010

최근에는 U-City 등 유비쿼터스 기반의 각종 시스템 및 기술이 개발되어 우리의 생활을 보다 편리하도록 한다. 본 논문에서는 USN의 응용이라고 할 수 있으며, 일정한 공간 내 혹은 외부의 환경요소를 수집하여 원격으로 확인할 수 있는 시스템에 대해 연구한다.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.197-200
• /
• 2007

Advanced control is getting increasingly demanded in water and wastewater treatment systems. Various case studies have shown significant savings in operating costs, including energy costs, and remarkably short payback times. It has been demonstrated that instrumentation, control and automation (ICA) may increase the capacity of biological nutrient removing wastewater treatment plants by 10-30% today. With further understanding and exploitation of the mechanisms involved in biological nutrient removal the improvements due to ICA may reach another 20-50% of the total system investments within the next 10-20 years. Disturbances are the reason for control of any system. In a wastewater treatment system they are mostly related to the load variations, but many disturbances are created also within the plant. In water supply systems some of the major disturbances are related the customer demand as well as to leakages or bursts in the pipelines or the distribution networks. Hardly any system operates in steady state but is more or less in a transient state all the time. Water and energy are closely related. The role of energy in water and wastewater operations is discussed. With increasing energy costs and the threatening climate changes this issue will grow in importance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.171-177
• /
• 2004

Many instrumentations have been used to acquire the performance data of military systems fer many years. But they could not satisfy environmental specifications(vibration, shock, temperature) and processing speed to apply for the performance test of military systems because of having developed as common vehicles/fixed installation equipments. Thus a new rugged embedded measurement system is required to process large data in high processing speed(Maximum sample rate:1.25Mhz/ch) with rugged environmental specifications. We have developed embedded measurement systems by using PXI(PCI extension for Instrumentation)bus interface composed of a stand alone controller and versatile data acquisition boards(analog, digital, vision, temperature and small signal conditioner) on PC-based environment to solve these problems. Operation programs have been developed using Lab_View and the performances have been validated experimentally.

• Applied Microscopy
• /
• v.48 no.1
• /
• pp.1-5
• /
• 2018

Cryo-transmission electron microscopy (cryo-TEM) allows us to perform structural analysis of a analyses of large protein complexes, which are difficult to analyze using X-ray crystallography or nuclear magnetic resonance. The most common examples of proteins used are ribosomes and proteasomes. In this paper, we briefly describe the advantage of cryo-TEM and the process of two-dimensional classification by considering a human proteasome as an example.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.2
• /
• pp.326-328
• /
• 2013

Sericin undergoes gelation by the structural transition from random coil to b-sheet transition. In the present study, the gelation time of sericin solution was investigated in the presence of NaCl, KCl and $CaCl_2$. The addition of salts delayed the gelation time, and $CaCl_2$ had the most pronounced effect, which delayed about 8 h at maximum. The gelation time increased with the concentration of salt. The transition of secondary structure of sericin was retarded in the presence of salt. The effect of salts on the gelation time of sericin might be due to the solvation effect of relevant cation.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.399-405
• /
• 2013

This study demonstrates the utilization of light microscopy and Fast Fourier Transform-Peak Finding (FPF) method for microfibril angle (MFA) measurement from unstained sections of red pine (Pinus densiflora). To obtain an image with optimal contrast and resolution for MFA measurement, effects of numerical aperture (NA) of condenser lens and color filters were investigated. About 60% of NA of the maximum condenser NA produced an image with optimal contrast, but a color filter with short wavelength range (DAPI) created images with improved resolution. Manual angle measurement and the FPF method were applied to the image with optimal contrast for MFA measurement. The experimental results from the FPF method were considered to be more repeatable and less subjective than those from the manual angle measurement.