• Title/Summary/Keyword: envelope curve

Search Result 77, Processing Time 0.021 seconds

Envelope of the Wallace-Simson Lines with Signed Angle ${\alpha}$

  • Bae, Sung Chul;Ahn, Young Joon
    • Journal of Integrative Natural Science
    • /
    • v.5 no.1
    • /
    • pp.38-41
    • /
    • 2012
  • In this paper we show that for any triangle and any point on the circumcircle the envelope of the Wallace-Simson lines with signed angle ${\alpha}$ is a parabola. The proof is obtained naturally using polar coordinates. We also present the reparametrization of the envelope which is a linear normal curve.

Computing Planar Curve Offset Based on Surface/Surface Intersection (교차곡선 연산을 이용한 평면 곡선의 오프셋 계산)

  • 최정주
    • Korean Journal of Computational Design and Engineering
    • /
    • v.3 no.2
    • /
    • pp.127-134
    • /
    • 1998
  • This paper presents d new algorithm to compute the offlet curve of a given planar parametric curve. We reduce the problem of computing an offset curve to that of intersecting a surface to a paraboloid. Given an input curve C(t)=(x(t), y(t))∈R², the corresponding surface D/sub c(t)/ is constructed symbolically as the envelope surface of a one-parameter family of tangent planes of the paraboloid Q:z=x²+y²along a lifted curve C(t)=(x(t), y(t), x(t)²+y(t)²∈Q. Given an offset distance d∈R, the offset curve C/sub d/(t) is obtained by the projection of the intersection curve of D/sub c(t)/ and a paraboloid Q:z=x²+y²-d² into the xy-plane.

  • PDF

Energy dissipation response of brick masonry under cyclic compressive loading

  • Senthivel, R.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • v.16 no.4
    • /
    • pp.405-422
    • /
    • 2003
  • Scaled brick masonry panels were tested under cyclic unialxial compression loading to evaluate its deformation characteristics. An envelope stress - strain curves, a common point curves and stability point curves were obtained for various cyclic test conditions. Loops of the stress-strain hysteresis were used to determine the energy dissipation for each cycle. Empirical expressions were proposed for the relations between energy dissipation and envelope and residual strains. These relations indicated that the decay of masonry strength starts at about two-third of peak stress.

Influence of bed joint orientation on interlocking grouted stabilised mud-flyash brick masonry under cyclic compressive loading

  • Nazar, Maqsud E.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • v.24 no.5
    • /
    • pp.585-599
    • /
    • 2006
  • This paper describes a series of laboratory tests carried out to evaluate the influence of bed joint orientation on interlocking grouted stabilised mud-flyash brick masonry under uniaxial cyclic compressive loading. Five cases of loading at $0^{\circ}$, $22.5^{\circ}$, $45^{\circ}$, $67.5^{\circ}$ and $90^{\circ}$ with the bed joints were considered. The brick units and masonry system developed by Prof. S.N. Sinha were used in present investigation. Eighteen specimens of size $500mm{\times}100mm{\times}700mm$ and twenty seven specimens of size $500mm{\times}100mm{\times}500mm$ were tested. The envelope stress-strain curve, common point curve and stability point curve were established for all five cases of loading with respect to bed joints. A general analytical expression is proposed for these curves which fit reasonably well with the experimental data. Also, the stability point curve has been used to define the permissible stress level in the brick masonry.

W/C Ratio Effects on Mechanical Properties of High Performance hybrid SC and PE Fibers Reinforced Cement Composites (물-시멘트비에 따른 하이브리드 섬유보강 고인성 시멘트 복합체의 역학적 특성)

  • Yun, Hyun-Do;Kim, Sun-Woo;Cheon, Esther;Lee, Sang-Soo
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2006.05a
    • /
    • pp.118-121
    • /
    • 2006
  • The research reported here is concerned with the effects of the fiber combination condition and water/cement ratio on the mechanical properties of high performance fiber-reinforced cementitious composites(HPFRCC). An experimental investigation of the behavior of steel cords(SC) and SC and Polyethylene(PE) hybrid fiber reinforced cementitious material under compressive and tensile loading is presented. In this experimental research, the tensile and compressive strength and strain capacity of HPFRCC were selected using the cylindrical specimens. The results show that W/C ratio is a significant effect factor on the compressive and tensile performance of HPFRCC. The envelope curve concept applies to hybrid fiber-reinforced cementitious composites in tension just as it does to compressive stress-strain curve of fiber-reinforced cement composites. For practical purposes, the tensile envelope curve may be taken to be the same as the monotonic tensile stress-strain curve.

  • PDF

Construction of Design Table for Envelope Curve Analysis of Base Isolated Buildings (면진건물의 포락해석을 위한 설계용 도표 산정면진건물의 포락해석을 위한 설계용 도표 산정면진건물의 포락해석을 위한 설계용 도표 산정)

  • Lee, Hyun-Ho;Cheon, Yeong-Soo
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.10 no.2
    • /
    • pp.59-67
    • /
    • 2006
  • The aim of this study is to evaluate the design table for envelope curve analysis of base isolated buildings, which represent the period of base isolated buildings and the lateral displacement of base isolation devices. For the construction of design table, $V_E$ spectrum, which represents the energy, is developed instead of acceleration of seismic hazard. Based on the seismic coefficient of UBC 97, boundary period $T_G$ and maximum velocity response $V_0$ are proposed considering Korea seismic hazard. Using $T_G$ and $V_0$, finally, $V_E$ spectrum is developed for the four types of soil conditions. Base on the $V_E$ spectrum, design table for envelope curve analysis is also developed for soil types.

Deformation characteristics of brick masonry due to partial unloading

  • Alshebani, Milad M.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • v.11 no.5
    • /
    • pp.565-574
    • /
    • 2001
  • Experimental investigation into the behaviour of half-scale brick masonry panels were conducted under cyclic loading normal to the bed joint and parallel to the bed joint. For each cycle, full reloading was performed with the cycle peaks coinciding approximately with the envelope curve. Unloading, however, was carried out fully to zero stress level and partially to two different stress levels of 25 percent and 50 percent of peak stress. Stability point limit exhibits a unique stress-strain curve for full unloading but it could not be established for partial unloading. Common point limit was established for all unloading-reloading patterns considered, but its location depends on the stress level at which unloading is carried to. Common point curves were found to follow an exponential formula, while residual strains versus envelope strains can be expressed by a polynomial function of a single term. The relation between residual strain and envelope strain can be used to determine the stress level at which deterioration due to cyclic loading began.

Polar Transmitter with Differential DSM Phase and Digital PWM Envelope

  • Zhou, Bo;Liu, Shuli
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.14 no.3
    • /
    • pp.313-321
    • /
    • 2014
  • A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

THE NEW ECLIPSING POST COMMON-ENVELOPE BINARY SDSS J074548.63+263123.4

  • HEMHA, NIWAT;SANGUANSAK, NUANWAN;IRAWATI, PUJI;DHILLON, VIK;MARSH, TOM R.
    • Publications of The Korean Astronomical Society
    • /
    • v.30 no.2
    • /
    • pp.201-204
    • /
    • 2015
  • The common-envelope process is a complicated phase in binary evolution. A lot of effort has been dedicated to study the common-envelope stage, but many questions related to this process are yet to be answered. If one member of the binary survives the common-envelope phase, the binary will emerge as a white dwarf accompanied by a low-mass main sequence star in close orbit, often referred as a post common-envelope binary (PCEB). SDSS J0745+2631 is among the list of newly found PCEBs from the Sloan Digital Sky Survey (SDSS). This star is proposed to be a strong eclipsing system candidate due to the ellipsoidal modulation in its light curve. In this work, we aim to confirm the eclipsing nature of SDSS J0745+2631 and to determine the stellar and orbital parameters using the software Binary Maker 3.0 (BM3.0). We detected the primary eclipse in the light curve of SDSS J0745+2631 in our follow-up observation from January 2014 using the ULTRASPEC instrument at the Thai National Observatory. The data obtained on 7th and 8th January 2014 in g filter show an evident drop in brightness during the eclipse of the white dwarf, but this eclipse is less prominent in the data taken on the next night using a clear filter. According to our preliminary model, we find that SDSS J0745+2631 hosts a rather hot white dwarf with an effective temperature of 11500K. The companion star is a red dwarf star with a temperature of 3800K and radius of 0.3100 $R_{\odot}$. The red dwarf star almost fills its Roche lobe, causing a large ellipsoidal modulation. The mass ratio of the binary given by the Binary Maker 3.0 (BM3.0) model is M2/M1 = 0.33.

PULSATIONAL CHARACTERISTICS OF V1719 CYGNI WITH PECULIAR LIGHT CURVE

  • KIM CHULHEE;KIM SEUNG-LI;SADAKANE KOZO
    • Journal of The Korean Astronomical Society
    • /
    • v.26 no.2
    • /
    • pp.115-134
    • /
    • 1993
  • The light curve and radial velocity curve of multiperiodic dwarf cepheid VI719 Cyg (HD200925) with peculiar light curve have been reanalyzed in order to identify the oscillation modes to confirm the helium settling within the envelope. To do these, through the period search for the photometric and radial velocity data from the literature, two different periods were determined and the oscillation modes corresponding to the first and second periods were identified as the fundamental and first radial overtones. Hence the helium settling within the envelope was confirmed from the period ratio. The color excess, metallicity, effective temperature, and surface gravity corresponding to two different modes were determined and it was found that these parameters almost do not depend upon different oscillation mode. By utilizing the surface brightness method, we investigated the variation of angular diameter and radial displacement and it was found that the angular variation is very peculiar. Also by referring to the stellar models, mass and age were determined as $2.7M_{\bigodot}$ and 0.42 Gyr respectively which make this variable star heavier and younger than other multimode dwarf cepheids. Preliminary spectroscopic CCD observations were carried out and it was found that Mg in VI719 Cygni is nearly solar abundent according to the analysis of $5172.68{\AA}MgI$ line which is inconsistent with the photometric result. It was suggested that VI719 Cyg may be classified as a $\rho$ Pup stars according to the photometric characteristics.

  • PDF