• Macromolecular Research
• /
• 제17권6호
• /
• pp.397-402
• /
• 2009

In emulsifier-free, emulsion polymerization with ionizable comonomer, the ionization of the comonomer is critical in determining the size of the final polymerie particles at sub-micrometer scale. In this study, polystyrene latex beads with carboxylates on the surface were synthesized using acrylic acid as a comonomer. Specifically, ammonium hydroxide was added to the emulsifier-free polymerization system to promote the ionization of acrylic acid by increasing pH. Smaller polystyrene latex particles were produced by increasing the ammonium hydroxide concentration in the reaction system, due to the enhanced stability promoted by the ionization of acrylic acid during the nucleation step. In addition, the surface morphology of the polystyrene latex particles was controlled by the concentration of acrylic acid, the dissociation of which was influenced by the ammonium hydroxide concentration.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.7-14
• /
• 1993

Nowadays, microspheres are expected to be applied to biomedical areas and many studies are being performed. For biomedical applications, many kinds of microspheres were synthesized by emulsion polymerization, emulsifier-free emu]sion polymerization, and emulsifier-free emulsion polymerization with ionic surface-active comonomers. Further synthesis techniques about microencapsulation and magnetic microspheres are introduced. Among the practical applications of microspheres, some interesting subjects are introduced. These include solid-phase immunoassays, labeling and identification of lymphocyte populations, extracorporeal and hemoperfusion systems, drug delivery systems, and immunomagnetic cell separation. In addition, basic theories, problems and research trends are also introduced.

• 폴리머
• /
• 제34권6호
• /
• pp.491-494
• /
• 2010

무유화 에멀젼 공중합법을 이용하여 180~200 nm의 지름을 가지는 단분산성 폴리(스티렌/디비닐벤젠/비닐 아세테이트) [poly(ST-co-DVB-co-VAc)] 고분자 나노입자를 합성하였으며, 제조된 단분산성 고분자 나노입자의 표면을 비누화반응을 통하여 개질하여 단분산성 폴리(스티렌/디비닐벤젠/비닐알코올) [poly(ST-co-DVB-co-VA)] 나노입자를 제조하였다. 합성된 입자를 반응염료와 반응시켜 적색과 청색 단분산성 폴리(스티렌/디비닐벤젠/비닐알코올) 나노입자를 제조하였으며, 입자의 형태, 분산성 및 표면전하를 전자현미경, 시차열분석기, UV/Vis 흡광기 및 제타 전하 측정장치를 이용하여 규명하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.995-997
• /
• 2003

In this study, we have investigated the positively charged polymer particles using emulsifier-free emulsion polymerization for applications in electrophoretic displays. The FT-IR, Zeta potential and SEM characteristics showed that by emulsifier-free polymerization, the positively charged polymer particles were manufactured. Using these particles, we can obtain well-dispersed white latex particles in dielectric suspending media.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.185-191
• /
• 2009

Polystyrene/multi-walled carbon nanotube (PS/MWCNT) composites were prepared by the use of latex technology. The monodisperse PS latex was synthesized by an emulsifier-free emulsion polymerization from styrene/potassium persulfate/water system in the presence of ethanol. The MWCNTs were first treated with acid mixture to eliminate impurities, dispersed in deionized water driven by ultrasonicator, and then mixed with the PS latex. From these mixtures, PS/MWCNT composites were prepared by freeze-drying and subsequent compression molding. In the small-amplitude oscillatory shear experiments, both complex viscosity and storage modulus increased with increasing MWCNT content. A pronounced effect of MWCNT content was observed, resulting in larger storage modulus and stronger yield behavior at low frequencies when compared to unmodified PS. It showed a transition from viscous to elastic behavior with increasing MWCNT content. Over the MWCNT content of 3 wt%, the storage modulus was higher than the loss modulus across all frequencies.

