• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.526-532
• /
• 2000

The uniaxial compressive strength of rock mass is known as the major factor in the assessment of drillability and the optimum excavation design in full-face tunnel excavation by TBM. Referring to worldwide cases, TBM has been applied mostly to the rock mass within the strength range of 80~250 MPa. Recently, a water way tunnel has been constructed as a part of Milyang dam project by TBM within the rock masses where the rock type is mainly granite with some granophyre, hornfels and andesite. Their uniaxial compressive strengths in extended area are estimated higher than 260 MPa. In this paper, the relation between the penetration rate and the rock mass properties is analyzed and TBM application to the very hard rocks is discussed. As a result that three suggestions to predict the TBM net penetration rate are analyzed, NTH method seems a better approach than other methods in the extremely hard rocks. NTH prediction matches with the results of actual values with the variations of 2~20%. Hardness measurement by Schmidt hammer and RMR estimation are carried out along the L = 5.3 km entire TBM tunnel alignment. The net penetration rate measured monthly is shown to be reciprocally proportional to Schmidt rebound hardness and RMR where coefficients of correlation, $R^2$are 0.705 and 0.777 respectively. As a result, they are good quantitative indices for the prediction of TBM net penetration rate in the extremely hard rocks. Magnitude of in-situ stress has a certain effect on TBM performance, and it is required to measure the in-situ stresses in TBM excavation design.

• Fire Science and Engineering
• /
• v.13 no.4
• /
• pp.38-55
• /
• 1999

In order practically to use fire-defective glazing materials for the compartment wall where a fire-protection rating is mandated, there have been many trials internationally, This research focuses on a feasibility that, if certain water film covered all surface of glass, the glazing system can endure without breaking out under the compartment fire. First of all, a water film spray system was specially designed to wet the entire surface of the glass and also to have tiny small amount of water rebounded from the surface after emitted from nozzles. After this system has proven to have perfect performance, small-scale tests were done to find out if the water film covered glazing system react to the high temperature curve in a small furnace room. Finally, on basis of the obtained data, full-scale experiments were done so that water-film covered glazing system can pass the Korean Standard (KS) test for fire resistance, KS F2257.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.651-663
• /
• 2012

Networked digital signage downloads necessary multimedia contents from a large-sized storage on WAN to its local disk of a limited size before starting their playback. If the required time to download the entire contents gets longer, a start time to play the contents at the digital signage could be delayed. In this paper, we propose a hybrid storage architecture that not only inserts an iSCSI storage layer between the existing local disk and the WAN storage, but offers a contents caching scheme in order to obtain all the necessary contents in digital signage rapidly. The proposed caching scheme determines how to place the downloaded contents both in the local disk and the iSCSI storage. Uniquely, the proposed caching scheme manages the iSCSI storage space by dividing it into two regions: (1) in one region, the digital signage can play the contents directly without downloading them into the local disk; (2) in the other region, the digital signage cannot. Performance evaluations on a simulator and an actual system with workloads of various contents show that a contents-downloading time of the hybrid storage architecture is at maximum three times shorter than that of the existing storage architecture.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.1
• /
• pp.47-53
• /
• 2001

Objective : This study was undertaken to evaluate operative results and prognosis according to preoperative clinical status and histopathological finding of spinal cord tumor. Methods : We analyzed of clinical feature, tumor location, histopathologic finding, operative results and prognosis in 55 patients with spinal cord tumor during last 10 years. Results : 1) The incidence of spinal cord tumors varies with the age of affected patients who are 2 to 75 years of age. Peak incidences were in the 5th & 7th decade of life, and the ratio of male to female was 1.2:1. 2) The most common histopathologic type was neurinoma(41.9%). 3) The tumors were located most frequently in the thoracic area(22 cases, 40.0%) and in the intradural extramedullary space(30 cases, 54.5%). 4) The most common initial clinical feature was pain in 20 cases(36.4%). For neurologic status on admission, 30 cases(54.5%) showed motor disturbance. 5) In radiologic studies, there were abnormal finding in 21 cases from plain X-rays among 37 cases. The entire 20 cases in when myelography was done showed subarachnoid blockade, either complete or incomplete. The magnetic resonance imaging, regard as the most accurate diagnostic method, revealed the exact location of the tumor and the relationship of the tumor with the adjacent anatomical structure. 6) The total removal was possible in 36 cases(65.5%), subtotal removal in 17 cases(30.9%) and biopsy in 2 cases (3.6%). Nineteen cases(90.5%) among 21 cases with preoperative radiculopathy group showed recovery or improvement, where as only 11 cases(36.7%) among 30 cases with preoperative motor weakness group showed recovery or improvement, with statistically significant difference(p<0.01). Pathologically, 26 cases(83.9%) among 31 cases of neurinoma and meningioma showed postoperative recovery or improved, but only 1 case(6.3%) among 16 cases of metastatic tumor, astrocytoma and ependymoma recovered. Postoperative complication noted in 5 cases(9.1%), and were noted postoperative hematoma, pneumonia, pulmonary edema and spinal cord infarction. Conclusion : Preoperative neurologic status and histopathologic finding are considered important factors of Postoperative outcome in patients with spinal cord tumor.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.441-450
• /
• 2010

Recently, a lot of interest is increased in sensor network which gathers various data through many sensor nodes deployed in wired and wireless network environment. However, because of the limitation in memory, computation, and energy of the sensor nodes, security problem is very important issue. In sensor network, not only the security problem, but also computing power should be seriously considered. In this paper, considering these characteristics, we make the sensor network consist of normal sensor nodes and clusterheaders with enough space and computing power, and propose a group key rekeying scheme adopting PCGR(Predistribution and local Collaborationbased Group Rekeying) for secure group communication. In our proposal, we enhance the security by minimizing the risk to safety of the entire network through verifying the new key value from clusterheader by sensor nodes. That is, to update the group keys, clusterheaders confirm sensor nodes through verifying the information from sensor nodes and send the new group keys back to authentic member nodes. The group keys sent back by the clusterheaders are verified again by sensor nodes. Through this mutual authentication, we can check if clusterheaders are compromised or not. Qualnet simulation result shows that our scheme not only guarantees secure group key rekeying but also decreasesstorage and communication overhead.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.475-486
• /
• 2020

Climate change scenarios are the basis of research to cope with climate change, and consist of large-scale spatio-temporal data. From the data point of view, one scenario has a large capacity of about 83 gigabytes or more, and the data format is semi-structured, making it difficult to utilize the data through means such as search, extraction, archiving and analysis. In this study, a tool for analyzing extreme climate events based on spatial information is developed to improve the usability of large-scale, multi-period climate change scenarios. In addition, a pilot analysis is conducted on the time and space in which the heavy rain thresholds that occurred in the past can occur in the future, by applying the developed tool to the RCP8.5 climate change scenario. As a result, the days with a cumulative rainfall of more than 587.6 mm over three days would account for about 76 days in the 2080s, and localized heavy rains would occur. The developed analysis tool was designed to facilitate the entire process from the initial setting through to deriving analysis results on a single platform, and enabled the results of the analysis to be implemented in various formats without using specific commercial software: web document format (HTML), image (PNG), climate change scenario (ESR), statistics (XLS). Therefore, the utilization of this analysis tool is considered to be useful for determining future prospects for climate change or vulnerability assessment, etc., and it is expected to be used to develop an analysis tool for climate change scenarios based on climate change reports to be presented in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.143-150
• /
• 2018

