Objectives: The purposes of the study were to investigate hazardous pollutant emissions changes among group 1 carcinogens. The emissions characteristics were compared with national cancer registration statistics. Methods: A survey of group 1 carcinogen hazardous pollutant emissions (trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, ethylene oxide, chromium and its compounds, 3,3'-dichloro-4,4-diaminodiphenylmethane, chloromethyl methyl ether, arsenic and its compounds, cadmium and its compounds, o-toluidine) was conducted through a homepage for 2001-2015. The emission of hazardous chemicals and the cancer trend analysis for 2001-2015 were performed using the Korean statistical information service through its homepage as a reference. Results: Emissions of more than 95% of the substances listed as group 1 carcinogens over the last five years were made up of trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, and ethylene oxide. As a result of the comparison of emission results and cancer incidence rates, carcinogen pollutant emissions showed a tendency to decrease continuously. In addition, the incidence of cancer tended to increase, but showed a tendency to decrease from 2012. Conclusion: The results indicate hazardous pollutant emissions have continued to increase. However, no association between emissions and health effects was shown and more research is needed.
This study investigated the current management staus of chemical substance information on Material Safety Data Sheets(MSDS) and Chemical Information Cards(CIC) provided by Korea Occupational Safety & Health Agency(KOSHA) and also researched the kind and the characteristics of chemical substance information provided in other organizations. MSDS DB in Korean provided on KOSHANET(which is Kosha website) is 50,802 in total, among whom are single chemical substances with 31,870 kinds(18,932%) and are mixed chemical substances with 31,870 kinds(62.7%). The number of visiting MSDS DB on KOSHANET for the search of chemicals was 2,049,806. The number has increased each year. The CIC provided for workplaces is all 542 kinds : 14 harmful substances subject to permission, 168 harmful substances subject to management, 360 KOEL(Korean Occupational Exposure Limits) establishment substances. MSDS internationally provided by organizations producing MSDS DB was written with 16 sections, which is suitable for the writing basis of American Standards Institute(ANSI) and International Organization for Standardization(ISO) and provided chemical substance information on more than 100,000 kinds in most organizations.
도시 하수처리장에서 수집되는 폐활성 슬러지는 유기성 물질을 다량 함유하고 있는 바이오매스이다. 하지만, 대부분의 연구 결과 폐활성 슬러지를 이용한 생물학적 수소생산율은 매우 낮다고 보고되고 있다. 본 연구에서는 폐활성 슬러지를 산, 알카리 처리, 기계적 처리, 열처리, 오존 처리, 초음파 처리 등의 전처리에 대한 효과를 살펴보았다. 전처리 실험결과, 폐활성 슬러지 내의 유기물질들은 가용화되었으며 $SCOD_{Cr}$값으로 약 14.6배의 증가를 보였다. 열처리된 혐기성 슬러지를 이용하여 폐활성 슬러지로부터 최적의 생물학적 수소생산을 위한 실험은 전처리 방법에 대한 효과 및 완충용액의 효과, 수소분압, 그리고 염소이온의 농도 등에 대하여 회분식 조건에서 살펴보았다. 실험결과 효과적인 전처리 방법 및 완충용액의 첨가, gas sparging 등의 방법에 의한 낮은 수소분압인 경우에 수소생산율이 0.52 mmol $H_2/g$-DS(Dried Solids)로 크게 증가함을 확인하였다.