• 폴리머
• /
• 제28권6호
• /
• pp.524-530
• /
• 2004

스티렌, 폴리(에틸렌 글리콜) 메타크릴레이트 (PEG-MMA) 혹은 폴리(에틸렌 글리콜) 디메타크릴레이트 (PEG-diMMA)를 중성 매질에서 무유화제 (emulsifier-free) 유화 중합하여 표면에 에틸렌 글리콜기를 갖는 폴리스티렌 입자를 합성하였고, 이로부터 동결 건조되어진 분말을 제조하였다. 고분자 분말은 FT-TR 분광기로 구조를 확인하였고, 광산란 입도 분석기와 주사 전자 현미경 (SEM)을 이용하여 입자 크기와 분산도를 조사하였다. 스티렌에 대하여 공단량체 PEG-MMA는 2∼5 mol%, PEG-diMMA는 1 mol% 농도 부근에서 균일한 입자 크기를 얻을 수 있었다. 합성된 입자의 표면 전하를 유전 매질 내에서 ELS-8000 광산란법을 이용하여 제타 포텐셜을 측정하였다. 스티렌에 대하여 PEG-MMA 5 mol%에서 183 mV의 아주 높은 제타 포텐셜이 측정되었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.53-53
• /
• 2002

Alkali-soluble random copolymer (ASR) was used as a functional resin in the emulsion polymerization of styrene to prepare structured nanoparticles. The calorimetric technique was applied to study the kinetics of emulsion polymerization of styrene using ASR and conventional ionic emulsifier, sodium dodecyl benzene sulfonate (SDBS). ASR could form aggregates like micelles and the solubilization ability of the aggregates was dependent on the neutralization degree of ASR. The rate of polymerization in ASR system was lower than that in SDBS system. This result can be explained by the creation of a hairy ASR layer around the particle surface, which decreases the diffusion rate of free radicals through this region. Although a decrease in particle size was observed, the rate of polymerization decreased with increasing ASR concentration. The higher the concentration of ASR is, the thicker and denser ASR layer may be, and the more difficult it would therefore be for radicals to reach the particle through this layer of ASR. The rate of polymerization decreased with increasing the neutralization degree of ASR. The aggregates with high neutralization of ASR are less efficient in solubilizing the monomer and capturing initiator radicals than that of the lower neutralization degree, which leads to decrease in rate of polymerization.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.194-198
• /
• 2006

Polystyrene, PS, particles of 450 nm diameter and poly(styrene-co-styrene sulfonate), PSS, particles of 140-160 nm diameter were prepared by emulsifier-free emulsion polymerization. The surfaces of the PS and PSS particles were coated with Ag nanoparticles for the application of antimicrobial agents by reduction of Ag ions using ${\gamma}$-irradiation. The Ag-PS and Ag-PSS were characterized by High-Resolution Transmittance Electron Microscopy (HR-TEM), Field-Emission Scanning Electron Microscopy (FE-SEM), and Energy Dispersive X-ray Spectroscopy (EDXS). The HR-TEM and EDXS data showed that the Ag nanoparticles were loaded on the surface of the PS and PSS particles, respectively. The antimicrobial efficiency of the Ag-PS and Ag-PSS particles (0.4 g) with ca. 100 ppm Ag, which was coated onto yam (KS K 0905-1996 rule), was tested against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352 after 100 washing cycles (KS K 0432-1999 rule). The antimicrobial efficiency of the Ag-PS particles against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352 was 99.9% after 100 cycles washing., confirming that the Ag-PS particles can be used as antimicrobial agents.

• Elastomers and Composites
• /
• 제28권4호
• /
• pp.267-273
• /
• 1993

A number of hydrophilic acrylic comonomers were incorporated into styrene-butadiene soap-free emulsion polymerization. It was found that reaction rate decreased according to : AN>AA>MMA>EA>IA>AAM>MA>HEMA. It was also observed that reaction rate increased with decreasing H-bonding factor contribution to the solubility parameter of the hydrophilic comonoer. The SBR latexes were very monodisperse with the particle size distribution of $1.03{\times}1.12$. Since growth rate is proportional to polymerization time, the difference in conversion rates between various comonomers was resulted from the particle number density of SBR latexes for the various hydrophilic comonomers. It was also found that the colloidal stability of the latexes was excellent because no external emulsifier was incorporated.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.27-32
• /
• 2003

The core-shell latex particles were prepared by sequential emulsion polymerization of alkyl methacrylate and styrene(ST) by using an water-soluble initiator(APS) after preparing monomer pre-emulsion in the presence of an anionic surfactant(SDBS). In organic/organic core-shell polymerization, the pre-emulsion method, which minimized required quantity of sulfactant, has been used to increase the conversion rate and the stability of core-shell latex particles as well as to reduce the formation of secondary particle that cause problems of soap-free emulsion during shell polymerization. We used several methods to observe the core-shell structure. The core-shell structure was studied by measuring pH change during hydrolysis by NaOH, glass transition temperature($T_g$) by differential scanning calorimeter(DSC), morphology of latex by transmission electron microscope(TEM) and change of particle size and distribution by a particle analyzer.