• 제목/요약/키워드: energy dispersive X-ray spectroscopy

검색결과 639건 처리시간 0.03초

TiO2 Nanoparticles from Baker's Yeast: A Potent Antimicrobial

  • Peiris, MMK;Guansekera, TDCP;Jayaweera, PM;Fernando, SSN
    • Journal of Microbiology and Biotechnology
    • /
    • 제28권10호
    • /
    • pp.1664-1670
    • /
    • 2018
  • Titanium dioxide ($TiO_2$) has wide applications in food, cosmetics, pharmaceuticals and manufacturing due to its many properties such as photocatalytic activity and stability. In this study, the biosynthesis of $TiO_2$ nanoparticles (NPs) was achieved by using Baker's yeast. $TiO_2$ NPs were characterized by X-ray Diffraction (XRD), UV-Visible spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray analysis (EDX) studies. The XRD pattern confirmed the formation of pure anatase $TiO_2$ NPs. According to EDX data Ti, O, P and N were the key elements present in the sample. SEM and TEM revealed that the nanoparticles produced were spherical in shape with an average size of $6.7{\pm}2.2nm$. The photocatalytic activity of $TiO_2$ NPs was studied by monitoring the degradation of methylene blue dye when treated with $TiO_2$ NPs. $TiO_2$ NPs were found to be highly photocatalytic comparable to commercially available 21 nm $TiO_2$ NPs. This study is the first report on antimicrobial study of yeast-mediated $TiO_2$ NPs synthesized using $TiCl_3$. Antimicrobial activity of $TiO_2$ NPs was greater against selected Gram-positive bacteria and Candida albicans when compared to Gram-negative bacteria both in the presence or absence of sunlight exposure. $TiO_2$ NPs expressed a significant effect on microbial growth. The results indicate the significant physical properties and the impact of yeast-mediated $TiO_2$ N Ps as a novel antimicrobial.

SrAl2O4: Eu2+, Dy3+ 축광안료의 고온안정성에 관한 연구 (Thermal Stability of SrAl2O4: Eu2+, Dy3+ with Long Afterglow Phosphorescence)

  • 김진호;이승용;김태호;한규성;황광택;조우석
    • 한국세라믹학회지
    • /
    • 제51권6호
    • /
    • pp.618-622
    • /
    • 2014
  • Oxide phosphorescent phosphor has an wide application in ceramic art and decoration due to its chemical and mechanical properties. Here, phosphorescent properties of strontium aluminate phosphor ($SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$) emitting yellowish-green light was investigated with thermal treatment at $1250^{\circ}C$ under air and reducing atmosphere. The characterizations of thermally treated samples were analyzed using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), fluorescence spectrometer. $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ still showed a good phosphorescent properties after annealing process in reducing atmosphere, while phosphorescence of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ annealed in air seriously degraded, due to oxidation of $Eu^{2+}$ to $Eu^{3+}$ ions. It was also observed that $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ annealed in reducing atmosphere emitted yellowish-green light during 3 h after being exposed to sunlight.

황화급속열처리를 이용한 SnS 박막성장 및 온도의존성 연구 (Study of Growth and Temperature Dependence of SnS Thin Films Using a Rapid Thermal Processing)

  • 심지현;김제하
    • 한국전기전자재료학회논문지
    • /
    • 제29권2호
    • /
    • pp.95-100
    • /
    • 2016
  • We fabricated a tin sulfide (SnS) layer with Sn/Mo/glass layers followed by a RTP (rapid thermal processing), and studied the film growth and structural characteristics as a function of annealing temperature and time. The elemental sulfur (S) was cracked thermally and applied to form SnS polycrystalline film out of the Sn percursor at pre-determined pressures in the RTP tube. The sulfurization was done at the temperature from $200^{\circ}C$ to $500^{\circ}C$ for a time period of 10 to 40 min. At ${\leq}300^{\circ}C$, 20 min., p-type SnS thin films was grown and showed the best composition of at.% of [S]/[Sn] $${\sim_=}$$ 1 and [111] preferred orientation as investigated from using XRD (X-ray diffraction) analysis and EDS (energy dispersive spectroscopy) and SEM (scanning electron microscopy), and optical absorption by a UV-VIS spectrometer. In this paper, we report the details of growth characteristics of single phase SnS thin film as a function of annealing temperature and time associated with the pressure and ambient gas in the RTP tube.

