• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.60-67
• /
• 2015

The finite element (FE) model updating is a commonly used approach in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE model updating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the initial FE model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems including material and sectional properties, the boundary conditions have been considered yet to be difficult to accurately estimate as the acceleration responses only correspond to translational degree-of-freedoms (DOF). Recent advancement in the sensor technology has enabled low-cost, high-precision gyroscopes that can be adopted in the FE model updating to provide angular information of a structure. This study proposes a FE model updating strategy based on data fusion of acceleration and angular velocity. The usage of both acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. A numerical simulation on a simply supported beam is presented to demonstrate the proposed FE model updating approach.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.689-699
• /
• 2003

This study was to examine characteristics of treating toluene vapor, which gets to be problematic due to its harmful carcinogenicity and mass generation from various sources, through a biological treatment facility which is environment-friendly and adopts a high-efficient and low-cost clean technology. In order to identify whether Alnus Firma Fruit (AFF) can be used as a media for a bioreactor, its utility and basic operating factors, a study was conducted on pressure drop, supply of nutrient substances and retention time which are operating factors of a biofilter, and eliminating characteristics were compared between AFF and the conventional biological activatedcarbon (BAC) widely used as filter media. In the case of AFF, the initial microbial deposits was 2.3${\times}$10$^{7}$ CFU/g dry AFF, which represents the initial microbial density higher than the case of BAC showing 5.5${\times}$10$^{6}$ CFU/g dry BAC And it took about 2 weeks to acclimate until its eliminating rate got to be increased over 90%. As a result of comparing pressure loss taking place with the lapse of time between BAC and AFF, after 130 days passed at SV 25h$^{-1}$ , BAC showed that its eliminating efficiency had a tendency to drop greatly due to a great pressure loss (0.53\longrightarrow54.7 mm$H_2O$/m) caused by an excess of biomass as accumulated. On the other hand. AFF showed that the pressure drop was 0.53 mm$H_2O$/m, about 2 times as much as the initial pressure loss of 0.4 mm$H_2O$/m, which represents no great change in the pressure loss, and its eliminating efficiency was also shown to be continuously high. Therefore, when AFF was used as a filler for a biological treatment facility, a biological filter enabling improvement of the purifying efficiency to be promoted could be provided, and moreover, the pressure loss was so small that the filler replacement cycle or the back flushing cycle could be extended. So, even in terms of the operating cost, it was identified to be an economical filler When an inorganic material was used as a filler, the biofilters performance acted sensitively on whether nutrient substances were supplied or not. In the case of AFF with low adsorptivity, addition of ethyl-alcohol increased the solubility of toluene, and consequently, biodegradation got to be actively made by microbes, and thus, its eliminating rate could be increased. As the flow velocity and the inflow concentration got to be more increased, its eliminating rate got to be lower, and particularly, an increase in the flow velocity made its eliminating rate drop more greatly than an increase in the concentration.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.213-228
• /
• 2010

The composition of Chinese ceramic shards has been the subject of analysis in Europe, beginning in the 18th century, and in China from the 1950s. Scientific studies of traditional Korean shards commenced in the United States and Germany in the 1980s, and studies within Korea began in the 1990s. From analysis of a large systematically collected dataset, the composition of porcelain produced during the Kory. dynasty, including 21 celadon and 10 whiteware groups, was characterized and compared with that of Chinese ceramics. The average composition of the body and glaze of several shards (usually three to five) from each group was determined, enabling comparisons between groups. The results show that the majority of groups were derived from mica-quartz porcelain stone, which was commonly used in Yuezhou, Jingdezhen, and other southern Chinese kilns. The composition of glazes includes clay and flux components; the latter were typically wood ash and limestone, initially as burnt but later as crushed forms. The earliest of the Kangjin glazes contained substantially less titanium oxide than did the Yuezhou glazes, which were typically formulated from body material and wood ash. The present study provides a comparative framework for the growing number of analytical investigations associated with excavations occurring in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.49-56
• /
• 2001

The possibility of a noise reduction of piezoelectric single Panels is experimentally studied. Piezoelectric single panel is basically a plate structure on which piezoelectric patch with shunt circuit is mounted. The use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. Piezo-damping is implemented by using a newly proposed tuning method. This method is based on electrical impedance model and maximizing the dissipated energy at the shunt circuit. By measuring the electrical impedance at the piezoelectric patch bonded on a structure, an equivalent electrical model is constructed near the system resonance frequency. Resonant shunt circuit for piezoelectric shunt damping is composed of register and inductor in series, and they are determined by maximizing the dissipated energy throughout the circuit. The transmitted noise reduction performance of single Panel is tested on an acoustic tunnel. The tunnel is a tube with a square cross section and a loud speaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across Panels is measured. By enabling the piezoelectric shunt damping noise reduction is achieved at the resonance frequencies as well. Piezoelectric single panel with piezoelectric shunt damping is a promising technology for noise reduction in a broadband frequency.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2014

Kompsat-3 is an optical high-resolution earth observation satellite launched in May 2012. In addition to its 0.7m spatial resolution, Kompsat-3 is capable of in-track stereo acquisition enabling quality Digital Elevation Model(DEM) generation. Typical DEM generation procedure requires accurate control points well-distributed over the entire image region. But we often face difficult situations especially when the area of interests is oversea or inaccessible area. One solution to this is to use existing geospatial data even though they only cover a part of the image. This paper aimed to assess accuracy of DEM from Kompsat-3 with different scenarios including no control point, Rational Polynomial Coefficients(RPC) relative adjustment, and RPC adjustment with control points. Experiments were carried out for Kompsat-3 stereo data in USA. We used Digital Orthophoto Quadrangle(DOQ) and Shuttle Radar Topography Mission(SRTM) as control points sources. The generated DEMs are compared to a LiDAR DEM for accuracy assessment. The test results showed that the relative RPC adjustment significantly improved DEM accuracy without any control point. And comparable DEM could be derived from single control point from DOQ and SRTM, showing 7 meters of mean elevation error.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.150-159
• /
• 2002