Periodic and systemic disaster management has become more important than ever owing to the recent continuous occurrence of disasters, such as fires, earthquakes, and flooding. This management goes beyond simple disaster preparedness, which was introduced minimally under the existing legal system. For effective disaster management, facilities should be managed through regular maintenance on a daily basis, and in the case of an emergency, intuitive and accurate communication is essential regarding the situation and purpose. BIM manages the entire building property data using the effective 3D visualization model, so it can be used for various management purposes from design to facility maintenance. In this study, through an expert survey on the use of services in a BIM-based integrated disaster information system, the available areas of BIM data were organized in terms of facility information management, 3D visualization, and disaster control. Later, through the use service and DB definition within the BIM-based disaster integration information system, the main facilities monitoring and response services based on BIM and BIM-based spatial management service are proposed. Based on this study, it is hoped that the BIM-based application service functions within the system will be implemented to enable an effective system response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.496-503
• /
• 2020

The regeneration of Incheon Inner Port is a recent, representative case of conflict related to urban policies. This study aimed to analyze the conflicts that have arisen during the urban regeneration process. This study was a qualitative study, and the conflict management strategy was derived by analyzing the conflict process, subject, and content. The results of the analysis are as follows. First, central governmental agencies have proposed a clear plan that is mainly focused on the port redevelopment project through the participation of private sector businesses. Second, Incheon is pursuing a new vision called "Creative City" with specific urban regeneration. Third, the Incheon Port Authority is required to maximize the efficiency of the regeneration projects. Fourth, organizations such as port logistics companies and port trade unions are demanding the use of port space. Fifth, local residents and civic groups insist that the entire Inner Harbor should be returned to the citizens. Therefore, the establishment of city planning and administrative guidelines is necessary to manage Incheon Inner Harbor and surrounding areas in a desirable manner in order to develop a regeneration philosophy for Incheon Inner Harbor. Furthermore, the establishment of cooperative governance is required for the participation of various stakeholders.

• Journal of the Korean Regional Science Association
• /
• v.35 no.4
• /
• pp.33-45
• /
• 2019

Due to the global low growth trend, urban shrinkage is a major issue of urban policy in major industrialized countries. According to the research results of the KRIHS(Korea Research Institute for Human Settlements, 2016), 23 out of 77 cities in Korea were diagnosed as continuous or temporary shrinking cities. However, the criterion for diagnosing shrinking cities remain on the simple demographic side, and the spatial shrinkage pattern of the city is not considered. Therefore, this study diagnosed urban shrinkage phenomenon considering the characteristics of Yeong-ju, a poly-centric city, by using the population gradient curve, which is one of the urban spatial structure analysis methods. As a result of the diagnosis, Yeong-ju turned out to be a shrinking city with the population density and the slope of population density increasing. In the case of area of Dong, a sprawl phenomenon in which the population density of the CBD and the slope of the population density were decreased was shown. And in the case of Punggi-eup, a simple shrinkage phenomenon in which only the population density of the CBD was decreased was shown. The results show that even within a city, the pattern of spatial change can be different for each centers. In the case of a city with a poly-centric structure, the implications for the individual diagnosis of not only the entire city but also the detailed area were drawn.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.429-440
• /
• 2008

As embedded system becomes more complex, software development becomes more important in the entire design process. Most embedded applications consist of multi -tasks, that are executed in parallel. So, dataflow model that expresses concurrency naturally is preferred than sequential programming language to develop multitask software. For the execution of multitasking codes, operating system is essential to schedule multi-tasks and to deal with the communication between tasks. But, it is needed to execute multitasking code without as when the target hardware platform cannot execute as or target platforms are candidates of design space exploration, because it is very costly to port as for all candidate platforms of DSE. For this reason, we propose the serialized multitasking code generation technique from dataflow specification. In the proposed technique, a task is specified with dataflow model, and generated as a C code. Code generation consists of two steps: First, a block in a task is generated as a separate function. Second, generated functions are scheduled by a multitasking scheduler that is also generated automatically. To make it easy to write customized scheduler manually, the data structure and information of each task are defined. With the preliminary experiment of DivX player, it is confirmed that the generated code from the proposed framework is efficiently and correctly executed on the target system.