• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.165-166
• /
• 2006

Surface pattern of tribological applications is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machines. This study investigated the effect of friction property fur angles of micro-scale crosshatch grooved surface pattern on bearing steel flat mated with pin-on-disk. We obtain sample which can be fabricated by photolithography process. We discuss friction property depend on an angle of cross-hatch grooved pattern. We can verify the lubrication mechanism as a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch on surface, even when surface pattern was the same density.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.79-84
• /
• 2007

Some surface pattern of tribological application is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machine. This study investigated the effect of friction property for angles of micro-crosshatch groove surface pattern on bearing steel using pin-on-disk test. We obtain sample which can be fabricated by photolithography process. We discuss the friction property depend on an angle of crosshatch groove surface pattern. We can verify the lubrication mechanism as Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch groove pattern on contact surface.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.337-345
• /
• 2018

Background: Human mesenchymal stem cells (hMSCs) are, due to their pluripotency, useful sources of cells for stem cell therapy and tissue regeneration. The phenotypes of hMSCs are strongly influenced by their microenvironment, in particular the extracellular matrix (ECM), the composition and structure of which are important in regulating stem cell fate. In reciprocal manner, the properties of ECM are remodeled by the hMSCs, but the mechanism involved in ECM remodeling by hMSCs under topographical stimulus is unclear. In this study, we therefore examined the effect of nanotopography on the expression of ECM proteins by hMSCs by analyzing the quantity and structure of the ECM on a nanogrooved surface. Methods: To develop the nanoengineered, hMSC-derived ECM, we fabricated the nanogrooves on a coverglass using a UV-curable polyurethane acrylate (PUA). Then, hMSCs were cultivated on the nanogrooves, and the cells at the full confluency were decellularized. To analyze the effect of nanotopography on the hMSCs, the hMSCs were re-seeded on the nanoengineered, hMSC-derived ECM. Results: hMSCs cultured within the nano-engineered hMSC-derived ECM sheet showed a different pattern of expression of ECM proteins from those cultured on ECM-free, nanogrooved surface. Moreover, hMSCs on the nano-engineered ECM sheet had a shorter vinculin length and were less well-aligned than those on the other surface. In addition, the expression pattern of ECM-related genes by hMSCs on the nanoengineered ECM sheet was altered. Interestingly, the expression of genes for osteogenesis-related ECM proteins was downregulated, while that of genes for chondrogenesis-related ECM proteins was upregulated, on the nanoengineered ECM sheet. Conclusions: The nanoengineered ECM influenced the phenotypic features of hMSCs, and that hMSCs can remodel their ECM microenvironment in the presence of a nanostructured ECM to guide differentiation into a specific lineage.

• KSTLE International Journal
• /
• v.6 no.2
• /
• pp.51-57
• /
• 2005

Surface texturing of tribological applications is an attractive technology of engineered surface. Therefore, reduction of friction is considered to be necessary for improved efficiency of machines. The current study investigated the potential of textured micro-scale grooves on bearing steel flat mated with pin-on-disk. We discuss reducing friction due to the influence of sliding direction at surface pattern. We can indicate lubrication mechanism as a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for the lubrication condition. It was found that the friction coefficient was changed by the surface pattern and sliding direction, even when surface pattern was the same. It was thus verified that micro-scale grooves could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions. The lubrication regime influences the friction coefficient induced by the sliding direction of groove pattern. The friction coefficient depends on a combination of resistance force and hydrodynamic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.255-255
• /
• 2010

Recently, nonvolatile memories (NVM) of various types have been researched to improve the electrical performance such as program/erase voltages, speed and retention times. Also, the charge trap memory is a strong candidate to realize the ultra dense 20-nm scale NVM. Furthermore, the high charge efficiency and the thermal stability of SiC nanocrystals NVM with single $SiO_2$ tunnel barrier have been reported. [1-2] In this study, the SiC charge trap NVM was fabricated and electrical properties were characterized. The 100-nm thick Poly-Si layer was deposited to confined source/drain region by using low-pressure chemical vapor deposition (LP-CVD). After etching and lithography process for fabricate the gate region, the $Si_3N_4/SiO_2/Si_3N_4$ (NON) and $SiO_2/Si_3N_4/SiO_2$ (ONO) barrier engineered tunnel layer were deposited by using LP-CVD. The equivalent oxide thickness of NON and ONO tunnel layer are 5.2 nm and 5.6 nm, respectively. By using ultra-high vacuum magnetron sputtering with base pressure 3x10-10 Torr, the 2-nm SiC and 20-nm $SiO_2$ were successively deposited on ONO and NON tunnel layers. Finally, after deposited 200-nm thick Al layer, the source, drain and gate areas were defined by using reactive-ion etching and photolithography. The lengths of squire gate are $2\;{\mu}m$, $5\;{\mu}m$ and $10\;{\mu}m$. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer, E4980A LCR capacitor meter and an Agilent 81104A pulse pattern generator system. The electrical characteristics such as the memory effect, program/erase speeds, operation voltages, and retention time of SiC charge trap memory device with barrier engineered tunnel layer will be discussed.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.252-258
• /
• 2015