The possibility of a broadband noise reduction of piezoelectric smart panels is experimentally studied. Piezoelectric smart panel is basically a plate structure on which piezoelectric patch with shunt circuits is mounted and sound absorbing material is bonded on the surface of the structure. Sound absorbing materials can absorb the sound transmitted at mid frequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to tune the piezoelectric shunt circuit, the measured electrical impedance model is adopted. Resonant shunt circuit composed of register and inductor in stories is considered and the circuit parameters are determined based on maximizing the dissipated energy through the circuit. The transmitted noise reduction performance of smart panels is investigated using an acoustic tunnel. The tunnel is a square crosses sectional tunnel and a loud speaker is mounted at one side of the tunnel as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across the panels is measured. Noise reduction performance of a double smart panel possessing absorbing material and air gap shows a good result at mid frequency region except the first resonance frequency. By enabling the piezoelectric shunt damping, noise reduction is achieved at the resonance frequency as well. Piezoelectric smart panels incorporating passive method and piezoelectric shunt damping are a promising technology for noise reduction in a broadband frequency.

• Journal of Distribution Research
• /
• v.12 no.2
• /
• pp.23-49
• /
• 2007

Recently, mobile marketing is becoming one of the major topics of interest to the marketing discipline. Emerging from rapid developments in mobile technology, it has created opportunities for new and innovative mobile services. Also, it is enabling to conduct always-on connections that consumers can interact anytime and anywhere. Especially, mobile devices place themselves to the core means of mobile-commerce which to execute a function as a distribution channel in mobile environments. Although the adoption researches about innovative services or technologies had executed in marketing areas over the past decades, most researches just expanded or modified existing theories and explanation models. There has been little study on the comprehensive and systematic review of adoption process. Therefore, it deserves to be considered prior usage experiences of the existing channels(CL) and attractiveness of the new channel(CLalt) based on social exchange theory. In order to address this void, this study unifies components of perceived attributes in the each dimensions (ie. benefit, cost, and risk dimensions) and explores prior usage experiences of the existing channels on adoption intention in electronic financial service channels through developing comprehensive model and employing empirical test for the hierarchy of effects model. Based on these empirical results, this study suggests managerial implications for new channel management in electronic financial service areas by focusing on the prior usage experiences of the existing objects on adoption intention and perceived attributes of ubiquitous-based mobile service channel.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.65-72
• /
• 2008

Mobile Collaboration is an enabling technology that makes users share information between mobile devices and various Mobile P2P platforms have been designed and implemented for it. There are, however, few research papers on application of SIP protocol to spatial data sharing on mobile devices. In this paper, SIP based real time sharing framework is proposed to compose a mobile P2P platform on which spatial data can be trans(erred. A new protocol based on WKT and WKB is defined to send and receive spatial objects with SIP MESSAGE method. Base maps such as digital maps and parcel maps can be provided by a map server that is integrated with SIP server after a new SIP session established and client agents are registered. The framework proposed based onSIP enables users to transfer spatial data such as maps and satellite images directly between mobile devices during VoIP based voice call and therefore, mobile applications can be applied in various domains such asforest management and national defense.

• Korean Business Review
• /
• v.18 no.2
• /
• pp.133-149
• /
• 2005

DAB is meeting with mixed success. Denmark is performing similarly to the UK thanks to the innovation of the public broadcaster but where DAB is not so strong, the problem can usually be pointed at the lack of enabling regulation. The UK's example, whilst not appropriate everywhere, has valuable lessons including licensing incentives for existing analogue commercial broadcasters and a market-building obligation on the national multiplex licensee. Despite the obvious success of DAB, it would be an omission to leave some of the continued criticisms unanswered, whether of its slow start or the underlying technology. True, there was much over-optimism in the mid-1990s, coupled with unrealistic promises and expectations of receiver pricing and consumer take-up. Governments across Europe have legislated for DAB digital radio in a variety of ways but few as successfully as the UK. It is essential that both public and private broadcasters are encouraged equally to participate in digital radio. The UK is fortunate because, for the last 10 years, there has been a progressive government policy towards digital broadcasting. The 1996 Broadcasting Act set out a full licensing regime for both digital television and digital radio. The 1996 UK legislation contained a number of key elements which have been cornerstones of its success. DAB digital radio began test broadcasting around ten years ago but it has not been a universal consumer success across Europe. In the UK, however, digital radio receivers are one of the fastest-selling consumer electronics products and sales have overtaken those of analogue radios. Why has the UK succeeded with DAB digital radio when other European countries have yet to see their markets take off? This article explains what steps the UK took to make DAB digital radio a success.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.2
• /
• pp.155-169
• /
• 2010

This study aims to design practical problem-focused instruction by applying universal design of "Housing" unit of Technology Home Economics in the 10th grade and examine the students' perception on the lesson. The lesson is composed of the following procedures: thinking, problem recognition, problem understanding, information search & alternative search, consideration of the result, and practice plan. To solve problem such as 'What should one do for everyone's convenient and comfortable residential life' practically, we chose the major concern of 'understanding the universal design', 'analysis of cause for environmental change', 'creation of human-concerned residential culture'and performed alternative experience program for the old, the pregnant and the disabled. The students perceived teaching methods and contents positively with interest. They also understood the lesson easily by experiential activity and discussion thus enabling their active participation. It was also found out that the students felt considerable change of their consciousness of living environment of residence and the local community, thus it is concluded that the practical problem-focused instructional design method is very effective.