• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.629-635
• /
• 2012

This study was conducted to evaluate the removal behaviors of DOM(dissolved organic matter) and phosphorus in eutrophic lake water by coagulation process with PAC(powdered activated carbon). It was observed that the removal characteristic of soluble matter was different from that of dissolved one, and the removal of DOM was effected by both pH and coagulant dosage. It was founded that PAC could increase the removal efficiency by an adsorption of DOM in coagulation process. A formation of soluble and colloidal matters resulted in the degradation of phosphorus removal efficiency in a chemical precipitation process. The phosphorus removal efficiency could be enhanced by an absorption of colloidal matter and dissolved complex with PAC addition. In addition, the PAC addition caused the increase of floc density in coagulation process, that led to the rise of sedimentation rate, and resulted in a significant improvement of solid-liquid separation efficiency.

• Environmental Engineering Research
• /
• v.16 no.3
• /
• pp.149-157
• /
• 2011

Nanofiltration (NF) experiments were conducted to investigate fouling of Al-hydroxide precipitate and the influence of organic compound, inorganic compound, and their combination, i.e., multiple foulants. $CaCl_2$ and $MgSO_4$ were employed as surrogates of inorganic compounds while humic acid was used as surrogate of organic compound. The flux attained from NF experiments was fitted with the mathematical fouling model to evaluate the potential fouling mechanisms. Al-hydroxide fouling with a cake formation mechanism had little effect on the NF membrane fouling regardless of the Al concentration. The NF fouling by Al-hydroxide precipitate was deteriorated in presence of inorganic matter. The effect of Mg was more critical in increasing the fouling than Ca. This is because the Mg ions enhanced the resistances of the cake layer accumulated by the Al-hydroxide precipitate on the membrane surfaces. However, the fouling with Mg was dramatically mitigated by adding humic acid. It is interesting to observe that the removal of the conductivity was enhanced to 61.2% in presence of Mg and humic acid from 30.9% with Al-hydroxide alone. The influence of dissolved matter (i.e., colloids) was more negative than particulate matter on the NF fouling for Al-hydroxide precipitate in presence of inorganic and organic matter.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Biomolecules & Therapeutics
• /
• v.4 no.2
• /
• pp.184-189
• /
• 1996

General pharmacological studies of LB20304a (a mesylate salt form of a new quinolone antibiotic LB20304 following oral administration of 300 mg/kg and 1000 mg/kg, almost maximum tolerance dose in mice and rat, respectively, were performed in terms of effects on general behaviour, central nervous system, gastrointestinal system, and blood coagulation system in mice and rats. With regards to general behaviour of mice, at oral dose of 300 mg/kg, LB20304a reduced muscle tone and locomotor activity. In terms of CNS, at oral treatment of 300 mg/kg, LB20304a showed some analgesic effects in mice, and oral dose of 1000 mg/kg caused drop in normal body temperature of rat, while it enhanced the pentylenetetrazole-induced clonic convulsion to tonic convulsion and/or death in mice at the doses of unto 300 mg/kg. In addition, LB20304a increased hexobarbital-induced sleeping time two and three times in mice at oral doses of 20 mg/kg and 300 mg/kg, respectively. Rota-rod and traction test in mice were not influenced by the dose of 300 mg/kg and 200 mg/kg, respectively. LB20304a reduced gastric secretion of rat at dose of 1000 mg/kg, and increased intestinal motility of mice at dose of 300 mg/kg. In rats, blood coagulation index, such as PT (prothrombin time) and aPTT (activated partial thromboplastin time) were not affected by the treatment of upto 1000 mg/kg of LB 20304a.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.17-22
• /
• 1997

Casein was chemically modified with acetic, succinic, and maleic anhydride and changes in functional pro-perties were evaluated as affected by the degree of modification. Chemical modification resulted in casein with unique functional properties depending upon the type of anhydrid used and the degree of modification. It was possible to control heat coagulation, calcium precipitability, forming and emulsion capacity and stability. At pH 4.5 heat coagulation was 0% in the case 74.1% acetylated casein; on the contrary, succinylation and maleyation resulted in highly heat sensitive protein. Foaming properties were improved markedly by suc-cinylation and maleylation at pH 4.5. However, emulsifying properties were enhanced only by maleylation.

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.42-48
• /
• 1992

The rate and extent of coagulation of milk using fast acidification with 0.1 N HCl were monitored by changes in viscosity and turbidity at various temperatures and pH. Also the gelation rate of milk using slow acidification with D-glucono-${\delta}$-lactone was measured in a small strain rheological scanner. Coagulation of milk casein occurred in a specific pH range and was accompanied by an abrupt increase in viscosity at pH 5.0. Acid coagulation rate was enhanced by increasing temperature from $20^{\circ}C{\sim}50^{\circ}C$, and the maximum rate was shown around pH 5.0. The addition of salt ($CaCl_{2}$) reduced the maximum coagulation rate at all temperature ranges and shifted the pH ranges for maximum coagulation rate and the onset pH of coagulation. The onset of gelation and the rate of network formation during slow acidification were facilitated by Cl ion, but suppressed by SCN-ion, as indicated by the rate of rigidity development. The susceptibility to syneresis was greater in the gel made at lower temperature and around pH 4.6, while preheated milk at $90^{\circ}C$ for 5 min prior to acidification showed the same syneresis profile at all heating temperatures ($60{\sim}90^{\circ}C$).

