References
- Afshar-Mohajer N, Wu CY, Ladun T, Rajon DA, Huang Y. Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer. Build Environ 2015;93:293-301. https://doi.org/10.1016/j.buildenv.2015.07.013
- American Society for Testing and Materials(ASTM) International. Subcommittee F42. 91 on Terminology. Standard terminology for additive manufacturing technologies. 2012.
- Azimi P, Fazli T, Stephens B. Predicting concentrations of ultrafine particles and volatile organic compounds resulting from desktop 3D printer operation and the impact of potential control strategies. J Ind Ecol 2017; 21(S1):S107-S119. https://doi.org/10.1111/jiec.12578
- Azimi P, Zhao D, Pouzet C, Crain NE , Stephens B. Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ Sci Technol 2016;50(3):1260-1268. https://doi.org/10.1021/acs.est.5b04983
- Berman B. 3D printing: The new industrial revolution. Bus Horizons 2012;55(2):155-162. https://doi.org/10.1016/j.bushor.2011.11.003
- Cheng SF, Chen ML, Hung PC, Chen CJ, Mao IF. Olfactory loss in poly(acrylonitrile-butadiene-styrene) plastic injectionmoulding workers. Occup Med 2004;54(7):469-474. https://doi.org/10.1093/occmed/kqh101
- Cheves S. A pilot study to evaluate VOCs outgassed in polymer filaments used in 3D printing. 2014:1-26.
- Cho E, Lee H. Initiative of manufacturing innovation. KiET Report Issue No. 2014-344. 2014.
- Chohan JS, Singh R, Boparai KS, Penna R, Fraternali F. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Compos Part B-Eng 2017;117:138-149. https://doi.org/10.1016/j.compositesb.2017.02.045
- Choi C. Characteristics of particle emissions according to parameter setting. Dissertation of Graduate School of Hanyang University, Seoul, Republic of Korea. 2016.
- Cimino D, Rollo G, Zanetti M, Bracco P. 3d printing technologies: are their materials safe for conservation treatments? IOP Conference Series: Materials Science and Engineering, 2018. IOP Publishing, 012029.
- Cooper KG. Rapid prototyping technology, New York: Marcel Dekker Inc.; 2001.
- Deng Y, Cao SJ, Chen A, Guo Y. The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction. Build Environ 2016;104:311-319. https://doi.org/10.1016/j.buildenv.2016.05.021
- Drummer D, Wudy K, Drexler M. Influence of energy input on degradation behavior of plastic components manufactured by selective laser melting. Physics Pro 2014;56:176-183. https://doi.org/10.1016/j.phpro.2014.08.160
- Du Preez S, Johnson A, LeBouf RF, Linde SJ, Stefaniak AB, et al. Exposures during industrial 3-D printing and post-processing tasks. Rapid Prototyping J 2018:1-8.
- Edgar J, Tint S. Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing. Johnson Matthey Tech 2015;59(3):193-198. https://doi.org/10.1595/205651315X688406
- Elliott A, Ivanova O, Williams C, Campbell T. An investigation of the effects of quantum dot nanoparticles on photopolymer resin for use in polyjet direct 3D printing. Proceedings of the 2012 SFF SSymposium. 2012.
- Forrest M, Jolly A, Holding S, Richards S. Emissions from processing thermoplastics. AnnOccup Hyg 1995;39(1): 35-53.
- Groth C, Kravitz ND, Jones PE, Graham JW, Redmond WR. Three-dimensional printing technology. J Clin Orthod 2014;48(8):475-85.
- Huang SH, Liu P, Mokasdar A, Hou L. Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Tech 2013;67(5-8):1191-1203. https://doi.org/10.1007/s00170-012-4558-5
- Jamshidian M, Tehrany EA, Imran M, Jacquot M, Desobry S. Poly-lactic acid: production, applications, nanocomposites, and release studies. Compr Rev Food Sci F 2010;9(5): 552-571. https://doi.org/10.1111/j.1541-4337.2010.00126.x
- Jang BN, Wilkie CA. The thermal degradation of bisphenol A polycarbonate in air. Thermochimica Acta 2005;426 (1-2):73-84. https://doi.org/10.1016/j.tca.2004.07.023
- Kim S, Shim W. Manufacturing innovation and material industiry focusng on advanced materials and 3D printing. KiET Report Issue No. 2016-401. 2016.