$KNO_3$ 전해액을 이용한 Cu 전극의 전기 화학적 반응 특성 고찰 (A study on the Electrochemical Reaction Characteristic of Cu electrode According to the $KNO_3$ electrolyte)

  • 한상준;박성우;이성일;이영균;전영길;최권우;서용진;이우선
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.49-49
    • /
    • 2007
  • 최근 반도체 소자의 고집적화와 나노 (nano) 크기의 회로 선폭으로 인해 기존에 사용되었던 텅스텐이나 알루미늄 금속배선보다, 낮은 전기저항과 높은 electro-migration resistance가 필요한 Cu 금속배선이 주목받게 되었다. 하지만, Cu CMP 공정 시 높은 압력으로 인하여 low-k 유전체막의 손상과 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 본 논문에서는, $KNO_3$ 전해액의 농도가 Cu 표면에 미치는 영향을 알아보기 위해 Tafel Curve와 CV (cyclic voltammograms)법을 사용하여 전기화학적 특징을 알아보았고 scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray Diffraction (XRD) 분석을 통해 금속표면을 비교 분석하였다.

  • PDF

Effect of CrN barrier on fuel-clad chemical interaction

  • Kim, Dongkyu;Lee, Kangsoo;Yoon, Young Soo
    • Nuclear Engineering and Technology
    • /
    • 제50권5호
    • /
    • pp.724-730
    • /
    • 2018
  • Chromium and chromium nitride were selected as potential barriers to prevent fuel-clad chemical interaction (FCCI) between the cladding and the fuel material. In this study, ferritic/martensitic HT-9 steel and misch metal were used to simulate the reaction between the cladding and fuel fission product, respectively. Radio frequency magnetron sputtering was used to deposit Cr and CrN films onto the cladding, and the gas flow rates of argon and nitrogen were fixed at certain values for each sample to control the deposition rate and the crystal structure of the films. The samples were heated for 24 h at 933 K through the diffusion couple test, and considerable amount of interdiffusion (max. thickness: $550{\mu}m$) occurred at the interface between HT-9 and misch metal when the argon and nitrogen were used individually. The elemental contents of misch metal were detected at the HT-9 through energy dispersive X-ray spectroscopy due to the interdiffusion. However, the specimens that were sputtered by mixed gases (Ar and $N_2$) exhibited excellent resistance to FCCI. The thickness of these CrN films were only $4{\mu}m$, but these films effectively prevented the FCCI due to their high adhesion strength (frictional force ${\geq}1,200{\mu}m$) and dense columnar microstructures.

Preparation of Biomass Based Carbon for Electrochemical Energy Storage Application

  • Harshini Priyaa, V.S.;Saravanathamizhan, R.;Balasubramanian, N.
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권2호
    • /
    • pp.159-169
    • /
    • 2019
  • The activated carbon materials were prepared from waste biomass by ultrasonic assisted chemical activation method (UCA), ultrasonic assisted physical activation method (UPA) and Manganese nitrogen doped carbon (Mn/N-C). The XRD result shows the turbostatic (fully disordered) structure. The cyclic voltammetry test was done at 50 mV/s using 1M sodium sulfate and the values of specific capacitance were found to be 93, 100 and 115 F/g for UCA, UPA and Mn/N-C respectively. The power density values for the samples UCA, UPA and Mn/N-C were found to be 46.04, 87.97 and 131.42 W/kg respectively. The electrochemical impedance spectroscopy was done at low frequency between 1 to 10 kHz. The Nyquist plot gives the resistant characteristics of the materials due to diffusional resistance at the electrode-electrolyte interface. The Energy Dispersive X-Ray Spectroscopyanalysis (EDAX) analysis showed that the percentage doping of nitrogen and manganese were 3.53 wt% and 9.44 wt% respectively. It is observed from the experiment Mn/N-C doped carbon show good physical and electrochemical properties.

