• 한국습지학회지
• /
• 제14권4호
• /
• pp.629-635
• /
• 2012

본 연구는 부영양화 호소의 개선을 위하여 분말활성탄 공정을 적용하고 호소수 내의 용존 유기물과 인의 제거특성을 파악하고자 수행되었다. 용존 유기물의 제거특성은 부유물질의 제거특성과 다르며 응집제 주입량과 pH에 영향을 받음을 확인하였다. 용존 유기물은 분말활성탄에 의해 흡착으로 제거되며 응집과정에서 용존 유기물의 제거효율을 증가시킬 수 있었다. 응집침전공정의 인 제거 과정과 같은 화학침전과정에서 형성되는 용존성 착화합물과 콜로이드성 물질은 인의 제거효율을 저하시키는 요인이다. 분말활성탄의 주입으로 콜로이드성 물질과 용존성 착화합물을 흡착함으로써 인의 제거효율을 증가시킬 수 있었다. 또한 분말활성탄은 응집과정의 floc의 밀도를 증가시켜 침전속도를 높이고 고액분리 효율을 높일 수 있었다.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.149-157
• /
• 2011

Nanofiltration (NF) experiments were conducted to investigate fouling of Al-hydroxide precipitate and the influence of organic compound, inorganic compound, and their combination, i.e., multiple foulants. $CaCl_2$ and $MgSO_4$ were employed as surrogates of inorganic compounds while humic acid was used as surrogate of organic compound. The flux attained from NF experiments was fitted with the mathematical fouling model to evaluate the potential fouling mechanisms. Al-hydroxide fouling with a cake formation mechanism had little effect on the NF membrane fouling regardless of the Al concentration. The NF fouling by Al-hydroxide precipitate was deteriorated in presence of inorganic matter. The effect of Mg was more critical in increasing the fouling than Ca. This is because the Mg ions enhanced the resistances of the cake layer accumulated by the Al-hydroxide precipitate on the membrane surfaces. However, the fouling with Mg was dramatically mitigated by adding humic acid. It is interesting to observe that the removal of the conductivity was enhanced to 61.2% in presence of Mg and humic acid from 30.9% with Al-hydroxide alone. The influence of dissolved matter (i.e., colloids) was more negative than particulate matter on the NF fouling for Al-hydroxide precipitate in presence of inorganic and organic matter.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Biomolecules & Therapeutics
• /
• 제4권2호
• /
• pp.184-189
• /
• 1996

General pharmacological studies of LB20304a (a mesylate salt form of a new quinolone antibiotic LB20304 following oral administration of 300 mg/kg and 1000 mg/kg, almost maximum tolerance dose in mice and rat, respectively, were performed in terms of effects on general behaviour, central nervous system, gastrointestinal system, and blood coagulation system in mice and rats. With regards to general behaviour of mice, at oral dose of 300 mg/kg, LB20304a reduced muscle tone and locomotor activity. In terms of CNS, at oral treatment of 300 mg/kg, LB20304a showed some analgesic effects in mice, and oral dose of 1000 mg/kg caused drop in normal body temperature of rat, while it enhanced the pentylenetetrazole-induced clonic convulsion to tonic convulsion and/or death in mice at the doses of unto 300 mg/kg. In addition, LB20304a increased hexobarbital-induced sleeping time two and three times in mice at oral doses of 20 mg/kg and 300 mg/kg, respectively. Rota-rod and traction test in mice were not influenced by the dose of 300 mg/kg and 200 mg/kg, respectively. LB20304a reduced gastric secretion of rat at dose of 1000 mg/kg, and increased intestinal motility of mice at dose of 300 mg/kg. In rats, blood coagulation index, such as PT (prothrombin time) and aPTT (activated partial thromboplastin time) were not affected by the treatment of upto 1000 mg/kg of LB 20304a.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.17-22
• /
• 1997

Casein was chemically modified with acetic, succinic, and maleic anhydride and changes in functional pro-perties were evaluated as affected by the degree of modification. Chemical modification resulted in casein with unique functional properties depending upon the type of anhydrid used and the degree of modification. It was possible to control heat coagulation, calcium precipitability, forming and emulsion capacity and stability. At pH 4.5 heat coagulation was 0% in the case 74.1% acetylated casein; on the contrary, succinylation and maleyation resulted in highly heat sensitive protein. Foaming properties were improved markedly by suc-cinylation and maleylation at pH 4.5. However, emulsifying properties were enhanced only by maleylation.

