• Journal of Korean Neurosurgical Society
• /
• v.55 no.6
• /
• pp.337-342
• /
• 2014

Objective : To determine deformity correction by postural correction and subsequent balloon inflation in acute vertebral compression fractures (OVCFs) and to examine the effect of bone mineral density on deformity correction. Methods : A totol of 50 acute OVCFs received balloon kyphoplasty. Lateral radiographs were taken and analyzed at five different time points : 1) preoperative, 2) after placing the patient in prone hyperextended position, 3) after balloon inflation, 4) after deposition of the cement, and 5) postoperative. All fractures were analyzed for height restoration of anterior (Ha), middle (Hm) and posterior (Hp) vertebra as well as Cobb angle and Kyphotic angle. The bone mineral density (BMD) of lumbar spine was measured by dual-energy X-ray absorptiometry. According to the T-score, the patients were divided into two groups which were osteoporosis group and osteopenia group. Results : Postoperative measurements of Ha, Hm and the Cobb angle demonstrated significant reduction of 4.62 mm, 3.66 mm and $5.34^{\circ}$ compared with the preoperative measurements, respectively (each p<0.05). Postural correction significantly increased Ha by 5.51 mm, Hm by 4.35 mm and improved the Cobb angle by $8.32^{\circ}$ (each p<0.05). Balloon inflation did not demonstrate a significant improvement of Ha, Hm or the Cobb angle compared with baseline prone hyperextended. Postural correction led to greater improvements of Ha, Hm and Cobb angle in osteoporosis group than osteopenia group (each p<0.05). Conclusion : In acute OVCFs, the height restoration was mainly attributed to postural correction rather than deformity correction by balloon inflation. BMD affected deformity correction in the process of postural correction.

• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.232-240
• /
• 2017

Normal moveout correction is one of the main procedures of seismic reflection data processing and a crucial pre-processing step for AVO analysis. Unfortunately, stretch phenomenon, which is the intrinsic problem of NMO correction, degrades the quality of stack section and reliability of AVO analysis. Although muting is applied to resolve this problem, it makes far-offset traces more useful to develop an advanced NMO correction technique without stretch. In this paper, easy and detailed explanations are provided on the definition and methodology of NMO correction, and then the cause of stretch is explained with its characteristics. A graphical explanation for NMO correction is given for the intuitive understanding of stretch phenomenon. Additionally, the theoretical formulation is derived to quantitatively understand the NMO correction. Through explaining the muting process to remove NMO stretch, the limitations of conventional methods are investigated and the need for a new resolution comes to discussion. We describe a stretch-free NMO correction based on inverse theory among many different stretch-free NMO corrections. Finally, the stretch-free NMO correction is verified through synthetic example and real data.

• Journal of Radiation Protection and Research
• /
• v.31 no.1
• /
• pp.47-52
• /
• 2006

A self-absorption correction is important issue for the exact radioactivity determination of gamma emitting radionuclides in environmental samples which have the range of apparent density from $0.3g/cm^3$ up to $1.5g/cm^3$. In this paper, a practical and simple method without radioactive standard solutions having various densities is proposed for the self-absorption correction of environmental samples by a developed outside beaker surrounding Marinelli beaker. For the densities of 0.8, 1.0, $1.3g/cm^3$, the corrected efficiencies by the new method and the measured those by radioactive standard solutions of the three densities showed good agreement within 4 %.

• Environmental and Resource Economics Review
• /
• v.12 no.2
• /
• pp.327-346
• /
• 2003

Unlike previous studies on the causal relationship between energy consumption and economic growth, this paper analyses the dynamic causal relationship between these variables using the dynamic vector using Johansen's multiple cointegration procedure, dynamic vector error-correction model and impulse response function. The empirical results show that while the energy consumption to a shock in income responds positively, the income responds positively to the shocks in energy consumption in the first place and then the responses become negative. We also find that the impact of energy consumption shock on the income is short-lived and causes higher inflationary pressure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.333-340
• /
• 2017

In this paper, we describe HW/SW co-optimizations for reconfigurable application specific instruction-set processors (ASIPs). Based on our previous very long instruction word (VLIW) ASIP, the proposed framework realizes various forward error-correction (FEC) algorithms for wireless communication systems. In order to enhance the energy efficiency, we newly introduce several design methodologies including high-radix algorithms, task-level out-of-order executions, and intensive resource allocations with loop-level rescheduling. The case study on the radix-4 turbo decoding shows that the proposed techniques improve the energy efficiency by 3.7 times compared to the previous architecture.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.355-357
• /
• 1996

With the wide-spread use of rectifier in electronic equipments, such problems as electronic components failures or equipment disorders have been occurred due to current harmonics. To overcome these problems, power factor correction circuits employing boost converter have been used. The switching stress of boost converter can be reduced by snubber circuit. Recently, research activities in snubber circuits have been directed to energy recovery snubber for improving the efficiency of power converter. In this study, a new passive snubber circuit which can recover trapped snubber energy without added control is proposed for boost converter The control of boost converter with proposed snubber is the same as the conventional one. In addition, the energy recovery circuit can be implemented with a few passive components. The circuit operation is confirmed through simulation.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.103-108
• /
• 1996

In this paper, a novel utility connected photovoltaic power generation system with unity power factor and uninterruptable power system facility and its control strategy are proposed. The proposed photovoltaic(PV) system is connected in parallel between utility and load. The PV system provides an uninterruptable voltage to load, a maximum power tracking to solar array, and power factor correction to the utility. The proposed system has the following advantages compared with the conventional utility connected PV system. 1. Harmonic elimination Function 2. Feeding the photovoltaic energy to the utility 3. Providing the uninterruptible power source along battery to the load In case that the photovoltaic array system is on the poor power generation, the battery and capacitor of the PV system are charged by three phase utility source and the inverter in the PV system only provides the reactive current to eliminate the harmonic current exited on the utility. In the normal operation mode, the PV system supplies active power to load and reactive power to utility in order to maintain the unity power factor and to regulate ac load voltage.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.270-275
• /
• 1998

A new single phase power factor correction rectifier/regulator with dc linked energy feedback circuit is proposed, which is capable of achieving the zero voltage switching (ZVS) of a boost rectifier stage without any auxiliary switch. The performance of the proposed rectifier/regulator is demonstrated through a 200W, 90 KHz prototype. This proposed rectifier/regulator with dc linked energy feedback circuit is particularly suited for distributed power system applications

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.9-14
• /
• 2010

The main cause of global warming is carbon dioxide generated from the use of fossil fuels, and active research on the reduction of carbon is in progress to slow down the increasing global warming. Wind turbines generate electricity from kinetic energy of wind and are considered as representative for an energy source that helps to reduce carbon emission. Since the kinetic energy of wind is proportional to the cube of the wind speed, the intensity of wind affects wind farm construction validity the most. Therefore, to organize a wind farm, validity analysis should be conducted first through measurement of the wind resources. To facilitate the approval and permission and reduce installation cost, measuring sensors should be installed at locations below the actual wind turbine hub. Wind conditions change in shape with air density, and air density is most affected by the variable sterrain and surface type. So the magnitude of wind speed depends on the ground altitude. If wind conditions are measured at a location below the wind turbine hub, the wind speed has to be extrapolated to the hub height. This correction of wind speed according to height is done with the Deacon equation used in the statistical analysis of previously observed data. In this study, the optimal Deacon equation parameter was obtained through the analysis of the correction of the wind speed error with the Deacon equation based on the characteristics of terrain.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.939-944
• /
• 2015

The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a $^{252}Californium$ ($^{252}Cf$) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1-9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered.