• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.130-137
• /
• 2012

In this paper, we propose core and edge router architectures with LPI(Low Power Idle) for reducing energy consumption in OBS networks. The proposed core router architecture is comprised of a BCP switch, a burst switch, line cards and sleep/wake controller for LPI. When the offered load of network is low, sleep/wake controller can change the state of the core router line card from active to sleep state for saving the energy after receiving network control packet. The edge router consists of a switch for access line card, a SCU and OBS edge router line cards. The LPI function in edge router line card is performed through network level control by network control packet, individually. Additionally, PHY/transceiver modules can transition active state to sleep state when burst assemble engine generates new bursts. To evaluate the energy saving performance of proposed architecture with LPI, the power consumption of each router is analyzed by using data sheet of commercial router and optical device. And, simulation is also performed in terms of sleep time of PHY/Transceiver through OPNET.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.136-141
• /
• 2018

Carbon dioxide ($CO_2$) exists not only as a component of natural gas, biogas, and landfill gas, but also as a major combustion product of fossil fuels which leads to a major contributor to greenhouse gases. Hence it is essential to reduce or eliminate carbon dioxide ($CO_2$) in order to obtain high fuel efficiency of internal combustion engine, to prevent corrosion of gas transportation system, and to cope with climate change preemptively. In recent years, there has been a growing interest in not only conventional membrane-based separation but also new adsorbent-based separation technology. Particularly, in the case of metal-organic frameworks (MOFs), it has been received tremendous attentions due to its unique properties (eg : flexibility, gate effect or strong binding site such as open metal sites) which are different from those of typical porous adsorbents. Therefore, in this study, stereotype of two MOFs have been selected as its flexible MOFs (MIL-53) representative and numerous open metal sites MOFs (MOF-74) representative, and compared each other for $CO_2/CH_4$ separation performance. Furthermore, varying and changeable separation performance conditions depending on the temperature, pressure or samples' unique properties are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.669-678
• /
• 2018

This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.699-708
• /
• 2017

The service industry, as a new growth engine, has become more important in response to changes in the global economy and the industrial environment. Developed countries have promoted the competitiveness of the service industry and have enhanced economic added value. Developing new services requires extensive resources. Therefore, cooperation and network building capabilities with customers, suppliers, and various knowledge creation agencies are critical sources of competitiveness. This study classified the Korean service industry by industrial type in order to enhance innovation competence.The Korean service industry lags behind that of developed countries, and this study analyzed the differences of innovation results according to collaboration partners by the classified industry. By adopting a method that applies industrial classification by Dialogic's innovation pattern, this study showed external cooperation results were different by industrial type. Analysis results revealed that companies cooperate with customers and competitors in many cases; however, product innovation was higher for companies that collaborated with private service companies. In the 'Innovation in services' industry, industry cooperation with universities showed organizational innovation achievements. In the 'Innovation through services' industry, cooperation with customers positively affected marketing innovation achievements. Consequently, the need to foster consulting firms and universities that can professionally collaborate with companies is implied in order to enhance the Korean service industry.

• Journal of KIISE:Software and Applications
• /
• v.37 no.4
• /
• pp.317-322
• /
• 2010

This paper proposes how to improve performance of the Korean document sentiment-classification system using semantic properties of the sentiment words. A sentiment word means a word with sentiment, and sentiment features are defined by a set of the sentiment words which are important lexical resource for the sentiment classification. Sentiment feature represents different sentiment intensity in general field and in specific domain. In general field, we can estimate the sentiment intensity using a snippet from a search engine, while in specific domain, training data can be used for this estimation. When the sentiment intensity of the sentiment features are estimated, it is called semantic orientation and is used to estimate the sentiment intensity of the sentences in the text documents. After estimating sentiment intensity of the sentences, we apply that to the weights of sentiment features. In this paper, we evaluate our system in three different cases such as general, domain-specific, and general/domain-specific semantic orientation using support vector machine. Our experimental results show the improved performance in all cases, and, especially in general/domain-specific semantic orientation, our proposed method performs 3.1% better than a baseline system indexed by only content words.

• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.87-94
• /
• 1991

An approximate analytical method to predict performance characteristics of the stirling engines in a preliminary design stage was investigated. In basic equations proposed by walker, typical temperatures of working fluids in expansion and compression spaces were treated the same as those of working fluids in heater and cooler respectively. While the temperature of working fluids in the expansion space was actually lower than that of working fluids in the heater, the temperature of working fluids in the compression space was higher than that of working fluids in the cooler. The aim of this study divided typical temperatures of working fluids in expansion and compression spaces into serval grades, and than evaluated the experimental engine. As the result, the case which working fluids temperature of expansion space was treated as lower than the heater temperature and which that of compression space was treated as higher than the cooler temperature, was much closer to the experimental value.