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.411-416
• /
• 2009

This study was initiated to improve the cooling water quality by chemical coagulation and sedimentation in steel mills. Due to the inefficient flocculation in the settling tanks of blast furnace cooling water systems, the solid particles in the cooling water overflow accumulate and clog the cooling system. To protect the cooling water system from such fouling, proper flocculants must be continuously used. Laboratory tests were performed for the indirect cooling water system of a plate mill. The batch test in the gas scrubbing cooling water system of a blast furnace showed that the proposed coagulant was more effective for the improvement of coagulation and sedimentation than the existing one. During the tests, cationic flocculants were more effective than use of only an anionic flocculant. The suggested combination of anionic and cationic flocculants can probably improve the turbidity removal efficiency of the cooling water. Proper control of the overflow rate by the designed residence time would help turbidity removal efficiency in the settling tank. In addition, the settling can be enhanced by adopting rapid and slow mixing alternatively. Scale problems in blast furnace cooling water system were reduced to some extent by efficient settling.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.590-596
• /
• 2012

Enhanced coagulation is best available technologies to treat NOM in water to produce clean drinking water. In this research, the comparison experiments between conventional coagulation (CC) and enhanced coagulation (EC) using 4 type coagulants i.e., ferric chloride, aluminium sulphate (alum), poly aluminium sulphate organic magnesium (PSOM) and poly aluminium chloride (PACl) were performed in terms of surrogate parameters such as dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), haloacetic acid formation potential (HAAFP) and zeta potential variation in order to find out the most effective coagulant and conditions to fit Nakdong River water. When applied to EC process, the turbidity removal efficiency did not increased gradually compared to the CC process when adding coagulants. Furthermore, the removal efficiency of turbidity became decreased much more as coagulants were added increasingly whereas the removal efficiency of DOC, THMFP and HAAFP became increased by 13~18%, 9~18% and 9~18% respectively compared to the CC process. The characteristics of turbidity removal showed relatively high removal efficiency considering the pH variation in entire pH range when using $FeCl_3$ and PACl. Additionally, in case of alum and PSOM steady removal efficiency was shown between pH 5 and pH 8. In terms of DOC surrogate the coagulants including 4 type coagulants indicated high removal efficiency between pH 5 and pH 7. The removal efficiency of dissolved organic matter (DOM) in EC between less than 1 kDa and more than 10 kDa augmented by 11~21% and 16% respectively compared to the CC process. The removal efficiency of hydrophobic and hydrophilic organic matter proved to be increased by 27~38% and 11~15% respectively. In conclusion, the most effective coagulant relating to EC for Nakdong River water was proved to be $FeCl_3$ followed by PSOM, PAC and alum in order.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.503-511
• /
• 2008

An edible marine red alga, Grateloupia filicina, collected from Jeju Island of Korea was hydrolyzed by cheap food-grade carbohydrases (Viscozyme, Celuclast, AMC, Termamyl, and Ultraflo) to investigate its anticoagulant activity. Among the tested enzymatic extracts of G. filicina, a Termamyl extract showed the highest anticoagulant activity. Anion-exchange chromatography on DEAE-cellulose and gel-permeation chromatography on Sepharose-4B were used to purify the active polysaccharide from the crude polysaccharide fraction of G. filicina. The purified sulfated polysaccharide (0.42 sulfate/total sugar) showed ${\sim}1,357kDa$ molecular mass and was comprised mainly of galactose(98%) and 1-2% of glucose. The sample showed potential anticoagulant activity on activated partial thromboplastin time (APTT) thrombin time (TT) assays. The purified G. filicina anticoagulant (GFA) inhibited the coagulation factor X (92%), factor II (82%), and factor VII (68%) of the coagulation cascade, and the molecular interaction (protein-polysaccharide) was highly enhanced in the presence of ATIII (antithrombin III). The dissociation constant of polysaccharide towards serine proteins decreased in the order of FXa (58.9 nM) >FIIa (74.6 nM) >FVII (109.3 nM). The low/less cytotoxicity of the polysaccharide benefits its use in the pharmaceutical industry; however, further studies that would help us to elucidate the mechanism of its activity are needed.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2009

PES (polyethersulfone) membranes with highly enhanced their asymmetry were prepared by phase inversion process. The membranes were prepared by using PES/DMF (N,N-dimethylformamide)/TSA (p-toluenesulfonic acid)/PVP (polyvinylpyrrolidone) casting solution and water coagulant. The pre-coagulation of membrane surface which was induced by an addition of TSA as a demixing agent and PVP as a swelling polymer in the PES solution and humid exposure time, played a crucial role in determining morphological properties and the PWP (pure water permeation) performance. The PES solution was coated on polyester film under condition of 80% humidity for a while ($72{\sim}144$ sec) before immersing in a coagulation bath. The characterization of membranes was carried out by a capillary flow porometer, a FE-SEM and a permeation test apparatus. As the thickness of the smallest pore size layer (SPL) decreased, the asymmetry of membrane increased under conditions of 20 wt% of TSA and 10 wt% of PVP in 11 wt% of PES solution during longer humid contact time. As a result, the membranes showed a remarkable increase of PWP.