• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.837-846
• /
• 2004

This paper presents a screening technique for greatly reducing the computation involved in determining the optimal location and types of Flexible AC Transmission System (FACTS) devices in a large power system. The first-order sensitivities of the generation cost for various FACTS devices are derived. This technique requires solving only one optimal power flow (OPF) to obtain sensitivities with respect to FACTS device control variables for every transmission line To implement a sensitivity-based screening technique, we used a new UPFC model, which consists of an ideal transformer with a complex turns ratio and a variable shunt admittance. A S-bus system based on the IEEE 14-bus system was used to illustrate the technique.

• ETRI Journal
• /
• 제40권5호
• /
• pp.677-686
• /
• 2018

A novel data hiding technique based on modified histogram shifting that incorporates multi-bit secret data hiding is proposed. The proposed technique divides the image pixel values into embeddable and nonembeddable pixel values. Embeddable pixel values are those that are within a specified limit interval surrounding the peak value of an image. The limit interval is calculated from the number of secret bits to be embedded into each embeddable pixel value. The embedded secret bits can be perfectly extracted from the stego image at the receiver side without any overhead bits. From the simulation, it is found that the proposed technique produces a better quality stego image compared to other data hiding techniques, for the same embedding rate. Since the proposed technique only embeds the secret bits in a limited number of pixel values, the change in the visual quality of the stego image is negligible when compared to other data hiding techniques.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.937-945
• /
• 2014

This paper presents an optimized space vector pulse-width modulation (OSVPWM) technique for a five-level cascaded H-bridge (CHB) inverter. The space vector diagram of the five-level CHB inverter is optimized by resolving it into inner and outer two-level space vector hexagons. Unlike conventional space vector topology, the proposed technique significantly reduces the involved computational time and efforts without compromising the performance of the five-level CHB inverter. A further optimized (FOSVPWM) technique is also presented in this paper, which significantly reduces the complexity and computational efforts. The developed techniques are verified through MATLAB/SIMULINK. Results are compared with sinusoidal pulse-width modulation (SPWM) to prove the validity of the proposed technique. The proposed simulation system is realized by using an XC3S400 field-programmable gate array from Xilinx, Inc. The experiment results are then presented for verification.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1482-1488
• /
• 2014

The reliability evaluation of the electrical distribution networks (EDN) requires sufficient consideration of the effects of planned outages. The planned outages of the EDN can be divided, by outage models and their effects on the reliability into two major categories: by equipment and by feeder. After studying the characteristics of different categories of planned outages, this paper expands the classification of load points by outage time from 4 types to 7 types and defines corresponding reliability parameters for the different types. By using the section algorithm, this paper proposes a reliability evaluation technique of EDN considering equipment random failures and two categories of planned outages. The proposed technique has been applied to the RBTS-BUS6 test system and some practical EDNs in China. The study results demonstrate that the proposed technique is of higher practical value and can be used for evaluating the reliability performance of EDN more efficiently considering the planned outages.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.1183-1186
• /
• 2014

Our research is different form traditional to have some large LED screen grouping together to constitute multi-vision technique. In this paper, we purpose a method of using k-path diffusion method to build connect between the devices and find an optimal data transmission path. In second half of this paper, through practical application, we using this technique transmitting data successfully and achieving a simple Multi-vision effect. This technique possess smart devices and Wifi P2P's features, these features improve system's dynamic and decentralized processing ability make our technique has high scalability.

