• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.579-584
• /
• 2006

Aluminum Resistance Spot Weld(Al RSW) is an enabling technology for body assembly of low mass fraction vehicles. Due to the unreliable durability of spot-welded joints, applications of Al RSW are limited. This study presents experimental investigation on the use of a post-weld cold working process to improve the fatigue strength of Al RSW. The post-weld cold working process includes special shaped indenters that are pressed or driven into the structure to induce compressive residual stresses. The mechanical properties of the post-weld cold worked Al RSW were investigated, including the experimental results of fatigue and micro-hardness tests. Comparisons of the mechanical properties and qualitative results between the as-welded RSW specimens and the post-weld cold worked RSW specimens are discussed. The post-weld cold worked Al RSW samples had an increase in both microhardness and fatigue life.

• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.19-22
• /
• 2017

SI process is one of the most advanced thermochemical water splitting cycles enabling mass production of hydrogen without emitting carbon dioxide when coupled to nuclear heat energy. The highest temperature (close to $1000^{\circ}C$) required in SI process is well matched with the outlet temperature of a coolant circulating a high-temperature gas-cooled reactor at around $950^{\circ}C$. In Section 3, some heat exchangers are included to recover heats from process flows at high temperature. In this work, we designed a heat exchanger based on the $1Nm^3/hr$ $H_2$ production capacity using commercial tools for chemical process design.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.234-237
• /
• 2007

We report on our experience on utilization of collaborative tools for KISTI high energy physics group. Our main subject will be the new EVO (Enabling Virtual Organization) server that we hosted recently at KISTI. The EVO is a next generation collaborative tool from CalTech high energy physics group with several improvements from its predecessor VRVS (Virtual Room Videoconferencing System). EVO has the same baseline structure as in VRVS. The network of servers lies at the heart of EVO structure and one server called Panda communicates with local clients called Koala.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.227-232
• /
• 2001

IPresented is a small and handy remotely piloted vehicle(RPV) that can be used for military and non-military surveillance operations. The RPV is equipped with an on-board high resolution color camera to transmit the analog video images and on-board electronics to provide real-time flight information to the pilot, thereby enabling him/her to remotely pilot within the range of 5 km radius. This paper describes the RPV system including its design, manufacturing and flight test results which manifest the stability of on-board mission and flight equipment as well as the remote piloting capability. A future plan for necessary improvements identified from the flight tests are also discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.376-377
• /
• 2006

Chemical Mechanical Planarization (CMP) has emerged as an enabling technology for the manufacturing of multi-level metal interconnects used in high-density Integrated Circuits (IC). Recently, multi-level structures have been also widely used m the MEMS device such as micro engines, pressure sensors, micromechanical fluid pumps, micro mirrors and micro lenses. Especially, among the thin films available in IC technologies, polysilicon has probably found the widest range of uses in silicon technology based MEMS. This paper presents the characteristic of polysilicon CMP for multi-level MEMS structures. Two-step CMP process verifies that is possible to decrease dishing amount with two type of slurries characteristics. This approach is attractive because two-step CMP process can be decreased dishing amount considerably more then just one CMP process.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.3
• /
• pp.23-27
• /
• 2008

The Paper presents some potential new uses for Head-Up Displays (HUDs) in vehicular applications, where the information conveyed to the driver goes well beyond the content of today's production HUDs. Such information potentially related to the use of cellular telephones, navigation systems, vehicle to roadside communications systems, and many others. Improvements in flat panel display technologies are enabling the presentation of larger, more reconfigurable, more daylight-viewable HUD images. In addition, A Formal test and evaluation is proposed to ensure that new information displays support the driver tasks. The above developments suggest increased future opportunities for HUDs to present useful information in an as-needed, eyes-on-the-road manner.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.203-206
• /
• 2006

The drawbeads, which is used for controlling the flow of the sheet by imposing the tension and for preventing the springback in the sheet metal forming process, affects a lot the formability because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining forces and the drawbead opening forces associated with various drawbead shapes and dimensions and their theoretical evaluation are introduced and verified through the experimental measurement of those of a circular drawbead.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2012

This paper shows an effective scanning trajectory for a mine detection device that is one of the mission equipments of unmanned ground vehicle. The mine detection device is composed of a mine-detection sensor, and a 4 DOF manipulator enabling sensor position control. There are three modes that manage the mine detection device: passive, semi-automatic, and automatic. The automatic mode is used the most. This paper suggests a scanning method that makes shape of 8. This method prevents missing target area and enhances scanning speed when the mine detection device scans the ground surface in automatic mode. The suggested method is verified by simulations and experiments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.466-469
• /
• 2006

We have developed the world's thinnest flexible electrophoretic displays (EPDs). The thin-film displays are 95 ..m thick, which is nearly the same thickness as a standard sheet of paper. Weighing 0.44g including external connection cables, these displays are also probably the world's lightest. We have also developed 7.1-inch-diagonal(paperback-sized) high-resolution flexible EPDs. The displays are large enough to be used as practical e-paper. More than 7 million transistors work correctly on plastic, enabling us to see 3-megapixel images. These flexible displays include active-matrix TFT devices that are fabricated using Suftla transfer technology. Suftla technology demonstrates the potential to achieve thin, flexible displays that will be used as an e-paper in the near future.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.102.2-102
• /
• 2001

In this study, a solid-state laser system adopting a new real time multi-discharge (RTMD) method in which three flashlamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC one-chip microprocessor, With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and the real-time control is possible with an external keyboard, enabling various pulse shapes. In addition, longer pulses can be more widely used for industrial processing and lots of medical purposes.