• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.277-280
• /
• 2005

Epoxy-mortar composites have been wildly used as finishing and repairing materials in the construction because of their excellent properties. Conventional epoxy-mortars and concretes have an inferior applicability and cost performance ratio due to the two component mixing of the epoxy resin and hardener. In this study, we examined the engineering effect of compressive strength and flexible strength according to the various epoxy-hardener in underwater and humidity environment, and evaluated the hardener types and physical effect of Epoxy mortar using cement binder in underwater and air condition. In this study, it was clarified that the engineering properties of repairing epoxy-motars were effected by the type of hardener.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.178-185
• /
• 2000

A set of tests were accomplished in order to get better insight of the basic material properties of masonry made of normal concrete brick and different type of mortar compositions. Three different types of test were performed. Masonry unit and prism were tested by compressive strength test, Masonry wallets were tested by compressive strength test. Masonry wallets were tested in diagonally under tension. A significant influence of different mortar compositions on compression strength of masonry prism was observed, The tests have shown that for diagonal compression three different mode of failure were possible : tension crack along the loaded diagonal sliding along a mortar joint and combined sliding and diagonal crack according to the adhesive strength of a mortar.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.249-256
• /
• 2016

This paper deals with the effects of silica fume content and polymer-binder ratio on the properties of ultrarapid-hardening polymer-modified mortar using silica fume and ethylene-vinyl acetate redispersible polymer powder instead of styrene-butadiene rubber latex to shorten the hardening time. The ultrarapid-hardening polymer-modified mortar was prepared with various silica fume contents and polymer-binder ratios, and tested flexural strength, compressive strength, water absorption, carbonation depth and chloride ion penetration depth. As results, the flexural, compressive and adhesion strengths of the ultrarapid-hardening polymer-modified mortar tended to increase as increasing polymer-binder ratio, and reached the maximums at 4 % of silica fume content. The water absorption, carbonation and chloride ion penetration resistance were improved according to silica fume content and polymer-binder ratio.

• 한국건축시공학회지
• /
• 제17권5호
• /
• pp.393-401
• /
• 2017

본 논문에서는 발포폴리스티렌 비드 (EPB)와 폐 발포폴리스티렌 (WEP)의 대체율에 따른 경량 모르타르의 기초 특성을 평가였다. EPB 및 WEP를 이용한 경량 모르타르의 기초 특성으로서 단위용적중량, 압축 강도, 휨강도, 흡수율, 열전도율 및 폴리스티렌 (EPB 및 WEP) 분포를 분석하였다. 그 결과 경량 모르타르는 WEP의 대체율이 증가할수록 단위용적중량, 압축 강도, 휨강도, 흡수율 및 열전도율은 증가하고, 폴리스틸렌 면적 분포는 감소하였다.

• Computers and Concrete
• /
• 제12권3호
• /
• pp.319-335
• /
• 2013

In this paper, the properties of the cement mortar modified with styrene acrylic ester copolymer were investigated. Expanded vermiculite as lightweight aggregate was used for making the polymer modified mortar test specimens. To study the effect of polymer-cement ratio and vermiculite-cement ratio on various properties, specimens were prepared by varying the polymer-cement and vermiculite-cement ratios. Tests of physical properties such as density, water absorption, thermal conductivity, three-point flexure and compressive tests were made on the specimens. Furthermore, a coupled thermal-structural finite element model of an entire corner wall was modelled in order to study the best material configuration. The wall is composed by a total of 132 bricks of $120{\times}242{\times}54$ size, joined by means of a contact-bonded model. The use of advanced numerical methods allows us to obtain the optimum material properties. Finally, comparisons of polymer-cement and vermiculite-cement ratios on physical properties are given and the most important conclusions are exposed.

• Computers and Concrete
• /
• 제16권4호
• /
• pp.531-544
• /
• 2015

The objective of this study was to examine the effect of repair mortar on the dynamic properties such as natural frequencies, mode shape and damping ratios of two story single span scale reinforced concrete building. To this end, two story single span scale reinforced concrete building having dimensions of 150 cm (width), 150 cm (length) and 135 cm (height) was constructed. Workmanship defects such as separation of material, faulty vibration application and bad gradation of the structure were properly evaluated. Dynamic properties of damaged structure were experimentally determined using Operational Modal Analysis (OMA). Detected defects in the structure were fixed by plastering with repair mortar. Dynamic properties of repaired structure were reevaluated by using the OMA method. Finite element software called Abaqus was used to numerically determine dynamic properties of the structure. Structure modeled as solid was subjected to Linear Perturbation Frequency Method. The changes in dynamic properties of structure after the repair process were comparatively studied by evaluating experimental and numerical results.

• 공업화학
• /
• 제21권4호
• /
• pp.457-462
• /
• 2010

비이온계 및 음이온계 콘크리트 유동화제가 시멘트 입자의 젖음성 및 콘크리트 경화물성에 미치는 영향을 조사하였다. 시멘트 입자의 젖음성은 혼화제의 유동화제에 따라서 큰 차이를 보였으며, 용액의 표면에너지가 낮을수록 그리고 시멘트에 대한 젖음성이 좋을수록 콘크리트 몰타르의 유동성 및 압축강도가 높았다. 콘크리트 몰타르 유동성 및 강도는 표면개질 성능이 우수한 비이온계인 카르복실레이트 계의 경우가 시멘트 표면 접촉각이 $13^{\circ}$ 정도로 낮아서 그 성능이 가장 우수하였으며 이온계인 리그닌계, 멜라민계, 나프탈렌계는 시멘트에 대한 표면젖음성이 작아 상대적으로 그 성능이 낮았다. 카르복실 계에 리그닌계를 혼합한 경우에 단독 사용하는 경우보다 젖음성이 더 높고 몰타르의 유동성이 더 좋으며 콘크리트 압축강도가 향상되었다.

• Advances in concrete construction
• /
• 제6권6호
• /
• pp.659-677
• /
• 2018

The use of some superplasticizers in the production of mortar or concrete influences the hydration kinetic and the amount of total heat. This results in a modification of some properties, namely mortar workability, mechanical strength and durability. Three superplasticizers were used; a polynaphthalenesulfonate (PNS), a melamine resin (PMS) and a polycarboxylate (PC). They have been incorporated into various amount in a standardized mortar based on limestone cement. The aim of this study was to evaluate the rheological, mechanical and Calorimeters properties of this mortar. This will select the most compatible product and more able to be used depending on the climate of the country and the cement used. The PNS is incompatible with this type of cement registering a decrease of strength but the PMS and the PC modify the kinetics of hydration with significant heat generation and improved mechanical strength. The measured heat flow is significantly influenced by the type and dosage of superplasticizer especially for low dosage. Hydration heat and compressive strength of the different mixtures can be evaluated by determining their ultimate values and ages to reach these values where the correlation coefficients are very satisfactory.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.73-86
• /
• 2012

In this research, the possible applicability of mixture blended with natural, crushed, and recycled fine aggregate are discussed. The fresh and hardened properties of mortar using blended fine aggregates are monitored depending on various blending ratio of fine aggregates. Newly developed ternary diagram was also utilized for better interpretation of the data. It was found that air content increased and unit weight decreased as recycled fine aggregate content increased. With moisture type processing of recycled fine aggregate, the mortar flow was not negatively affected by increase in the recycled fine aggregate content. The ternary diagram is found to be an effective graphical presentation tool that can be used for the quality evaluation of mortar using blended fine aggregate.

• 콘크리트학회논문집
• /
• 제28권6호
• /
• pp.665-672
• /
• 2016

본 연구는 상전이물질이 시멘트 모르타르의 수화특성 및 강도특성에 미치는 영향을 평가하기 위하여 실시되었다. 이를 위하여 바륨 및 스트론튬계 상전이물질을 사용하였으며, 상전이물질 혼입률 1~5%에 대한 실험을 수행하였으며, 시멘트 모르타르 작업성 평가, 간이단열온도상승 실험, 압축 및 휨 강도 평가를 실시하였다. 실험결과 상전이물질의 혼입은 시멘트 모르타르의 수화열 감소에 효과적인 것으로 나타났으며, 바륨 기반 PCM을 사용할 경우 흐름성능이 다소 감소하는 것으로 나타났다. 압축 휨 강도의 경우 상전이물질의 혼입률이 증가함에 따라 감소하는 경향을 나타내었으며, PCM을 사용할 경우 혼입률에 따라 압축강도 발현추이의 변화가 발생하였다. 따라서 본 연구에서는 상전이물질이 혼입률에 따른 압축강도 추정식을 제시하였다.