This is the first study reporting the evaluation of transgenic lines of tomato harboring rice chitinase (RCG3) gene for resistance to two important fungal pathogens Fusarium oxysporum f. sp. lycopersici (Fol) causing fusarium wilt and Alternaria solani causing early blight (EB). In this study, three transgenic lines TL1, TL2 and TL3 of tomato Solanum lycopersicum Mill. cv. Riogrande genetically engineered with rice chitinase (RCG 3) gene and their R1 progeny was tested for resistance to Fol by root dip method and A. solani by detached leaf assay. All the R0 transgenic lines were highly resistant to these fungal pathogens compared to nontransgenic control plants. The pattern of segregation of three independent transformant for Fol and A. solani was also studied. Mendelian segregation was observed in transgenic lines 2 and 3 while it was not observed in transgenic line 1. It was concluded that introduction of chitinase gene in susceptible cultivar of tomato not only enhanced the resistance but was stably inherited in transgenic lines 2 and 3.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.857-863
• /
• 2008

The purpose of this study is to analyze the types of Hibiscus patterns expressed on Aloha shirts. This study analyzed real data collected from man's aloha shirts displayed at the International Market Place in Waikiki of Hawaii during January 21-27, 2007. 35 pieces of Aloha shirts with Hibiscus Patterns were was analyzed. The total of each analysis means all number of patterns sampled or appeared to analyze the types of patterns. The motif of Hibiscus was sampled a total of 42 units for some shirts having several motifs. Its motif was divided into two groups, 20 units(47.62%) of natural type and 22 units(52.38%) of stylized type, according to modeling. Two types were much the same percentage. Hibiscus patterns were classified into three groups, isolated, band and arabesque type, by formation type. The isolated type was appeared most frequently. The layout of Hibiscus pattern was classified into three groups, engineered print, all over print and border print. All over print was appeared most frequently. The data of this study will be provided as a resource to promote using and developing of the pattern of Korean rose of Sharon.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.4
• /
• pp.249-256
• /
• 2003

The lack of sufficient oral mucosa available for intra-oral reconstruction has been dealt with by the use of skin or oral mucosa grafts harvested from donor sites but grafts requires more than one surgical procedures and could cause donor site morbidity. Many investigators have attempted to increase available soft tissue by tissue engineered skin or oral mucosa replacements for clinical applications. But, reconstructed mucosa by several methods have low physical properties such as rolling and contraction. The aims of this study were to develope an in vitro experimental model that maintains an epithelial-mesenchymal interaction by organotypic raft culture, and to characterize biologic properties of three-dimensionally cultured oral mucosa embedded with Polydioxanone mesh by histological and immunohistochemical analysis. The results were as follows; 1. Oral mucosa reconstructed by three-dimensional organotypic culture revealed similar morphologic characteristics to equvalent normal oral mucosa in the point that they show stratification and differentiation. 2. The expression of cytokeratin 10/13 and involucrin in the cultured tissue showed the same pattern with normal oral mucosa suggesting that organotypic co-culture condition is able to induce cellular differentiation. 3. After insertion of polydioxanone mesh, increased tensile strength were observed. These results suggest that three-dimensional organotypic co-culture of the oral mucosa cell lines with the dermal equvalent consisting type I collagen and fibroblasts reproduce the morphologic and immunohistochemical characteristics similar to those in vivo condition. And increased physical properties by use of polydioxanone mesh will helpful for clinical applications.

• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.541-549
• /
• 2015

This study was conducted to experimentally investigate the seismic retrofitting performance of non-ductile reinforced concrete (RC) frames by introducing engineered cementitious composite (ECC) wing panel elements. Non-ductile RC frame tested in this study were designed and detailed for gravity loads with insufficient or no consideration to lateral loads. Therefore, Non-ductile RC frame were not satisfied on present seismic code requirements. The precast ECC wing panels were used to improve the seismic structural performance of existing non-ductile RC frame. A series of experiments were carried out to evaluate the structural performance of ECC wing panel elements alone a non-ductile RC frame strengthened by adding ECC panel elements. Failure pattern, strength, stiffness and energy dissipation characteristics of specimens were evaluated based on the test results. The test results show that both lateral strength and stiffness were significantly improved in specimen strengthened than non-ductile RC frame. It is noted that ECC wing wall elements application on non-ductile RC frame can be effective alternative on seismic retrofit of non-ductile building.