• 제목/요약/키워드: engine damage

검색결과 270건 처리시간 0.025초

HCNG 엔진에서 압축비 변경에 따른 성능 및 노킹 특성 연구 (Study of Performance and Knock Characteristics with Compression Ratio Change in HCNG Engine)

  • 임기훈;이성원;박철웅;최영;김창기
    • 대한기계학회논문집B
    • /
    • 제37권4호
    • /
    • pp.387-394
    • /
    • 2013
  • 온실가스인 $CO_2$ 배출을 줄이기 위한 연료로서 고효율 연소의 특성을 갖는 수소-천연가스 혼합연료(HCNG)가 유력한 미래 대체연료로서 주목받고 있다. 일반적으로 엔진에서의 압축비 상승은 효율 향상 및 이산화탄소 배출 저감을 위한 방법 중의 하나로서 HCNG 엔진에서도 고압축비의 적용이 효과적일 수 있으나, 수소의 높은 연소 속도 및 화염 온도로 인한 조기착화, 노킹 등의 이상연소는 엔진 부품의 파손 및 출력 저하를 초래할 수 있다. 본 연구는 HCNG 엔진에서 압축비를 변경하여 엔진 성능 및 노킹 특성을 분석하는데 목적이 있다. 기존의 CNG 엔진에 CNG 및 HCNG 연료를 적용하여 공기과잉률의 변화에 따른 연소 특성을 분석하고, 압축비 변경 후 엔진의 성능에 미치는 영향을 파악하였다.

블레이드 파편 봉쇄를 위한 컨테인먼트 케이스 연구 동향 (Research Survey of the Containment Case for Damage Protection from Blade Fragments)

  • 채승호;안상현;이수용;노진호
    • 항공우주시스템공학회지
    • /
    • 제14권3호
    • /
    • pp.60-68
    • /
    • 2020
  • 항공기 엔진 내의 파손된 블레이드가 케이스를 관통하여 외부로 나가게 되면, 동체에 부딪혀 승객의 안전을 위협하게 된다. 따라서 엔진 케이스 설계 시 항공청의 안전성 평가 인증을 받아야한다. 본 논문에서는 국내의 독자적인 엔진 개발을 위해 필요한 엔진 케이스의 컨테인먼트 인증 요구조건과 개발 기술에 대하여 조사하였다. 미국과 유럽의 항공청에서 제시하는 컨테인먼트 안전성 요구 조건을 정리하고 이 인증에 부합하는 케이스의 파편 봉쇄를 검증하는 실험적/해석적 방법에 대하여 확인하였다. 컨테인먼트 케이스에 대한 최근의 연구를 분석하여 케이스 개발 시 검증 방법을 제시하고자 한다.

가스 발생기 분사기 LOx post 손상 방지를 위한 분사기 개발 (Development of Gas Generator for Liquid Rocket Engine to prevent of damage for LOx post)

  • 송주영;김종규;문일윤;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.353-357
    • /
    • 2005
  • 본 연구는 30톤급 엔진 개발에 필요한 실물형 가스 발생기를 개발하는 과정에서 분사기 LOx post에 발생한 손상에 대해 기술하였고 손상에 대한 원인 분석에 대해 논의하였다. 4분사기, 실물형 가스발생기 및 1차 재설계된 분사기에 대한 연소시험 결과를 기술하였고 이에 대한 원인으로 연소 불안정, 종단시 purge, LOx 분무의 낮은 모멘텀, 작은 recess number, 적은 LOx 분사기 유량, 큰 분무 각도 등이 주원인임을 알 수 있었다. 이 분석 결과에 따라 recess number를 증가, 분사기 LOx 및 연료 분무각 증가, LOx post 외벽과 연료막 사이 간격 축소, LOx post 벽 두께 증가의 방향으로 분사기에 대한 재설계가 이루어졌다.

  • PDF

총 디젤분진의 DNA 손상작용과 야채 및 과일추출물의 보호효과 (Chemopreventive Effect of Vegetable or Fruit Extract Against Total Diesel Exhaust Particle Extract in NIH/3T3 Cells Using Alkaline Single Cell Gel Electrophoresis)