• 한국식품과학회지
• /
• 제24권1호
• /
• pp.42-48
• /
• 1992

0.1N HCl 이용하여 빠른 산성화를 시켰을 때에 우유의 응고속도와 그 정도는 온도와 pH에 따른 점도 변화와 혼탁도 변화로서 측정하였고, DGL을 이용하여 천천히 산성화 시켰을 때에 우유의 겔화 과정은 rheological scanner로서 측정하였다. 우유의 겔화 과정은 rheological scanner로서 측정하였다. 우유 casein의 응고는 pH 5.0에서의 돌연한 점도증가로서 나타났으며 산에 의한 응고형성의 기점 pH로 삼았다. 산에 의한 응고속도는 $20^{\circ}C$에서 $50^{\circ}C$로 온도가 높아질수록 빨라졌고 최대 응고속도는 pH5.0에서 일어났다. 염($CaCl_{2}$)의 첨가는 모든 온도범위에서 최대 응고속도를 감소시켰으며 응고가 시작되는 pH 및 최대 응고속도가 일어나는 pH를 변화시켰다. 천천히 산성화 동안에 생성되는 겔의 초기 형성 시간과 조직 형성속도는 Cl 이온에 의해 촉진되고 SCN 이온에 의해 억제되었다. 겔에서 생겨나는 syneresis 현상은 저온으로 갈수록, pH가 4.6에 접근할수록 심했으며, $90^{\circ}C$에서 5분 동안 열처리한 우유에서는 가열온도($60{\sim}90^{\circ}C$)에 상관없이 일정하게 나타났다.

• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.411-416
• /
• 2009

This study was initiated to improve the cooling water quality by chemical coagulation and sedimentation in steel mills. Due to the inefficient flocculation in the settling tanks of blast furnace cooling water systems, the solid particles in the cooling water overflow accumulate and clog the cooling system. To protect the cooling water system from such fouling, proper flocculants must be continuously used. Laboratory tests were performed for the indirect cooling water system of a plate mill. The batch test in the gas scrubbing cooling water system of a blast furnace showed that the proposed coagulant was more effective for the improvement of coagulation and sedimentation than the existing one. During the tests, cationic flocculants were more effective than use of only an anionic flocculant. The suggested combination of anionic and cationic flocculants can probably improve the turbidity removal efficiency of the cooling water. Proper control of the overflow rate by the designed residence time would help turbidity removal efficiency in the settling tank. In addition, the settling can be enhanced by adopting rapid and slow mixing alternatively. Scale problems in blast furnace cooling water system were reduced to some extent by efficient settling.