치간 삭제 후 불소 또는 수산화인회석 도포 시 재광화 및 탈회억제에 관한 연구 (Effect of remineralization and inhibition to demineralization after fluoride gel or hydroxyapatite paste application on stripped enamel)

  • 홍현실;김호영;성지영;조진형;김상철
    • 대한치과교정학회지
    • /
    • 제40권4호
    • /
    • pp.212-226
    • /
    • 2010
  • 치간 삭제 후 재광화 및 치아우식 예방법을 찾기 위한 노력의 일환으로 1.23% 인산화불소 젤 또는 5%, 10% 수산화인회석함유 페이스트를 치간 삭제된 법랑질 표면에 도포하였고, 그 후 젖산탈회용액으로 처리하였다. 법랑질 표면의 재광화 및 탈회 후 결정구조 변화를 주사전자현미경으로 관찰하고 칼슘, 인, 불소 함량 등의 변화를 energy dispersive X-ray spectroscopy로 분석해서 비교하였다. 치간 삭제 후 5%, 10% 수산화인회석함유 페이스트를 도포한 군에서 칼슘과 인 함량이 증가하였고, 1.23% 인산화불소 젤 도포 군에서는 불소 함량이 증가하였다. 또한 모든 재광화 제제에서 법랑질 표면이 매끄럽고 부드러워졌으며 결정구조가 작고 치밀해짐을 관찰할 수 있었다. 10% 수산화인회석함유 페이스트로 재광화한 군은 탈회 후에도 칼슘과 인 함량이 증가된 채로 유지되었고, 5% 수산화인회석함유 페이스트로 재광화한 군은 탈회 후 인 함량이 증가된 채로 유지되었다. 치간 삭제 후 탈회 처리 시 대조군의 법랑질은 파괴양상이 심해 거친 굴곡으로 이루어진 불규칙한 표면 상태를 나타내었으나 불소 및 수산화인회석으로 재광화한 군에서는 법랑질의 파괴양상이 적어 작은 결정입자들과 미세공극이 유지되었다.

치간 삭제 후 불소 및 수산화인회석 도포 시 법랑질 표면의 함량 및 결정구조 변화에 관한 연구 (Changes in surface content and crystal structure after fluoride gel or hydroxyapatite paste application on stripped enamel)

  • 김상철;홍현실;황영철
    • 대한치과교정학회지
    • /
    • 제38권6호
    • /
    • pp.407-415
    • /
    • 2008
  • 본 연구의 목적은 치간삭제 후 불소 및 수산화인회석 페이스트의 치면 도포에 대한 법랑질 표면의 결정구조 및 재광화를 평가하고자 하였다. 치간삭제 후 1.23% 인산화 불소 및 10% 수산화인회석 페이스트를 치면에 도포한 후 법랑질 표면의 결정구조 변화를 주사전자현미경으로 관찰하고, 법랑질 표면의 칼슘, 인, 불소 함량 등의 변화를 energy dispersive X-ray spectroscopy (ESD)로 분석하였다. 실험결과 10% 수산화인회석 페이스트 도포한 군에서 칼슘함량이 증가하였고 (p < 0.01), 치간 삭제 후 거칠었던 법랑질 표면이 매끄럽고 부드러워졌으며 법랑질 결정구조가 작고 치밀해짐을 관찰할 수 있었다. 이상의 결과는 치간삭제 후 불소 및 수산화인회식 도포가 치면 결정구조 및 재광화에 유리하다는 것을 의미한다.