• The Journal of Information Technology
• /
• v.4 no.3
• /
• pp.87-100
• /
• 2001

IETF has proposed integrated services model(Int-Serv) and differentiated service(Diff-Serv) to supply IP QoS in Internet[1][2]. Int-Serv model uses state information of each IP flow, so satisfies QoS according to traffic characteristics, but increases the amount of flow state information with increasing flow number. Diff-Serv uses PHP(Per Hop Behaviour) and there are well-defined classes to provide differentiated traffics with different services according to delay and loss sensitivity. Diff-Serv model can provide diverse services in Internet because of having no the state and signal information of each flow. As MPLS uses the packet forwarding technology based on label, it implements the forwarding engine of high performance easily. The MPLS can set up the path having different and variable bandwidth and assign each path to particular CoS (Class of Service). Therefore it is possible to support the Diff-Serv model of well- defined classes that can provide the differentiated traffic with different services according to delay and loss sensitivity in IP QoS models of IETF. In this paper we propose a scheme that can accommodate Diff-Serv model to provide QoS. The system performance has been estimated by scheduling plan according to traffic classes.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.19-29
• /
• 2011

As people have heightened attention to blogs that are individual media, a variety rank algorithms was proposed for the blog search. These algorithms was modified for structural features of blogs that differ from typical web sites, and measured blogs' reputations or popularities based on the interaction results like links, comments or trackbacks and reflected in the search system. But actual blog search systems use not only blog-ranks but also search words, a time factor and so on. Nevertheless, those might not produce desirable results. In this paper, we suggest a topic-rank technique, which can find blogs that have significant degrees of association with topics. This technique is a method which ranks the relations between blogs and indexed words of blog posts as well as the topics representing blog posts. The blog rankings of correlations with search words are can be effectively computed in the blog retrieval by the proposed technique. After comparing precisions and coverage ratios of our blog retrieval system which applis our proposed topic-rank technique, we know that the performance of the blog retrieval system using topic-rank technique is more effective than others.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.5
• /
• pp.281-294
• /
• 2011

Physics-based sound synthesis usually requires high computational costs and this results in a restriction of its use in real-time applications. This motivates us to implement the sound synthesis algorithm of plucked-string instruments using multi-core processor architectures and determine the optimal processing element (PE) configuration for the target instruments. To determine the optimal PE configuration, we evaluate the impacts of a sample-per-processing element (SPE) ratio that is defined as the amount of sample data directly mapped to each PE on system performance and both area and energy efficiencies using architectural and workload simulations. For the acoustic guitar, the highest area and energy efficiencies are achieved at a SPE ratio of 5,513 and 2,756, respectively, for the synthesis of musical sounds sampled at 44.1 kHz. In the case of the classical guitar, the maximum area and energy efficiencies are achieved at a SPE ratio of 22,050 and 5,513, respectively. In addition, the synthetic sounds were very similar to original sounds in their spectra. Furthermore, we conducted MUSHRA subjective listening test with ten subjects including nine graduate students and one professor from the University of Ulsan, and the evaluation of the synthetic sounds was excellent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.518-527
• /
• 2020

The establishment of a green remodeling strategy is focused on technology, so the necessity of establishing a customized strategy considering the field situation has emerged. This paper examined the technology strategy through sensitivity analysis as a methodology for guiding strategy. For a 90-square-meter detached house, nine models of the construction standards of pre-1980s, 1984, and 2010 in Seoul, Daejeon, and Busan were assessed using the optimization method that combines the energy plus engine and the ModeFrontier. Sensitivity analysis was performed, and the remodeling strategy priority was derived. For pre-1980 models, the strategy for enhancing the roof insulation performance had a significant priority. The SHGC values of the windows were found to have the next highest priority regardless of the region and the time of completion, showing that the performance standard, including the SHGC, needs to be expanded. The possibility of remodeling while maintaining the existing geometry was confirmed because the adjustment of the window wall ratio accompanying large-scale demolition works has low priority. The priorities of technology strategies in each case showed very different patterns, suggesting the possibility of establishing a remodeling strategy by a comprehensive evaluation along with economics and constructability analysis.