Objectives: This study aimed to review the characteristics of three-dimensional printing technology focusing on printing types, materials, and health hazards. We discussed the methodologies for exposure assessment on hazardous substances emitted from 3D printing through article reviews. Methods: Previous researches on 3D printing technology and exposure assessment were collected through a literature review of public reports and research articles reported up to July 2018. We mainly focused on introducing the technologies, printing materials, hazardous emissions during 3D printing, and the methodologies for evaluation. Results: 3D printing technologies can be categorized by laminating type. Fused deposition modeling(FDM) is the most widely used, and most studies have conducted exposure assessment using this type. The printing materials involved were diverse, including plastic polymer, metal, resin, and more. In the FDM types, the most commonly used material was polymers, such as acrylonitrile-butadiene-styrene(ABS) and polylactic acids(PLA). These materials are operated under high-temperature conditions, so high levels of ultrafine particles(mainly nanoparticle size) and chemical compounds such as organic compounds, aldehydes, and toxic gases were identified as being emitted during 3D printing. Conclusions: Personal desktop 3D printers are widely used and expected to be constantly distributed in the future. In particular, hazardous emissions, including nano sized particles and various thermal byproducts, can be released under operation at high temperatures, so it is important to identify the health effects by emissions from 3D printing. Furthermore, appropriate control strategies should be also considered for 3D printing technology.
Background: Despite children's unique characteristics that distinguish them from adults, relatively few attempts have been made to measure exposure factors for characterization of children's exposure to hazardous chemicals in child-specific products (CSP). This study was conducted to establish the child-specific exposure factors for exposure and risk assessment of hazardous substances in CSP. Methods: We investigated the exposure factors (e.g., time use of child-products, time and frequency of object-to-body contact, time and frequency of object-to-mouth contact) influencing children's exposure to CSP (e.g., toys, playmats, oil pastels, etc.) in 650 children through a parent-completed questionnaire using a web-based survey. Participants were recruited in five age groups, <1, 1-2, 2-3, 3-6, and 6-12 years of age. Results: The child-specific exposure factors were presented as the mean, median, $95^{th}$ percentile, minimum, and maximum values. Time activity for play mats was the longest among CSP and infants spent more time on them than did elder age groups (189.3-224.7 min/day for <1-2 years vs. 91.2 min/day for 6-12 years). It is apparent that time and frequency of toy block- and plastic toy-to-mouth contact significantly decreased as a function of age. When the variation of CSP use patterns was compared by gender, the only variable that was statistically different between genders was time activity in child-products exposure space. Conclusion: We believe the five child-specific exposure factors suggested in the present study will be valuable for reducing uncertainty in the estimation of chemical exposure during risk assessment of CSP and furthermore, in the appropriate regulations to protect children's health.
수환경 내 다양한 유해물질의 위해성에 대한 관심은 환경 매체 내 물질의 농도뿐만 아니라 복잡한 먹이단계를 통한 어류 체내의 축적과 어류를 통한 인체 위해성으로 이어진다. 국내의 경우 2016년 이후 생활에서 사용되고 있는 화학제품(생활화학제품) 기인 위해 우려물질의 관리를 위한 등록과 평가 등에 관한 법률 개정과 함께 이들 물질의 환경 배출이 주목받게 됨에 따라 수생태계 내 잔류여부에 대한 조사도 수행되기 시작했다. 최근에는 이러한 물질의 관리를 위한 생태계 내 분포 조사 및 배출 계수 산정을 위한 연구사업이 수행되고 있는데 해당 연구 사업에서는 세정제, 접착제, 염색제, 방향제 등을 비롯한 화장품이나 세제 등에 포함되는 성분과 살균·소독제를 대상으로 영양단계 내 축적과 전달을 이해하기 위한 물질의 축적과 확대를 포함한다. 본 논문은 최근 발표된 생활화학제품기인 유해물질의 수환경 유입 및 분포에 대한 연구 결과를 정리하고 그 과학적 의미를 제시하며 또한 국내외 수행되고 있는 수환경 모니터링 기법에 대한 연구의 예를 바탕으로 현재 유해화학물질의 수환경 내 잔류 농도 및 분포, 생태계 모니터링을 위한 연구의 방향을 제안하고자 한다. 특히 어류를 대상으로 하는 조사에서 국내 수역에 서식하는 주요 어류조사 및 이를 바탕으로 한 대상 어류 선정의 필요성과 인체 위해성 연구의 필요성 등 시기적으로 요구되는 연구를 위한 영양단계 해석과 생물확대계수 연구의 방향을 소개하며 향후 국내에서 수행되고 있는 생물상 모니터링과 화학물질 연구에 대한 제언을 포함한다.
Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.
This study serves as basic research for the development of a new wood-based building finishing material that improved the weakness of inorganic materials such as gypsum board and magnesium board widely used as interior finishing materials and brought out the strength of the wood. The results of evaluating the physical and mechanical properties and the environmental effect related to hazardous substance discharge having manufactured a wood-magnesium laminated composite are as follows. The thermal conductivity and thermal resistance of WML board was improved by about 28~109 percent over magnesium board due to the low thermal conductivity of wood. The adhesive strength of WML board showed a similar result to that of plywood as it exceeds 0.7N/㎟, the adhesive standard of wood veneer which is presented by KS F 3101. Bending strength and screw holding strength were more improved by manufacturing WML board than magnesium board. The WML board manufactured in this study satisfied the criteria for emissions of hazardous substances prescribed in the Indoor Air Quality Control Act, and confirmed the possibility of development as a new wood-based composite material that can replace existing inorganic materials.
The Purpose of this study is to research the problems of trade restriction for an environment protection. Environmental regulation relate to trade are Convention on International Trade in Endangered Species of Wild Fauna & Flora, Montreal Protocol on Substances that Deplete the Ozone Layer, Kyoto Protocol to the UN Framework Convention on Climate Change, Basel Convention on the Control of Transboundary Movements of Hazardous Wastes & Their Disposal, Cartagena Protocol on Biosafty and WTO Agreement. Regulatory action for environmental protection has economics instrument, command & control, liablity, damage compensation, voluntary agreement. In the case of our country, impact of regulatory action for environmental protection is low. Because is recognized position of developing country yet. For in the balance rules of trade and enviroment, First must satisfy WTO's basic principles and principle of quantitative restrictions prohibition, Second, operation of protection action must reasonable and objective standards Third, must satisfy GATT article 20 (b) clause and (g) protestation each essential factor To grow for environment advanced country, we should do i) using of FTA ii) international cooperation strengthening for developing country position iii) construction of environment information network
영농지역에서 비점오염원인 농약의 살포가 수질환경에 미치는 영향과 유출량을 평가 하였다. 충북 괴산군 괴산읍 능촌리 일대 폐쇄권역에서 소수계내 물 중 잔류농약은 20종의 성분이 검출되었으며, 살균제 4종, 살충제 10종, 제초제 6종이었고, 검출범위는 0.008${\sim}$7.59 ppb 수준으로 배출수 기준보다 훨씬 못 미치는 수준이었다. 대하천 유입전 소수계 물 중 시기별 잔류농약 성분은 살균제가 5${\sim}$8월, 살충제는 7${\sim}$8월 및 제초제는 5${\sim}$7월에 주로 검출되었고, 밭에 사용하는 농약보다 수도용 농약이 검출 빈도가 높았다. 또한 강우강도가 높을 때는 밭토양의 토사 유출로 밭에 사용하는 농약이 상대적으로 높게 검출되었다. 작물 재배조건별 검출된 잔류농약성분은 고추밭 토양 6종, 과수원 토양 4종, 참깨밭 토양 3종 및 논토양 5종으로 총 13종이 검출되었으며, 검출 범위는 0.001${\sim}$0.109 ppm 수준이었다. 공주시 정암면 고성리 영농지역의 소수계내 물 중 농약잔류성분은 13종(살균제2, 살충제6, 제초제5)의 성분이 검출되었으며 검출범위는 0.01${\sim}$7.21ppb 수준으로 잠정 배출수 기준보다 못 미치는 수준이었다. 농약 종류별 검출양상은 살균제는 5${\sim}$8월, 살충제는 7${\sim}$8월, 제초제는 5${\sim}$6월에 주로 검출되었으며 강우시간별 물 중 농약잔류량은 강우시작 3${\sim}$5시간에 최고농도가 검출되었고 수도용 농약의 검출 빈도가 높았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.