  • 허찬;김남이;허문영
    • Environmental Analysis Health and Toxicology
    • /
    • 제21권2호
    • /
    • pp.127-138
    • /
    • 2006
  • In urban areas, diesel exhaust particles (DEP) are probably a major component of particulate matters, especially in Korea where drive many diesel vehicles. The aim of this study was to investigate genotoxic effects of DEP using single ceil gel electrophoresis. In order to evaluate the mechanisms of DEP genotoxicity, the rat microsome mediated and DNA repair enzyme treated comet assays together with conventional comet assay were performed. Total diesel particles (DEPT) was collected without site fractionation from diesel engine bus and dichloromethane extract was obtained. The organic extract of DEPT revealed DNA damage itself in NIH/3T3 cells. The level of DNA breaks plus oxidative DNA lesions and microsome mediated DNA damage was assessed by modified single cell gel eletrophoresis. DEPT was able to induce oxidative DNA damage as well as microsome mediated DNA damage. Vitamin C as an model antioxidant reduced DNA damage in endonuclase III treated comet assay. One of flavonoid, galangin as a CYP1A1 inhibitor. reduced DNA damage in the presence of S-9 mixture. $DEP_T$ is the sources of oxidative stress, but antioxidants can significantly reduce oxidative DNA dmage. And $DEP_T$ may contain indirect mutagens which can be inhibited by CYP1A1 inhibitors. The ethanol extracts of the mixed vegetables (BV) or the mixed fruits (BF) were evaluated for their in vitro antigenotoxic effects. BV and BF showed potent Inhibitory effects against DEPT induced DNA damage with oxidative DNA lesions and in the prescence of S-9 mixture. These results indicate that BV and BF could prevent cellular DNA damage by inhibiting oxidative stress and suppressing cytochrome P4501A1 in cell culture.

JRTR 연구용원자로에 대한 최종 확률론적 안전성평가 (A Study on the Final Probabilistic Safety Assessment for the Jordan Research and Training Reactor)

  • 이윤환
    • 한국안전학회지
    • /
    • 제35권3호
    • /
    • pp.86-95
    • /
    • 2020
  • This paper describes the work and the results of the final Probabilistic Safety Assessment (PSA) for the Jordan Research and Training Reactor (JRTR). This final PSA was undertaken to assess the level of safety for the design of a research reactor and to evaluate whether it is probabilistically safe to operate and reliable to use. The scope of the PSA described here is a Level 1 PSA, which addresses the risks associated with core damage. After reviewing the documents and its conceptual design, nine typical initiating events were selected regarding internal events during the normal operation of the reactor. AIMS-PSA (Version 1.2c) was used for the accident quantification, and FTREX was used as the quantification engine. 1.0E-15/yr of the cutoff value was used to deliminate the non-effective Minimal Cut Sets (MCSs) when quantifying the JRTR PSA model. As a result, the final result indicates a point estimate of 2.02E-07/yr for the overall Core Damage Frequency (CDF) attributable to internal initiating events in the core damage state for the JRTR. A Loss of Primary Cooling System Flow (LOPCS) is the dominant contributor to the total CDF by a single initiating event (9.96E-08/yr), and provides 49.4% of the CDF. General Transients (GTRNs) are the second largest contributor, and provide 32.9% (6.65E-08/yr) of the CDF.

연료 과농 가스발생기의 분사기 손상에 관한 연구 (Study of Injector Damage on Fuel-rich Gas Generator)

  • 문일윤;이광진;임병직;서성현;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제26회 춘계학술대회논문집
    • /
    • pp.197-201
    • /
    • 2006
  • 액체산소와 케로신을 사용하여 연료 과농 조건에서 작동하는 30 ton급 로켓엔진용 가스발생기를 개발하는 과정에서 사용된 동축 와류형 분사기의 산화제 post에 발생한 열손상에 대한 연구가 진행되었다. 분사기의 열손상을 방지하기 위해 분사기는 내부 혼합 방식을 유지하면서 recess를 증가시키고 재순환영역을 최소화하여 재순환영역에서의 화염형성을 억제하는 방향으로 재설계 되었다. 축소형 규모의 연소시험에서 이러한 재설계를 통해 연료 과농 가스발생기용 동축 와류형 분사기의 산화제 post 열손상을 방지할 수 있음을 확인할 수 있었다.

  • PDF

저널베어링의 윤활상태 판별 기법에 관한 연구 (A Study on the Identification Method of Lubrication Characteristics for Journal Bearing)

  • 김명환;이상돈;조용주
    • Tribology and Lubricants
    • /
    • 제25권1호
    • /
    • pp.56-60
    • /
    • 2009
  • A journal bearing is used in a hydrodynamic lubrication state, but it becomes a boundary lubrication state that asperity of a contact part touch each other when pressure is too high and an enough oil film is not formed by viscosity change due to lubricating oil temperature. At this time, abrasion due to contact between a journal and a bearing is unavoidable, and scuffing damage that the journal adheres to the bearing occurs if the process is repeated. Damage of the journal bearing is an important problem because it gives huge damage to a machine and can generate large accidents such as economic loss and human life damage. In this study, method for using the pull-up resistor concept was introduced as the monitoring technology. This monitoring system is important to enhance reliability of the engine.