Exclusion of Na+ and ClIons by the central parenchyma in leaf sheaths of rice and the involvement of lamina joint

  • Neang, Sarin;Kano-Nakata, Mana;Yamauchi, Akira;Itani, Tomio;Maekawa, Masahiko;Mitsuya, Shiro
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.237-237
    • /
    • 2017
  • Rice is highly sensitive to salt stress especially in its early growth stage, which thus is one of the major constraints in rice production. In rice plants, salt sensitivity is associated with the accumulation of $Na^+$ in the shoots, especially in the photosynthetic tissues. High salt concentrations in soil cause high $Na^+$ and $Cl^-$ transport to the shoot and preferential accumulation of those ions in older leaves, which decreases $K^+$ in the shoot, photosynthetic activity and grain yield. Salt exclusion capacity at the leaf sheath is therefore considered to be one of the main mechanisms of salt tolerance. In addition, it is suspected that the lamina joint might be involved in the salt transport from leaf sheath to leaf blade. This research aims to determine if leaf sheaths of rice exclude a large amount of $Na^+$ only or other ions such as $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ as well, to identify tissues in the leaf sheath, which accumulate $Na^+$, and to examine if the lamina joint is involved in the salt exclusion by the leaf sheath. The rice seedlings of salt tolerant genotype FL478 and salt sensitive genotype IR29 were independently treated with NaCl, KCl, $MgCl_2$ and $CaCl_2$, and Taichung 65 and its near-isogenic liguleless line (T65lg) were treated with NaCl. Then, the content of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ions and their specific location were determined using Atomic Absorption Spectrometer, Ion Chromatograph, and Energy Dispersive X-ray Spectroscopy. Results showed that leaf sheaths of FL478 and IR29 accumulated a large amount of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ons, and thus excluded them from leaf blades when treated with high concentration of each salt. When treated with NaCl, the highest $Na^+$ concentration was found in the basal part of leaf sheaths of both cultivars. Moreover, energy-dispersive X-ray spectroscopy revealed that the central parenchyma cells of the leaf sheath were the site where most Na, Cl, and K were retained under salinity in the salt tolerant genotype FL478. Also, the concentration of $Na^+$, $K^+$ and $Cl^-$ ions in leaf sheaths and leaf blades was comparable between T65 and T65lg, indicating that the lamina joint may not be involved in the exclusion of $Na^+$, $Cl^-$ and $K^+$ by the leaf sheath from the leaf blade under salinity. Therefore, we conclude that the central parenchyma cells of basal part of leaf sheath are the site that plays a physiological role to exclude $Na^+$ in the shoots of rice without the involvement of the lamina joint.

  • PDF

전기화학적 증착법에 의한 직접 메탄올 연료전지(DMFC)용 메조포러스 백금-금 합금전극제조 (Synthesis of Mesoporous Pt-Au Alloy Electrode by Electrodeposition Method for Direct Methanol Fuel Cell)

  • 박은경;안재훈;김영수;김경화;백성현
    • Korean Chemical Engineering Research
    • /
    • 제46권4호
    • /
    • pp.727-731
    • /
    • 2008
  • 계면활성제(P123)를 주형물질로 사용하여 메조포러스 구조의 Pt-Au 합금박막을 전기화학적 증착법에 의해 ITO가 코팅된 유리 위에 합성하였다. 전해질은 각각 10 mM의 $H_2PtCl_6$$HAuCl_4$의 혼합용액에 일정량의 계면활성제를 첨가하여 사용하였다. TEM(Transmission Electron Microscopy) 분석을 통하여 기공구조를 확인하였고, SEM(Scanning Electron Microscopy) 분석을 통하여 합성된 박막의 표면입자의 형태를 확인하였다. 합성된 메조포러스 구조의 Pt-Au 합금박막의 입자 함량비는 EDS(Energy Dispersive X-ray Spectroscopy) 분석으로 조사하였다. 메탄올 산화에 대한 전기화학적 촉매활성과 박막의 안정성을 평가한 결과 메조포러스 구조일 때, 넓은 표면적으로 인해 산화전류밀도가 월등히 증가함을 알 수 있었으며, 순수한 Pt박막과 비교하였을 때 소량의 Au입자의 첨가로 촉매적 안정성이 향상됨을 확인하였다.