• 대한환경공학회지
• /
• 제34권9호
• /
• pp.590-596
• /
• 2012

고도응집 공정은 DBP 전구물질인 NOM을 제거하는 최적기법이다. 본 연구에서는 낙동강 원수를 대상으로 $FeCl_3$, alum, PSOM 및 PACl 응집제를 대상으로 고도응집 공정의 적용시 가장 효과적인 응집제와 응집조건을 DOC, THMFP, HAAFP 및 제타전위 변화를 중심으로 평가하였다. 탁도 제거율은 고도응집을 적용시 기존응집에 비해 제거율의 상승은 없었으며, 일정 응집제 주입량 이상에서는 제거율이 더욱 저하되었으나 DOC, THMFP 및 HAAFP 제거율은 응집제 종류별로 기존응집에 비해 각각 13~18%, 9~18% 및 9~18% 정도 증가하였다. 응집 pH 변화에 따른 탁도 제거특성은 $FeCl_3$와 PACl이 pH 4~10 범위에서 비교적 높은 탁도 제거율을 나타내었고 alum과 PSOM의 경우는 pH 5~8의 범위에서 안정적인 제거율을 나타내었다. DOC는 4종의 응집제 모두 pH 5~7 범위에서 안정적인 제거율을 나타내었다. 고도응집 공정을 적용시 1 kDa 이하 및 10 kDa 이상의 용존 유기물질의 제거율은 각각 11~21% 및 16% 정도 기존응집 공정에 비해 증가하였으며, 소수성 및 친수성 유기물질의 제거율은 각각 27~38% 및 11~15% 정도 증가하였다. 낙동강 원수의 고도응집에 가장 효과적인 응집제로는 $FeCl_3$로 나타났으며, 다음으로 PSOM, PACl 및 alum 순이었다.

• Journal of Microbiology and Biotechnology
• /
• 제18권3호
• /
• pp.503-511
• /
• 2008

An edible marine red alga, Grateloupia filicina, collected from Jeju Island of Korea was hydrolyzed by cheap food-grade carbohydrases (Viscozyme, Celuclast, AMC, Termamyl, and Ultraflo) to investigate its anticoagulant activity. Among the tested enzymatic extracts of G. filicina, a Termamyl extract showed the highest anticoagulant activity. Anion-exchange chromatography on DEAE-cellulose and gel-permeation chromatography on Sepharose-4B were used to purify the active polysaccharide from the crude polysaccharide fraction of G. filicina. The purified sulfated polysaccharide (0.42 sulfate/total sugar) showed ${\sim}1,357kDa$ molecular mass and was comprised mainly of galactose(98%) and 1-2% of glucose. The sample showed potential anticoagulant activity on activated partial thromboplastin time (APTT) thrombin time (TT) assays. The purified G. filicina anticoagulant (GFA) inhibited the coagulation factor X (92%), factor II (82%), and factor VII (68%) of the coagulation cascade, and the molecular interaction (protein-polysaccharide) was highly enhanced in the presence of ATIII (antithrombin III). The dissociation constant of polysaccharide towards serine proteins decreased in the order of FXa (58.9 nM) >FIIa (74.6 nM) >FVII (109.3 nM). The low/less cytotoxicity of the polysaccharide benefits its use in the pharmaceutical industry; however, further studies that would help us to elucidate the mechanism of its activity are needed.

• 멤브레인
• /
• 제19권1호
• /
• pp.25-33
• /
• 2009

PES/DMF/TSA/PVP 고분자용액을 물에 침지시 시키는 상전이 공정을 통하여 비대칭성이 향상된 PES 멤브레인을 제조하였다. PES (polyethersulfone) 용액에 응고제 (p-toluenesulfonic acid, TSA)와 습윤제 고분자 (polyvinylpyrrolidone, PVP)의 첨가와 습윤 상태에 노출 시간으로 일어나는 멤브레인 표면의 pre-coagulation 현상은 멤브레인의 구조적 특성과 투과량 특성에 있어 중요한 역할을 한다. PES 용액은 폴리에스터 필름에 코팅된 후 약 $72{\sim}144$초 동안 80%의 습도하에서 공기에 노출된 후 응고조에 침지되었다. Capillary flow porometer, FE-SEM과 수투과 평가장치를 통하여 멤브레인의 특성을 살펴보았다. TSA 20 wt%와 PVP 10 wt%가 첨가된 11 wt%의 PES 용액에서 멤브레인 구조의 비대칭성이 크게 향상되었으며 최소 기공충의 두께도 얇아짐을 볼 수 있었다. 그 결과로 수투과량에 큰 증가를 가져옴을 볼 수 있었다.