• 대한원격탐사학회지
• /
• 제25권3호
• /
• pp.255-261
• /
• 2009

A new polarimetric SAR image classification technique based on the degree of polarization (DoP) and the co-polarized phase-difference (CPD) is presented in this paper. Since the DoP and the CPD of a scattered wave provide information on the randomness of the scattering and the type of scattering mechanisms, at first, the statistics of the DoP and CPD are examined with measured polarimetric SAR image data. Then, a DoP-CPD diagram with appropriate boundaries between six different classes is developed based on the SAR image. The classification technique is verified using the JPL AirSAR and ALOS PALSAR polarimetric data. The technique may have capability to classify an SAR image into six major classes; a bare surface, a village, a crown-layer short vegetation canopy, a trunk-layer short vegetation canopy, a crown-layer forest, and a trunk-dominated forest.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.425-430
• /
• 1995

핵자기 공명 뇌기능 영상에서 상관관계를 이용한 데이터 해석기법이 많이 사용되고 있다. 이 논문에서 새롭게 제안된 CLT 기법은 상관관계(CCT)를 이용한 기법을 변화시켜서, 이 CCT기법의 단점을 보완하고자 하였다. CLT기법은 다음의 두 단계로 이루어진다. 첫째, 잡음을 포함한 CCT기법의 상관계수결과로 부터 잡음은 제거하고 실제 자극반응 픽셀들은 추출한다. 둘째, 이산적인 분포를 가지는 반응 픽셀들을 두 가지의 선별법으로 군집을 이루도록 한다. 이 CLT기법을 이용해서 실제 자극에 반응하는 픽셀들은 서로 모이게 하였고, 잡음에 기인한 오류의 픽셀들은 제거 되어질 수 있었다. 본 논문에서 제안된 CLT기법은 기존의 다른 기법에 비해 여러 잇점이 있고, 특히 잡음에 강한 특성이 있다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.688-698
• /
• 2018

Quasi Z-Source Multilevel Inverter (QZMLI) topology has attracted grid connected Photovoltaic (PV) systems in recent days. So there is a remarkable research thrust in switching techniques and control strategies of QZMLI. This paper presents the mathematical analysis of Phase shift- Pulse Width Amplitude Modulation (PS-PWAM) for QZMLI and emphasizes on the advantages of the technique. The proposed technique uses the maximum and minimum envelopes of the reference waves for generation of pulses and proportion of it to generate shoot-through pulses. Hence, it results in maximum utilization of input voltage, lesser switching loss, reduced Total Harmonic Distortion (THD) of the output voltage, reduced inductor current ripple and capacitor voltage ripple. Due to these qualities, the QZMLI with PS-PWAM emerges to be the best suitable for PV based grid connected applications compared to Phase shift-Pulse Width Modulation (PS-PWM). The detailed math analysis of the proposed technique has been disclosed. Simulation has been performed for the proposed technique using MATLAB/Simulink. A prototype has been built to validate the results for which the pulses were generated using FPGA /SPARTAN 3E.

• 센서학회지
• /
• 제30권2호
• /
• pp.119-124
• /
• 2021

Isolation and separation of biological nanoparticles, such as cells and extracellular vesicles, are important techniques for their characterization. Dielectrophoresis (DEP) based on microfluidic chips is an effective method to isolate and separate the nanoparticles. However, the electrodes of the DEP chips are electrolyzed by the electrical signals applied to the nanoparticles. Thus, the isolation/separation efficiency of the nanoparticles is reduced considerably. Through this study, we developed a microfluidic DEP chip for reliable isolation/ separation of nanoparticles and developed a passivation technique for the protection of the DEP chip electrodes. The electrode passivation process was designed using a hydrogel and the stability of the hydrogel passivation layer was verified. The fabricated DEP chip and the proposed passivation technique were used for the collection and dispersion of the fluorescent polystyrene nanoparticles. The proposed chip and the technique for isolation and separation of nanoparticles can be leveraged in various bioelectronic applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.25-28
• /
• 1989

This paper is to study a modified hysteresis band current control technique for keeping the fixed switching frequency. The control technique is applied to an brushless DC motor(BLDCM). This paper gives an analysis of the modified hysteresis band with isolated neutral case and the PI controller with current limiter in forward loop; their characteristics are studied by simulation. The proposed control technique is implemented by using a microprocessor-based system.