- Kim Y, Yoon C, Ham S, Park J, Kim S, et al. Emissions of nanoparticles and gaseous material from 3D printer operation. Environ Sci Technol 2015;49(20):12044-12053. https://doi.org/10.1021/acs.est.5b02805
- Klosterman D, Chartoff R, Graves G, Osborne N, Priore B. Interfacial characteristics of composites fabricated by laminated object manufacturing. Compos Part A-Appl S 1998;29(9-10):1165-1174. https://doi.org/10.1016/S1359-835X(98)00088-8
- Ko SH, Pan H, Grigoropoulos CP, Luscombe CK, Frechet JM, et al. All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature highresolution selective laser sintering of metal nanoparticles. Nanotechnology 2007;18(34):345202. https://doi.org/10.1088/0957-4484/18/34/345202
- Kruth JP. Material incress manufacturing by rapid prototyping techniques. CIRP Ann-Manuf Technol 1991;40(2): 603-614. https://doi.org/10.1016/S0007-8506(07)61136-6
- Kruth JP, Vandenbroucke B, Van Vaerenbergh J, Naert I. Rapid manufacturing of dental prostheses by means of selective laser sintering/melting. Proc AFPR S. 2005; 4:176-186.
- Kuo CC, Liu LC, Teng WF, Chang HY, Chien FM, et al. Preparation of starch/acrylonitrile-butadiene-styrene copolymers(ABS) biomass alloys and their feasible evaluation for 3D printing applications. Compos Part B-Eng 2016;86:36-39. https://doi.org/10.1016/j.compositesb.2015.10.005
- Kwon O, Yoon C, Ham S, Park J, Lee J, et al. Characterization and control of nanoparticle emission during 3D printing. Environ Sci Technol 2017;51(18):10357-10368. https://doi.org/10.1021/acs.est.7b01454
- Lee JY, An J, Chua CK. Fundamentals and applications of 3D printing for novel materials. Appl Mater Today 2017; 7:120-133. https://doi.org/10.1016/j.apmt.2017.02.004
- Lee K, Lee Y, Lee J, Lee J, Kim Y, et al. The impact of 3D printing on industries and countermeasures. KiET Report Issue No. 2016-817. 2016.
- Lithner D, Larsson A, Dave G. Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition. Sci Total Environ 2011; 409(18):3309-3324. https://doi.org/10.1016/j.scitotenv.2011.04.038
- Mansour OY. Thermal degradation of some thermoplastic polymers in presence of lignin. Polym-Plast Technol 1992;31(9-10):747-758. https://doi.org/10.1080/03602559208017779
- Morvan S, Hochsmann R, Sakamoto M. ProMetal RCT(TM) process for fabrication of complex sand molds and sand cores. Rapid Prototyping 2005;11(2):1-7.
- Mueller B. Additive manufacturing technologies-Rapid prototyping to direct digital manufacturing. Assembly Autom 2012;32(2).
- Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. Additive manufacturing(3D printing): A review of materials, methods, applications and challenges. Compos Part B-Eng 2018;143(15):172-196. https://doi.org/10.1016/j.compositesb.2018.02.012
- Noorani R. Rapid prototyping: principles and applications. New York: John Wiley and Sons Inc.; 2006.
- Pham D, Ji C. Design for stereolithography. Proceedings of the Institution of Mechanical Engineers, Part C: J Mech Eng Sci 2000;214(5):635-640.
