• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.263-263
• /
• 2007

In the future, self-contained sensors and processing units will need on-board, renewable power supplies to be truly autonomous. One way of supplying such power is through energy harvesting, processes by which ambient forms of energy are converted into electricity. One energy harvesting technique involves converting kinetic energy, in the form of vibrations, into electrical energy through the use of piezoelectric materials. Researchers are currently investigating how piezoelectric materials can be used to harvest power. This study examines the use of auxiliary structures, consisting of a mechanical fixture and a lead zirconate/lead titanate (PZT) piezoelectric element, which can be attached to any boundary conditions vibrating beam of the any boundary conditions. Adjusting various boundary conditions of these structures can maximize the strain induced in the attached PZT element and improve power output.

• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.60-71
• /
• 1996

The purposes of this study were to develop a simulation model and to determine minimum specific airflow rate requirements for natural air drying of rough rice in Korea. A simulation model was developed considering energy and mass balances within grain bed, drying and rewetting rates, and hysterisis effect between sorption and desorption isotherms. As the results of validation test, the moisture contents predicted by the model agreed very well with the actual data. The criteria for determining minimum specific airflow rate requirements was that the top loom layer in the bin be dried to a moisture content below 16 percent wet basis with less than 0.5% drymatter decomposition. The minimum specific airflow rate requirements in 13 locations of Korea were presented based on the worst one among the past 7 to 13-year weather data. These requirements were also presented for all the combinations of three harvest dates and four harvest moisture contents. Specific airflow rate requirements seemed to be half by each 2 percent reduction in moisture content from 24 percent. As harvest date was delayed by 10 days from October 1, these requirements were reduced by about 20 to 40 percent.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.81-86
• /
• 2011

This study was conducted to evaluate the genotoxcity of gamma-irradiated Undaria pinnadifida after harvest for enhancing the storage and microbial safety during drying process. The harvested seaweed was irradiated with the doses of 1 and 10 kGy. The genotoxicity was evaluated by Ames test (Salmonella typhimurium reversion assay) and SOS chromotest. The results from all samples were negative in the bacterial reversion assay with S. typhimurium TA98 and TA100. No mutagenicity was detected in the assay, at both with and without metabolic activation. The SOS chromotest also indicated that the gamma-irradiated U. pinnadifida did not show any mutagenicity. Therefore, this study indicated that gamma irradiation could be used for extending the shelf-life of U. pinnadifida.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1459-1460
• /
• 2011

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.87-92
• /
• 2014

This paper presents a new design for a piezoelectric energy harvester with the potential to harvest vibration energy over a wide range of excitation frequencies, particularly beyond the resonance frequency. The piezoelectric vibration energy harvester employs the concept of pole-zero cancellation occurring in a lever type anti-resonant system. The experimental results show that the proposed energy harvester can provide the potential possibility of a broadband piezoelectric vibration energy harvester.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.694-694
• /
• 2013

With the growing need of more effective energy harvesting, solar energy has been sought as one of the prominent candidates among the eco-friendly methods. Although many types of solar cells have been developed, the electronic conversion efficiency is limited by the material's physical properties: solar cells can only harvest solar energy from limited range in solar energy spectrum. To overcome this physical limit, we approached by using the down conversion effect, transforming the high energy photons to low energy photons, to the range the designated solar cell can convert to electronic energy. In our study, we have fabricated GaAs single junction solar cells and applied CdSe quantum dots for down-conversion. We examine the effects of such application on the solar cell efficiancy, fill-factor, JSC, VOC, etc.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.393-401
• /
• 2018

This paper reports a novel mobile-type wave energy harvesting system. The proposed system adopts a wave glider's propulsion mechanism. A wave glider's blades were mounted on a circular layout and generated a rotational motion. Combining the wave converting system with the wave glider, a mobile floating-type robotic buoy system was developed. It enabled the relocation of the buoy position, as well as station-keeping for long term operation. It had a small size and could efficiently harvest wave energy. A feasibility study and modeling were carried out, and a prototype system was constructed. Various tank tests were performed to optimize the proposed wave energy harvesting system.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.304-310
• /
• 1997

In greenhouse, a mixed solution of Mn-54, Co-60, Sr-85 and Cs-137 was applied to the soil of culture boxes 2 days before sowing cucumber and at 4 different times during its growth for measuring their transfer factors (TFs) for fruit and migration in soil. TFs varied with radionuclide, application time and harvest time by factor of up to about 60. Variations in TFs with application time showed different patterns among radionuclides. TFs decreased on the whole in the order of Sr-85 > Mn-54 > Co-60 > Cs-137. TFs of Mn-54, Co-60 and Cs-137 mixed with topsoil before sowing were a little higher than those for the soil-surface application made at an early growth stage while no difference in Sr-85 TF was found. After harvest, soil concentrations of the radionuclides applied at an early growth stage were examined. They decreased with increasing soil depth and 80${\sim}$99% of the radioactivity remained in the top 3cm. Soil pemeation of the radionuclides migration decreased in the order of Sr-85 > Mn-54 > Co-60 > Cs-137. The present data can be utilized in estimating radionuclide concentration in cucumber fruit, taking proper measures for its harvest and consumption and designing the best way of soil decontamination following an radioactive deposition during the cucummber growing season.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.90-97
• /
• 2018

Hydrophilic reactive hot-melt polyurethane adhesive(HRHA) using a hydrophilic polyol having different molecular weight and NCO index was synthesized. This HRHA was synthesized using Polyethylene glycol(PEG) as a hydrophilic polyol, Polypropylene glycol(PPG) and Polycaprolactone diol(PCL) as hydrophobic polyols, and Methylene diphenyl diisocyanate(MDI) as an isocyanate. The changes in IR spectrum, viscosity and thermal properties of HRHA with different PEG molecular weights and NCO index were investigated, and the tensile strength and elongation of the HRHA casting film and the peel strength, moisture permeability and water pressure of the HRHA coated fabric were confirmed. In this experiment, as the molecular weight of PEG and NCO index increased, the adhesive strength, tensile strength, elongation and moisture permeability was increased but viscosity and Tg was decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.286-289
• /
• 2012

In this paper, we have proposed piezoelectric energy harvester employing the pillar structure with the diameter size of 500 um. So we have selected the Su-8 photo-resist and modified lithography process to manufacture the pillar structure with height above the $500{\mu}m$. Simultaneously, we tried to make a comparative study to use ceramic bulk - polymer structure In this paper, we will report the process and properties of micro pillar structure based on the PMN-PZT ($Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrTiO_3$) materials. Finally, We will propose a method for generating electrical energy with a piezoelectric element using vibration, an energy source can be obtained from the "clean" energy.