디젤 자동차용 매연저감장치(DPF)의 클리닝 성능 고도화에 관한 연구 (Study on the high efficiency cleaning performance of the diesel vehicle DPF)

  • 김형준;정재우;강정호;이진우;박정수
    • 한국산학기술학회논문지
    • /
    • 제17권3호
    • /
    • pp.163-170
    • /
    • 2016
  • 디젤 자동차의 배기가스 규제는 매년 지속적으로 강화되고 있다. 최근 HC, CO, NOx, PM에 대한 배기 규제는 매우 엄격한 기준을 적용하고 있다. 향후에는, 입자상 물질의 수량규제로 더욱 강화될 것으로 예상되고 있다. 이에 따라, 현재 대부분의 디젤 차량은 PM 저감을 위해 배기후처리징치(DPF)를 적용해 왔다. 엔진의 주행거리가 증가함에 따라, 엔진 배기가스에 포함된 재와 soot이 DPF내부에 축적된다. 축적된 재와 soot은 DPF 손상이나 엔진 성능 악화의 원인이 된다. 그러므로 효율적인 DPF의 클리닝은 엔진관리 측면에서 매우 중요한 부분이다. 만약 엔진이 주기적 클리닝을 통해 관리가 잘 된다면 엔진의 출력과 연비를 개선하고, 유지관리 비용을 절감할 수 있다. 따라서, 본 연구에서는 DPF 내부에 누적된 재와 soot을 효과적으로 클리닝 할 수 있는 고효율 DPF 클리닝 방법 및 장치의 개발을 수행하였고, 그 결과를 제시하였다.

LPG 자동차 엔진의 솔레노이드밸브, 릴레이, 공회전조절장치의 고장사례 연구 (Study for Failure Examples of Solenoid Valve, Relay and Idle Speed Control Actuator in Liquid Petroleum Gas vehicle Engines)

  • 김청균;이일권;조승현
    • 한국가스학회지
    • /
    • 제15권3호
    • /
    • pp.47-52
    • /
    • 2011
  • 이 논문의 목적은 LPG 자동차의 전자제어에 대한 요소의 하나인 액추에이터에 대한 고장사례를 찾아 분석하고 연구하는 것이다. 차량의 연료를 저장하는 봄 내부의 LPG 긴급 차단 솔레노이드 밸브의 필터가 막혀 연료의 공급이 간헐적으로 차단되는 현상이 발생되어 엔진이 작동하는 동안 엔진의 초기시동불량이나 가속이 되지 않는 것을 확인하였다. 엔진 컨트럴 릴레이 부위의 접점부가 가공불량이나 조립불량에 의해 완전한 면접촉이 되지않아 접촉저항이 발생되어 초기 시동을 걸었을 때 시동이 걸렸으나 재시동을 걸 때 시동이 걸리지 않는 현상을 확인하였다. 공회전 조절장치의 내부에 카본이 퇴적되어 액추에이터가 고착되어 흡입공기의 공급이 감소되어 자동차의 시동이 걸려 공회전 상태일 때 엔진의 회전수가 규정 범위를 벗어나 상승과 하락을 반복하는 불안정 상태를 확인하였다.

1.5톤급 액체-액체 핀틀 분사기 연소시험에서의 핀틀 팁 열손상 원인 분석 (Analysis of Pintle Tip Thermal Damage in the Combustion Hot Firing Test with a 1.5-tonf Class Liquid-Liquid Pintle Injector)

  • 강동혁;황도근;유철성;고영성
    • 한국추진공학회지
    • /
    • 제24권6호
    • /
    • pp.1-9
    • /
    • 2020
  • 케로신/액체산소를 추진제로 하는 직사각형 2열 오리피스를 갖는 1.5톤급 액체-액체 핀틀 분사기를 설계 및 제작하여 액체로켓엔진의 실운용 조건인 초임계 상태에서 핀틀 분사기의 연소성능 및 연소 안정성 검증 연소시험을 수행하였다. 연소시험결과 연소실 내부의 고혼합비 재순환 영역에서 생성되는 고온의 연소가스에 핀틀 팁이 손상되었다. 핀틀 팁으로 전달되는 열유속 또는 하중에 대한 냉각 성능을 증가시키기 위해 핀틀 분사기 내부에 인서트 노즐을 설치하였다. 연소시험 결과 인서트 노즐의 설치, AR 및 BF가 핀틀 팁 냉각 성능에 큰 영향을 주는 인자로 확인되었다.