- Rutkowski JV, Levin BC. Acrylonitrile-butadiene-styrene copolymers(ABS): Pyrolysis and combustion products and their toxicity-a review of the literature. Fire Mater 1986;10(3-4):93-105. https://doi.org/10.1002/fam.810100303
- Ryan T, Hubbard D. 3-D printing hazards: Literature review & preliminary hazard assessment. Prof Saf 2016;61(6): 56-62.
- Shirazi SFS, Gharehkhani S, Mehrali M, Yarmand H, Metselaar HSC, et al. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mat 2015;16(3):033502. https://doi.org/10.1088/1468-6996/16/3/033502
- Singh S, Ramakrishna S, Singh R. Material issues in additive manufacturing: A review. J Manuf Process 2017;25: 185-200. https://doi.org/10.1016/j.jmapro.2016.11.006
- Srivatsan T, Sudarshan T. Additive manufacturing: innovations, advances, and applications, Boca Ranton: CRC Press Inc; 2015.
- Stabile L, Scungio M, Buonanno G, Arpino F , Ficco G. Airborne particle emission of a commercial 3D printer: The effect of filament material and printing temperature. Indoor Air 2017;27(2):398-408. https://doi.org/10.1111/ina.12310
- Stansbury JW, Idacavage MJ. 3D printing with polymers: Challenges among expanding options and opportunities. Dent Mater 2016;32(1):54-64. https://doi.org/10.1016/j.dental.2015.09.018
- Stefaniak AB, LeBouf RF, Yi J, Ham J, Nurkewicz T, et al. Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer. J Occup Env Hyg 2017;14(7):540-550. https://doi.org/10.1080/15459624.2017.1302589
- Steinle P. Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings. J Occup Env Hyg 2016;13(2):121-132. https://doi.org/10.1080/15459624.2015.1091957
- Stephens B, Azimi P, El Orch Z, Ramos T. Ultrafine particle emissions from desktop 3D printers. Atmos Environ 2013;79:334-339. https://doi.org/10.1016/j.atmosenv.2013.06.050
- Tiganis B, Burn L, Davis P, Hill A. Thermal degradation of acrylonitrile-butadiene-styrene(ABS) blends. Polym Degrad Stabil 2002;76(3):425-434. https://doi.org/10.1016/S0141-3910(02)00045-9
- Unwin J, Coldwell MR, Keen C, McAlinden JJ. Airborne emissions of carcinogens and respiratory sensitizers during thermal processing of plastics. Ann Occup Hyg 2012;57(3):399-406. https://doi.org/10.1093/annhyg/mes078
- Vance ME, Pegues V, Van Montfrans S, Leng W, Marr LC. Aerosol emissions from fuse-deposition modeling 3D printers in a chamber and in real indoor environments. Environ Sci Technol 2017;51(17):9516-9523. https://doi.org/10.1021/acs.est.7b01546
- Wang X, Jiang M, Zhou Z, Gou J, Hui D. 3D printing of polymer matrix composites: A review and prospective. Compos Part B-Eng 2017;110:442-458. https://doi.org/10.1016/j.compositesb.2016.11.034
- Wojtyla S, Klama P, Baran T. Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon. J Occup Env Hyg 2017;14(6):D80-D85. https://doi.org/10.1080/15459624.2017.1285489
- Wong KV, Hernandez A. A review of additive manufacturing. ISRN MechaEng 2012:1-10.
- Yang Y, Li L. Total volatile organic compound emission evaluation and control for stereolithography additive manufacturing process. J Clean Prod 2018;170:1268-1278. https://doi.org/10.1016/j.jclepro.2017.09.193
- Yi J, LeBouf RF, Duling MG, Nurkiewicz T, Chen BT, et al. Emission of particulate matter from a desktop threedimensional(3D) printer. J Toxic Env Health Part A 2016;79(11):453-465. https://doi.org/10.1080/15287394.2016.1166467
- Zhou Y, Kong X, Chen A, Cao S. Investigation of ultrafine particle emissions of desktop 3D printers in the clean room. Procedia Engineer 2015;121:506-512. https://doi.org/10.1016/j.proeng.2015.08.1099