• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2007

Hard turning on modern lathes becomes a realistic replacement for many grinding applications. Because CBN tools are expensive, excessive tool wear can eliminate economic advantages of hard turning. This paper describes a study of investigating the cutting force and the characteristics of tool wear in hard turning of hardened steels, AISI 52100. Cutting forces generated using CBN tools have been evaluated. The radial thrust cutting force was the largest among three cutting force components. It increased dramatically as a result of progressive tool wear. On the other hand, the result shows significantly different wear characteristics between high CBN and low CBN. Backpropagation neural network was used for the estimation of tool wear. The networks were achieved the reliability of 96.3% even when the spindle speed and feed rate are changed.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.17-25
• /
• 2017

In this paper, we compared four analyzers Clang, CppCheck, Compass, and a commercial one from a domestic startup using the NIST's Juliet test suit and STONESOUP that is introduced recently. Tools showed detection efficacy in the order of Clang, CppCheck, the domestic one, and Compass under Juliet tests; and Clang, the domestic one, Compass, and CppCheck under STONESOUP tests. We expect it would be desirable to utilize symbolic execution for vulnerability analysis in the future. On the other hand, the results of tool evaluation also testifies that Juliet and STONESOUP as a benchmark for static analysis tools can reveal differences among tools. Finally, each analyzer has different CWEs that it can detect all given test programs. This result can be used for selection of proper tools with respect to specific CWEs.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1181-1186
• /
• 2005

In many construction projects, progress and efficiency are hampered by poor communication of discipline-specific models. For example, architects use 2D or 3D CAD models and builders use CPM diagrams, Gantt charts, and spreadsheets to show their view of the project. Nowadays, advanced computer visualization tools, 4D CAD or VR, can show these disparate models to understand cross-disciplinary impacts of design and construction decisions. In Korea, several leading companies have tried to apply these tools to their pilot projects from the design phase to the maintenance phase. These companies have expected that more project stakeholders could understand a construction schedule more quickly and completely with 4D visualization than with the traditional construction management tools. However, modeling of the 4D CAD or VR can be quite time-consuming and expensive to generate manually and has therefore limited the spread and use of these models. In order to adopt widely those models in construction industry, the areas that those tools could support to take large benefits in diverse functional areas of construction management need to be analyzed. In this study, researchers analyze the usefulness and limitations of the 4D models and VR in the construction industry, develop the strategy of application priority, and improve the 4D modeling method.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.81-88
• /
• 2014

A number of screening tools have been developed to evaluate the human balance capability. Many of them were designed to identify the elderly with falling risk. Three different screening tools, which have been well used many clinical fields, were used in this study. The purpose of this study was to evaluate balance capability in facilities maintenance workers in korea. There were no statistical significance between male and female when evaluated with three different screening tools. However, significant differences were found among the age groups irrespective of gender when evaluated with three different screening tools. The results of three different screening tools in korea showed poor values compared with previous results. These results revealed that facilities maintenance workers faced more critical falling risk in korea.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.79-85
• /
• 2007

Intelligent machines respond to external environments on the basis of decisions that are made by sensing the changes in the environment and analyzing the obtained information. This study focuses on the construction of a knowledge base which enables decision making with that information. Approximately 70% of all errors that occur in machine tools are caused by thermal error. In order to proactive deal with these errors, a system which measures the temperature of each part and predicts and compensates the displacement of each axis has been developed. The system was built in an open type controller to enable machine tools to measure temperature changes and compensate the displacement. The construction of a machining knowledge base is important for the implementation of intelligent machine tools, and is expected to be applicable to the network based intelligent machine tools which look set to appear sooner or later.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.387-396
• /
• 2004

In order to keep and increase a competitive potential, industrial enterprises have to reduce their costs for product development as well as shorten lead time in product development processes. Moreover they have to respond to market factors and conditions such as increasing demands for functionality and individuality of products, short product life cycles, high pressure on prices and time to market. The improved functional requirement in connection with high time and cost pressure lead to high risk in product development. Technological fine improvements in connection with high time and cost pressure lead to high development risk. To cope with these challenges many enterprises have to collaborate globally. The collaborative engineering in product development is aimed to create distributed collaborative corporations and to facilitate the management of design conflicts. This paper provides a methodology for analyzing collaborative design process as well as the tools and the framework to support collaborative product development. The methodology can identify the interdependences among design tasks and teams. The tools and framework are implemented to facilitate the management of product development process.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.489-493
• /
• 2012

Automatic tool changers(ATCs) store tools used in a machining center to its magazine and changes the tools automatically. Tools of machine centers are changed and then precisely equipped to spindle system by the ATC. Therefore, the stability and reliability of the ATC is very important. But, there is lack of development and evaluation on basic performance and vibration of the ATCs. So, in this study, a BT40 ATC test bench was developed to verify stability and reliability of BT40 ATCs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.175-178
• /
• 2010

Public institutions and owners have been introduced to use Building Information Modeling (BIM) tools. Learning BIM becomes an important factor in design process of undergrad program. The purpose of this study is to demonstrate an integrated architectural engineering design process using BIM tools. BIM education programs are analyzed to compare the level of detail in BIM education. An architectural engineering design class needs to involve BIM to introduce integrated process. An architectural engineering design process needs be based on understanding design, building structure, construction and building services. 3D Modeling helps understanding a building structure and checking environment-friendly element analysis. As a result of this research, new process of design education is proposed under four issues.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.8-15
• /
• 2011

The computer-based simulation tools are currently used overwhelmingly to simulate the performance of automotive designs. Then, the search for an optimal solution that satisfies a number of performance requirements usually involves numerous iterations among several simulation tools. Therefore, meta-modeling techniques are becoming widely used to build approximations of computationally expensive computer analysis tools. The set-based approach proposed in the first report of a four-part paper has been a test bed for the innovation of vehicle structure design process in the Structural Design and Fabrication Committee of JSAE(Society of Automotive Engineers of Japan). In the second report, the proposed design approach is illustrated with a side-door impact beam design example using meta-modeling techniques.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.413-414
• /
• 2008