• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.356-363
• /
• 2014

Marine diesel engines operate in environments in which damage easily occurs from corrosion. Recently, damage to cylinder liners has increased from corrosion wear caused by increased engine power. This damage can cause serious problems in the economy. Thus, many researchers have treated and studied damaged cylinder liners. However, a method is necessary for real-time monitoring of damage to cylinder liners during operation of the engine, before serious damage can occur. This study carries out reciprocating friction and wear tests on a cast iron specimen under various corrosion atmospheres and verifies the variations of friction coefficient and friction surface. Additionally, the friction coefficient and friction status are predicted by using a neural network that learns the vibration and frequency spectrum data from an acceleration sensor. According to our conclusions, amplitude is distributed highly at high frequencies, and values of standard deviation and kurtosis are high when damage to the friction surface is serious. The accuracy rate of the friction coefficient predicted by the neural network is over 80% of the real measured value without NaCl, and application of the neural network is very effective for diagnosing the friction condition and damage to the cylinder liner.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.581-586
• /
• 2014

In general vibration test considers both harmonic vibration and random vibration, When developing the vehicle component. But the effect of harmonic vibration is larger in the parts around the vehicle engine, sole testing the harmonic vibration is considered. In this study, the fatigue damage of the linear system fixed around the engine is analyzed when the effect of random vibration is higher, harsher than the normal road surface condition. In condition the vehicle speed and the engine RPM are similar, the higher the harshness of the road surface condition is, the larger the fatigue damage level is. Therefore both random vibration and harmonic vibration must be considered in vibration test of components around the engine. Proposing the sine on random(SOR) vibration test that can exam considering both of vibrations, harmonic and random.

• 한국가스학회지
• /
• 제26권6호
• /
• pp.24-29
• /
• 2022

이 논문은 LPG 자동차의 캠축베어링 시일의 오일누설, 컴퓨터커넥터 핀 손상에 의한 접촉불량, 베이퍼라이저 배부불량으로 인한 고장사례에 대하여 현상을 분석, 연구한 것이다. 첫 번째 사례는 실린더 헤드를 분해하여 확인한 결과 타이밍 시스템에서 가까운 엔진의 흡기캠축의 베어링과 시일의 조립부 손상으로 인해 이 부위로 엔진오일이 누설되는 것을 확인하였다. 두 번째 사례는 엔진컴퓨터로 공급되는 자동차의 시동을 제어하는 전원선의 커넥터 핀이 손상되어, 전원이 공급되지 않아 시동이 꺼진 것을 확인하였다. 세 번째 사례는 베이퍼라이저 내부에 이물질의 퇴적으로 인해 가스의 흐름이 원활하지 못하여 엔진의 부조화현상이 발생되었다. 결국, 베이퍼라이저에서 믹서로 적은 양의 가스를 공급하게 되고, 믹서의 스로틀 열림량을 제어하는 컴퓨터는 그 열림량만큼 공기를 공급하게 됨으로써 연소실에서 혼합기는 희박한 상태가 되어 엔진의 적정출력을 내지 못하는 것을 확인하였다. 따라서, 자동차가 최적의 운전조건이 될 수 있도록 자동차관련 시스템의 관리를 철저하게 해야한다.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.525-531
• /
• 2012

This study aims at the structural analysis of vibration and fatigue according to the configuration of engine mount. Maximum equivalent stress or deformation is shown at bracket or case respectively. As harmonic vibration analysis, the maximum displacement amplitude is happened at 4,000Hz. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' or 'Saw tooth' becomes most stable. In case of 'Sample history' or 'Saw tooth' with the average stress of 4,200MPa or 0MPa and the amplitude stress of -3,000MPa or 7MPa, the possibility of maximum damage becomes 70%. This stress state can be shown with 7 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design on engine mount by investigating prevention and durability against its damage.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1394-1405
• /
• 2022

The importance of ensuring the inherent safety and security has been more emphasized in recent years to demonstrate the integrity of nuclear facilities under external human-induced events (e.g. aircraft crashes). This work suggests a simulation methodology to effectively evaluate the impact of a commercial aircraft engine onto a dry storage facility. A full-scale engine model was developed and verified by Riera force-time history analysis. A reinforced concrete (RC) structure of a dry storage facility was also developed and material behavior of concrete was incorporated using three constitutive models namely: Continuous Surface Cap, Winfrith, and Karagozian & Case for comparison. Strain-based erosion limits for concrete were suitably defined and the local responses were then compared and analyzed with empirical formulas according to variations in impact velocity. The proposed methodology reasonably predicted such local damage modes of RC structure from the engine missile, and the analysis results agreed well with the calculations of empirical formulas. This research is expected to be helpful in reviewing the dry storage facility design and in the probabilistic risk assessment considering diverse impact scenarios.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.223-229
• /
• 2009

The engine backfire leading to the damage to the intake system is observed in the mixer-type LPG engines. The hot spot flowing back into the intake manifold from the engine cylinder during the valve overlap period is known to give rise to the backfire. This backfire is known to be the main cause of the abrupt stop of the vehicle leading to the accidents on the streets. In this study, the cylinder pressure buildup at the later stage of combustion due to the prolonged burning is presumed to be the main cause of the backflow leading to the backfire. This is experimentally observed by creating the engine misfire using the ill-conditioned ignition systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2007

본 연구에서는 터보 팬 엔진 나셀 복합재 구조의 충격 손상에 관한 연구를 수행하였다. 연구 결과의 신뢰성 검증을 위해 선행 연구된 결과와 비교 분석하였다. 샌드위치 구조의 형상은 카본/에폭시 면재와 폼 코어로 형성되어있다. 샌드위치 패널의 유한 요소 해석 결과 해석 결과의 타당성을 확인하였다. 초기 손상이 발생하는 속도가 평가되었고 예측된 속도에서 충격 해석이 수행되었다. 충격 해석 결과 예측된 충격 손상에서 손상이 발생하는 것으로 확인되었다.

• 한국항공운항학회지
• /
• 제30권1호
• /
• pp.12-19
• /
• 2022

The exhaust wake of an aircraft engine is discharged in a high temperature and high speed, which can damage objects such as an aircraft in the rear. The exhaust wake can lift small foreign substances lying on the ground or falling off, and the floating foreign substances can enter the intake duct of the aircraft moving from the rear and cause engine FOD (Foreign Object Damage). This study experimentally analyzed how the engine exhaust wake generated from military jet fighters affects the movement of foreign substances and evaluated the effects of foreign substances on the damaged area by measuring wake velocity. The simulation and field experimental results confirmed that the effect of exhaust wake increases as the rear position closer, and that foreign substances lifted by the wake can act as FOD to the adjacent rear aircraft.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.9-16
• /
• 2006

Variable valve timing is one of the attractive ways to control homogeneous charge compression ignition (HCCI) engine. Hot internal residual gas which can be controlled by variable valve timing(VVT) device, makes fuel evaporated easily, and ignition timing advanced. Regular gasoline was used as main fuel and di-methyl ether(DME) was used as ignition promoter in this research. HCCI engine operating range is limited by high combustion peak pressure and engine noise. High combustion pressure can damage the engine during operation. To avoid engine damage, the rich limits have to define using various methods. Peak combustion pressure, rate of cylinder pressure rise was considered to determine rich limit of engine operating range. Knock probability was correlated with the rate of cylinder pressure rise as well as the peak combustion pressure.

• 한국화재조사학회논문지
• /
• 제11권1호
• /
• pp.83-88
• /
• 2008

차량화재의 발화지점은 크게 엔진룸과 승객실로 볼 수 있다. 엔진룸에서 발생된 차량화재의 경우 방화벽이 엔진룸과 승객실 사이에 설치되어 있으므로 승객실로 전이는 약 10~15분 정도로 지연되는 것이 일반적이다. 엔진룸은 그 차량의 구동 방식에 따라 종치형과 횡치형으로 배열되는데 이들 엔진 배열에 따라 화염이 전이되는 과정이 각각 다르게 나타나고 좌우 대시 패널에 나타난 소손정도 또한 다르게 나타난다. 따라서 엔진룸에서 발생된 차량 화재 감식시 좌우 대시패널의 소손정도를 먼저 파악하는 것이 발화지점을 빠르게 찾는 방법인 것으로 사료된다.